* Re: [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs
2016-11-04 5:06 ` [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs Joel Holdsworth
@ 2016-11-04 15:09 ` atull
2016-11-07 0:46 ` Joel Holdsworth
2016-11-04 15:48 ` atull
1 sibling, 1 reply; 6+ messages in thread
From: atull @ 2016-11-04 15:09 UTC (permalink / raw)
To: Joel Holdsworth
Cc: moritz.fischer, geert, robh, devicetree, linux-kernel, linux-spi, marex
On Fri, 4 Nov 2016, Joel Holdsworth wrote:
> The Lattice iCE40 is a family of FPGAs with a minimalistic architecture
> and very regular structure, designed for low-cost, high-volume consumer
> and system applications.
>
> This patch adds support to the FPGA manager for configuring the SRAM of
> iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
> UltraPlus devices, through slave SPI.
>
> The iCE40 family is notable because it is the first FPGA family to have
> complete reverse engineered bit-stream documentation for the iCE40LP and
> iCE40HX devices. Furthermore, there is now a Free Software Verilog
> synthesis tool-chain: the "IceStorm" tool-chain.
>
> This project is the work of Clifford Wolf, who is the maintainer of
> Yosys Verilog RTL synthesis framework, and Mathias Lasser, with notable
> contributions from "Cotton Seed", the main author of "arachne-pnr"; a
> place-and-route tool for iCE40 FPGAs.
>
> Having a Free Software synthesis tool-chain offers interesting
> opportunities for embedded devices that are able reconfigure themselves
> with open firmware that is generated on the device itself. For example
> a mobile device might have an application processor with an iCE40 FPGA
> attached, which implements slave devices, or through which the processor
> communicates with other devices through the FPGA fabric.
>
> A kernel driver for the iCE40 is useful, because in some cases, the FPGA
> may need to be configured before other devices can be accessed.
>
> An example of such a device is the icoBoard; a RaspberryPI HAT which
> features an iCE40HX8K with a 1 or 8 MBit SRAM and ports for
> Digilent-compatible PMOD modules. A PMOD module may contain a device
> with which the kernel communicates, via the FPGA.
> ---
> drivers/fpga/Kconfig | 6 ++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/ice40-spi.c | 198 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 205 insertions(+)
> create mode 100644 drivers/fpga/ice40-spi.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index d614102..85ff429 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -13,6 +13,12 @@ config FPGA
>
> if FPGA
>
> +config FPGA_MGR_ICE40_SPI
> + tristate "Lattice iCE40 SPI"
> + depends on SPI
> + help
> + FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
> +
> config FPGA_MGR_SOCFPGA
> tristate "Altera SOCFPGA FPGA Manager"
> depends on ARCH_SOCFPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8d83fc6..adb5811 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -6,5 +6,6 @@
> obj-$(CONFIG_FPGA) += fpga-mgr.o
>
> # FPGA Manager Drivers
> +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
> obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
> obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
> new file mode 100644
> index 0000000..a977f19
> --- /dev/null
> +++ b/drivers/fpga/ice40-spi.c
> @@ -0,0 +1,198 @@
> +/*
> + * FPGA Manager Driver for Lattice iCE40.
> + *
> + * Copyright (c) 2016 Joel Holdsworth
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This driver adds support to the FPGA manager for configuring the SRAM of
> + * Lattice iCE40 FPGAs through slave SPI.
> + */
> +
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_gpio.h>
> +#include <linux/spi/spi.h>
Hi Joel,
The build breaks without this:
#include <linux/module.h>
Alan
> +
> +#define ICE40_SPI_FPGAMGR_RESET_DELAY 1 /* us (>200ns) */
> +#define ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY 1200 /* us */
> +
> +#define ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BITS 49 /* bits */
> +
> +struct ice40_fpga_priv {
> + struct spi_device *dev;
> + struct gpio_desc *reset;
> + struct gpio_desc *cdone;
> +};
> +
> +static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> +
> + return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
> + FPGA_MGR_STATE_UNKNOWN;
> +}
> +
> +static int ice40_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
> + const char *buf, size_t count)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> + struct spi_device *dev = priv->dev;
> + struct spi_message message;
> + int ret;
> +
> + if ((flags & FPGA_MGR_PARTIAL_RECONFIG)) {
> + dev_err(&dev->dev,
> + "Partial reconfiguration is not supported\n");
> + return -ENOTSUPP;
> + }
> +
> + /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
> + spi_bus_lock(dev->master);
> +
> + gpiod_set_value(priv->reset, 1);
> +
> + spi_message_init(&message);
> + spi_message_add_tail(&(struct spi_transfer){.cs_change = 1,
> + .delay_usecs = ICE40_SPI_FPGAMGR_RESET_DELAY}, &message);
> + ret = spi_sync_locked(dev, &message);
> + if (ret) {
> + spi_bus_unlock(dev->master);
> + return ret;
> + }
> +
> + /* Come out of reset */
> + gpiod_set_value(priv->reset, 0);
> +
> + /* Check CDONE is de-asserted i.e. the FPGA is reset */
> + if (gpiod_get_value(priv->cdone)) {
> + dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
> + spi_bus_unlock(dev->master);
> + return -EIO;
> + }
> +
> + /* Wait for the housekeeping to complete, and release SS_B */
> + spi_message_init(&message);
> + spi_message_add_tail(&(struct spi_transfer){
> + .delay_usecs = ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY}, &message);
> + ret = spi_sync_locked(dev, &message);
> +
> + spi_bus_unlock(dev->master);
> +
> + return ret;
> +}
> +
> +static int ice40_fpga_ops_write(struct fpga_manager *mgr,
> + const char *buf, size_t count)
> +{
> + return spi_write(((struct ice40_fpga_priv *)mgr->priv)->dev,
> + buf, count);
> +}
> +
> +static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> + struct spi_device *dev = priv->dev;
> +
> + /* Check CDONE is asserted */
> + if (!gpiod_get_value(priv->cdone)) {
> + dev_err(&dev->dev,
> + "CDONE was not asserted after firmware transfer\n");
> + return -EIO;
> + }
> +
> + /* Send of zero-padding to activate the firmware */
> + return spi_write(dev, NULL, (ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BITS +
> + dev->bits_per_word - 1) / dev->bits_per_word);
> +}
> +
> +static const struct fpga_manager_ops ice40_fpga_ops = {
> + .state = ice40_fpga_ops_state,
> + .write_init = ice40_fpga_ops_write_init,
> + .write = ice40_fpga_ops_write,
> + .write_complete = ice40_fpga_ops_write_complete,
> +};
> +
> +static int ice40_fpga_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct device_node *np = spi->dev.of_node;
> + struct ice40_fpga_priv *priv;
> + int ret;
> +
> + if (!np) {
> + dev_err(dev, "No Device Tree entry\n");
> + return -EINVAL;
> + }
> +
> + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = spi;
> +
> + /* Check board setup data. */
> + if (spi->max_speed_hz > 25000000) {
> + dev_err(dev, "Speed is too high\n");
> + return -EINVAL;
> + } else if (spi->mode & SPI_CPHA) {
> + dev_err(dev, "Bad mode\n");
> + return -EINVAL;
> + }
> +
> + /* Set up the GPIOs */
> + priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
> + if (IS_ERR(priv->cdone)) {
> + dev_err(dev, "Failed to get CDONE GPIO: %ld\n",
> + PTR_ERR(priv->cdone));
> + return ret;
> + }
> +
> + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(priv->reset)) {
> + dev_err(dev, "Failed to get CRESET_B GPIO: %ld\n",
> + PTR_ERR(priv->reset));
> + return ret;
> + }
> +
> + /* Register with the FPGA manager */
> + ret = fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
> + &ice40_fpga_ops, priv);
> + if (ret) {
> + dev_err(dev, "unable to register FPGA manager");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ice40_fpga_remove(struct spi_device *spi)
> +{
> + fpga_mgr_unregister(&spi->dev);
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id ice40_fpga_of_match[] = {
> + { .compatible = "lattice,ice40-fpga-mgr", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
> +#endif
> +
> +static struct spi_driver ice40_fpga_driver = {
> + .probe = ice40_fpga_probe,
> + .remove = ice40_fpga_remove,
> + .driver = {
> + .name = "ice40spi",
> + .of_match_table = of_match_ptr(ice40_fpga_of_match),
> + },
> +};
> +
> +module_spi_driver(ice40_fpga_driver);
> +
> +MODULE_AUTHOR("Joel Holdsworth <joel@airwebreathe.org.uk>");
> +MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs
2016-11-04 5:06 ` [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs Joel Holdsworth
2016-11-04 15:09 ` atull
@ 2016-11-04 15:48 ` atull
1 sibling, 0 replies; 6+ messages in thread
From: atull @ 2016-11-04 15:48 UTC (permalink / raw)
To: Joel Holdsworth
Cc: moritz.fischer, geert, robh, devicetree, linux-kernel, linux-spi, marex
On Fri, 4 Nov 2016, Joel Holdsworth wrote:
> The Lattice iCE40 is a family of FPGAs with a minimalistic architecture
> and very regular structure, designed for low-cost, high-volume consumer
> and system applications.
>
> This patch adds support to the FPGA manager for configuring the SRAM of
> iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
> UltraPlus devices, through slave SPI.
>
> The iCE40 family is notable because it is the first FPGA family to have
> complete reverse engineered bit-stream documentation for the iCE40LP and
> iCE40HX devices. Furthermore, there is now a Free Software Verilog
> synthesis tool-chain: the "IceStorm" tool-chain.
>
> This project is the work of Clifford Wolf, who is the maintainer of
> Yosys Verilog RTL synthesis framework, and Mathias Lasser, with notable
> contributions from "Cotton Seed", the main author of "arachne-pnr"; a
> place-and-route tool for iCE40 FPGAs.
>
> Having a Free Software synthesis tool-chain offers interesting
> opportunities for embedded devices that are able reconfigure themselves
> with open firmware that is generated on the device itself. For example
> a mobile device might have an application processor with an iCE40 FPGA
> attached, which implements slave devices, or through which the processor
> communicates with other devices through the FPGA fabric.
>
> A kernel driver for the iCE40 is useful, because in some cases, the FPGA
> may need to be configured before other devices can be accessed.
>
> An example of such a device is the icoBoard; a RaspberryPI HAT which
> features an iCE40HX8K with a 1 or 8 MBit SRAM and ports for
> Digilent-compatible PMOD modules. A PMOD module may contain a device
> with which the kernel communicates, via the FPGA.
> ---
> drivers/fpga/Kconfig | 6 ++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/ice40-spi.c | 198 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 205 insertions(+)
> create mode 100644 drivers/fpga/ice40-spi.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index d614102..85ff429 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -13,6 +13,12 @@ config FPGA
>
> if FPGA
>
> +config FPGA_MGR_ICE40_SPI
> + tristate "Lattice iCE40 SPI"
> + depends on SPI
> + help
> + FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
> +
> config FPGA_MGR_SOCFPGA
> tristate "Altera SOCFPGA FPGA Manager"
> depends on ARCH_SOCFPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8d83fc6..adb5811 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -6,5 +6,6 @@
> obj-$(CONFIG_FPGA) += fpga-mgr.o
>
> # FPGA Manager Drivers
> +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
> obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
> obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
> new file mode 100644
> index 0000000..a977f19
> --- /dev/null
> +++ b/drivers/fpga/ice40-spi.c
> @@ -0,0 +1,198 @@
> +/*
> + * FPGA Manager Driver for Lattice iCE40.
> + *
> + * Copyright (c) 2016 Joel Holdsworth
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This driver adds support to the FPGA manager for configuring the SRAM of
> + * Lattice iCE40 FPGAs through slave SPI.
> + */
> +
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_gpio.h>
> +#include <linux/spi/spi.h>
Hi Joel,
It needs
#include <linux/module.h>
to be able to build.
Alan
> +
> +#define ICE40_SPI_FPGAMGR_RESET_DELAY 1 /* us (>200ns) */
> +#define ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY 1200 /* us */
> +
> +#define ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BITS 49 /* bits */
> +
> +struct ice40_fpga_priv {
> + struct spi_device *dev;
> + struct gpio_desc *reset;
> + struct gpio_desc *cdone;
> +};
> +
> +static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> +
> + return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
> + FPGA_MGR_STATE_UNKNOWN;
> +}
> +
> +static int ice40_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
> + const char *buf, size_t count)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> + struct spi_device *dev = priv->dev;
> + struct spi_message message;
> + int ret;
> +
> + if ((flags & FPGA_MGR_PARTIAL_RECONFIG)) {
> + dev_err(&dev->dev,
> + "Partial reconfiguration is not supported\n");
> + return -ENOTSUPP;
> + }
> +
> + /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
> + spi_bus_lock(dev->master);
> +
> + gpiod_set_value(priv->reset, 1);
> +
> + spi_message_init(&message);
> + spi_message_add_tail(&(struct spi_transfer){.cs_change = 1,
> + .delay_usecs = ICE40_SPI_FPGAMGR_RESET_DELAY}, &message);
> + ret = spi_sync_locked(dev, &message);
> + if (ret) {
> + spi_bus_unlock(dev->master);
> + return ret;
> + }
> +
> + /* Come out of reset */
> + gpiod_set_value(priv->reset, 0);
> +
> + /* Check CDONE is de-asserted i.e. the FPGA is reset */
> + if (gpiod_get_value(priv->cdone)) {
> + dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
> + spi_bus_unlock(dev->master);
> + return -EIO;
> + }
> +
> + /* Wait for the housekeeping to complete, and release SS_B */
> + spi_message_init(&message);
> + spi_message_add_tail(&(struct spi_transfer){
> + .delay_usecs = ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY}, &message);
> + ret = spi_sync_locked(dev, &message);
> +
> + spi_bus_unlock(dev->master);
> +
> + return ret;
> +}
> +
> +static int ice40_fpga_ops_write(struct fpga_manager *mgr,
> + const char *buf, size_t count)
> +{
> + return spi_write(((struct ice40_fpga_priv *)mgr->priv)->dev,
> + buf, count);
> +}
> +
> +static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> + struct spi_device *dev = priv->dev;
> +
> + /* Check CDONE is asserted */
> + if (!gpiod_get_value(priv->cdone)) {
> + dev_err(&dev->dev,
> + "CDONE was not asserted after firmware transfer\n");
> + return -EIO;
> + }
> +
> + /* Send of zero-padding to activate the firmware */
> + return spi_write(dev, NULL, (ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BITS +
> + dev->bits_per_word - 1) / dev->bits_per_word);
> +}
> +
> +static const struct fpga_manager_ops ice40_fpga_ops = {
> + .state = ice40_fpga_ops_state,
> + .write_init = ice40_fpga_ops_write_init,
> + .write = ice40_fpga_ops_write,
> + .write_complete = ice40_fpga_ops_write_complete,
> +};
> +
> +static int ice40_fpga_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct device_node *np = spi->dev.of_node;
> + struct ice40_fpga_priv *priv;
> + int ret;
> +
> + if (!np) {
> + dev_err(dev, "No Device Tree entry\n");
> + return -EINVAL;
> + }
> +
> + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = spi;
> +
> + /* Check board setup data. */
> + if (spi->max_speed_hz > 25000000) {
> + dev_err(dev, "Speed is too high\n");
> + return -EINVAL;
> + } else if (spi->mode & SPI_CPHA) {
> + dev_err(dev, "Bad mode\n");
> + return -EINVAL;
> + }
> +
> + /* Set up the GPIOs */
> + priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
> + if (IS_ERR(priv->cdone)) {
> + dev_err(dev, "Failed to get CDONE GPIO: %ld\n",
> + PTR_ERR(priv->cdone));
> + return ret;
> + }
> +
> + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(priv->reset)) {
> + dev_err(dev, "Failed to get CRESET_B GPIO: %ld\n",
> + PTR_ERR(priv->reset));
> + return ret;
> + }
> +
> + /* Register with the FPGA manager */
> + ret = fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
> + &ice40_fpga_ops, priv);
> + if (ret) {
> + dev_err(dev, "unable to register FPGA manager");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ice40_fpga_remove(struct spi_device *spi)
> +{
> + fpga_mgr_unregister(&spi->dev);
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id ice40_fpga_of_match[] = {
> + { .compatible = "lattice,ice40-fpga-mgr", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
> +#endif
> +
> +static struct spi_driver ice40_fpga_driver = {
> + .probe = ice40_fpga_probe,
> + .remove = ice40_fpga_remove,
> + .driver = {
> + .name = "ice40spi",
> + .of_match_table = of_match_ptr(ice40_fpga_of_match),
> + },
> +};
> +
> +module_spi_driver(ice40_fpga_driver);
> +
> +MODULE_AUTHOR("Joel Holdsworth <joel@airwebreathe.org.uk>");
> +MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread