* [PATCH] Staging: pi433: Fix the position of brace after if
@ 2017-10-07 16:57 Srishti Sharma
2017-10-07 18:05 ` [Outreachy kernel] " Julia Lawall
0 siblings, 1 reply; 2+ messages in thread
From: Srishti Sharma @ 2017-10-07 16:57 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-kernel, outreachy-kernel, Srishti Sharma
Fix the position of the brace after if when it is on the next line
or when there is no space between them. Done using the following
semantic patch by coccinelle.
@r1@
position p1, p2;
identifier x,f;
expression e;
@@
(
x=e;
|
f(...)
)
if(...)@p1 {@p2
...
}
@script: python r2@
p1 << r1.p1;
p2 << r1.p2;
@@
l1 = int (p1[0].line)
l2 = int (p2[0].line)
c1 = int (p1[0].column_end)
c2 = int (p2[0].column)
if l1 == l2 and c1+1 == c2:
cocci.include_match(False)
@r3@
position r1.p1, r1.p2;
@@
if(...
- )@p1
-{@p2
+) {
...
}
Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
---
drivers/staging/pi433/pi433_if.c | 54 ++++++++++++++--------------------------
1 file changed, 18 insertions(+), 36 deletions(-)
diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index d82c74d..d946838 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -285,8 +285,7 @@ rf69_set_tx_cfg(struct pi433_device *dev, struct pi433_tx_cfg *tx_cfg)
SET_CHECKED(rf69_set_crc_enable (dev->spi, tx_cfg->enable_crc));
/* configure sync, if enabled */
- if (tx_cfg->enable_sync == optionOn)
- {
+ if (tx_cfg->enable_sync == optionOn) {
SET_CHECKED(rf69_set_sync_size(dev->spi, tx_cfg->sync_length));
SET_CHECKED(rf69_set_sync_values(dev->spi, tx_cfg->sync_pattern));
}
@@ -408,8 +407,7 @@ pi433_receive(void *data)
if (retval) goto abort; /* wait was interrupted */
rf69_read_fifo(spi, (u8 *)&bytes_total, 1);
- if (bytes_total > dev->rx_buffer_size)
- {
+ if (bytes_total > dev->rx_buffer_size) {
retval = -1;
goto abort;
}
@@ -509,16 +507,14 @@ pi433_tx_thread(void *data)
mutex_lock(&device->tx_fifo_lock);
retval = kfifo_out(&device->tx_fifo, &tx_cfg, sizeof(tx_cfg));
- if (retval != sizeof(tx_cfg))
- {
+ if (retval != sizeof(tx_cfg)) {
dev_dbg(device->dev, "reading tx_cfg from fifo failed: got %d byte(s), expected %d", retval, (unsigned int)sizeof(tx_cfg) );
mutex_unlock(&device->tx_fifo_lock);
continue;
}
retval = kfifo_out(&device->tx_fifo, &size, sizeof(size_t));
- if (retval != sizeof(size_t))
- {
+ if (retval != sizeof(size_t)) {
dev_dbg(device->dev, "reading msg size from fifo failed: got %d, expected %d", retval, (unsigned int)sizeof(size_t) );
mutex_unlock(&device->tx_fifo_lock);
continue;
@@ -650,8 +646,7 @@ pi433_tx_thread(void *data)
SET_CHECKED(rf69_set_mode(spi, standby));
/* everything sent? */
- if ( kfifo_is_empty(&device->tx_fifo) )
- {
+ if (kfifo_is_empty(&device->tx_fifo)) {
abort:
if (rx_interrupted)
{
@@ -705,8 +700,7 @@ pi433_read(struct file *filp, char __user *buf, size_t size, loff_t *f_pos)
mutex_unlock(&device->rx_lock);
/* if read was successful copy to user space*/
- if (bytes_received > 0)
- {
+ if (bytes_received > 0) {
retval = copy_to_user(buf, device->rx_buffer, bytes_received);
if (retval)
return -EFAULT;
@@ -806,8 +800,7 @@ pi433_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
switch (cmd) {
case PI433_IOC_RD_TX_CFG:
tmp = _IOC_SIZE(cmd);
- if ( (tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0) )
- {
+ if ((tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0)) {
retval = -EINVAL;
break;
}
@@ -823,8 +816,7 @@ pi433_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
break;
case PI433_IOC_WR_TX_CFG:
tmp = _IOC_SIZE(cmd);
- if ( (tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0) )
- {
+ if ((tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0)) {
retval = -EINVAL;
break;
}
@@ -917,8 +909,7 @@ static int pi433_open(struct inode *inode, struct file *filp)
if (!device->rx_buffer) {
device->rx_buffer = kmalloc(MAX_MSG_SIZE, GFP_KERNEL);
- if (!device->rx_buffer)
- {
+ if (!device->rx_buffer) {
dev_dbg(device->dev, "open/ENOMEM\n");
return -ENOMEM;
}
@@ -926,8 +917,7 @@ static int pi433_open(struct inode *inode, struct file *filp)
device->users++;
instance = kzalloc(sizeof(*instance), GFP_KERNEL);
- if (!instance)
- {
+ if (!instance) {
kfree(device->rx_buffer);
device->rx_buffer = NULL;
return -ENOMEM;
@@ -987,8 +977,7 @@ static int setup_GPIOs(struct pi433_device *device)
snprintf(name, sizeof(name), "DIO%d", i);
device->gpiod[i] = gpiod_get(&device->spi->dev, name, 0 /*GPIOD_IN*/);
- if (device->gpiod[i] == ERR_PTR(-ENOENT))
- {
+ if (device->gpiod[i] == ERR_PTR(-ENOENT)) {
dev_dbg(&device->spi->dev, "Could not find entry for %s. Ignoring.", name);
continue;
}
@@ -1017,8 +1006,7 @@ static int setup_GPIOs(struct pi433_device *device)
/* configure irq */
device->irq_num[i] = gpiod_to_irq(device->gpiod[i]);
- if (device->irq_num[i] < 0)
- {
+ if (device->irq_num[i] < 0) {
device->gpiod[i] = ERR_PTR(-EINVAL);//(struct gpio_desc *)device->irq_num[i];
return device->irq_num[i];
}
@@ -1157,8 +1145,7 @@ static int pi433_probe(struct spi_device *spi)
/* setup GPIO (including irq_handler) for the different DIOs */
retval = setup_GPIOs(device);
- if (retval)
- {
+ if (retval) {
dev_dbg(&spi->dev, "setup of GPIOs failed");
goto GPIO_failed;
}
@@ -1176,16 +1163,14 @@ static int pi433_probe(struct spi_device *spi)
device->tx_task_struct = kthread_run(pi433_tx_thread,
device,
"pi433_tx_task");
- if (IS_ERR(device->tx_task_struct))
- {
+ if (IS_ERR(device->tx_task_struct)) {
dev_dbg(device->dev, "start of send thread failed");
goto send_thread_failed;
}
/* determ minor number */
retval = pi433_get_minor(device);
- if (retval)
- {
+ if (retval) {
dev_dbg(device->dev, "get of minor number failed");
goto minor_failed;
}
@@ -1214,8 +1199,7 @@ static int pi433_probe(struct spi_device *spi)
device->cdev->owner = THIS_MODULE;
cdev_init(device->cdev, &pi433_fops);
retval = cdev_add(device->cdev, device->devt, 1);
- if (retval)
- {
+ if (retval) {
dev_dbg(device->dev, "register of cdev failed");
goto cdev_failed;
}
@@ -1307,15 +1291,13 @@ static int __init pi433_init(void)
return status;
pi433_class = class_create(THIS_MODULE, "pi433");
- if (IS_ERR(pi433_class))
- {
+ if (IS_ERR(pi433_class)) {
unregister_chrdev(MAJOR(pi433_dev), pi433_spi_driver.driver.name);
return PTR_ERR(pi433_class);
}
status = spi_register_driver(&pi433_spi_driver);
- if (status < 0)
- {
+ if (status < 0) {
class_destroy(pi433_class);
unregister_chrdev(MAJOR(pi433_dev), pi433_spi_driver.driver.name);
}
--
2.7.4
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [Outreachy kernel] [PATCH] Staging: pi433: Fix the position of brace after if
2017-10-07 16:57 [PATCH] Staging: pi433: Fix the position of brace after if Srishti Sharma
@ 2017-10-07 18:05 ` Julia Lawall
0 siblings, 0 replies; 2+ messages in thread
From: Julia Lawall @ 2017-10-07 18:05 UTC (permalink / raw)
To: Srishti Sharma; +Cc: gregkh, devel, linux-kernel, outreachy-kernel
On Sat, 7 Oct 2017, Srishti Sharma wrote:
> Fix the position of the brace after if when it is on the next line
> or when there is no space between them. Done using the following
> semantic patch by coccinelle.
As far as I can see, in practice, you only move up { from the line below.
There is no occurrence of ){. So it would be better to say only what you
actually did, and not what you additionally intended to do.
Also, in the semantic patch, I'm not sure to see the point of the x=e; and
f(...) part of the pattern. There should never ne a newline betwee the )
and { of an if, no matter what the if follows.
julia
>
> @r1@
> position p1, p2;
> identifier x,f;
> expression e;
> @@
>
> (
> x=e;
> |
> f(...)
> )
>
> if(...)@p1 {@p2
> ...
> }
>
> @script: python r2@
> p1 << r1.p1;
> p2 << r1.p2;
> @@
>
> l1 = int (p1[0].line)
> l2 = int (p2[0].line)
> c1 = int (p1[0].column_end)
> c2 = int (p2[0].column)
>
> if l1 == l2 and c1+1 == c2:
> cocci.include_match(False)
>
> @r3@
> position r1.p1, r1.p2;
> @@
>
> if(...
> - )@p1
> -{@p2
> +) {
> ...
> }
>
> Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
> ---
> drivers/staging/pi433/pi433_if.c | 54 ++++++++++++++--------------------------
> 1 file changed, 18 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
> index d82c74d..d946838 100644
> --- a/drivers/staging/pi433/pi433_if.c
> +++ b/drivers/staging/pi433/pi433_if.c
> @@ -285,8 +285,7 @@ rf69_set_tx_cfg(struct pi433_device *dev, struct pi433_tx_cfg *tx_cfg)
> SET_CHECKED(rf69_set_crc_enable (dev->spi, tx_cfg->enable_crc));
>
> /* configure sync, if enabled */
> - if (tx_cfg->enable_sync == optionOn)
> - {
> + if (tx_cfg->enable_sync == optionOn) {
> SET_CHECKED(rf69_set_sync_size(dev->spi, tx_cfg->sync_length));
> SET_CHECKED(rf69_set_sync_values(dev->spi, tx_cfg->sync_pattern));
> }
> @@ -408,8 +407,7 @@ pi433_receive(void *data)
> if (retval) goto abort; /* wait was interrupted */
>
> rf69_read_fifo(spi, (u8 *)&bytes_total, 1);
> - if (bytes_total > dev->rx_buffer_size)
> - {
> + if (bytes_total > dev->rx_buffer_size) {
> retval = -1;
> goto abort;
> }
> @@ -509,16 +507,14 @@ pi433_tx_thread(void *data)
> mutex_lock(&device->tx_fifo_lock);
>
> retval = kfifo_out(&device->tx_fifo, &tx_cfg, sizeof(tx_cfg));
> - if (retval != sizeof(tx_cfg))
> - {
> + if (retval != sizeof(tx_cfg)) {
> dev_dbg(device->dev, "reading tx_cfg from fifo failed: got %d byte(s), expected %d", retval, (unsigned int)sizeof(tx_cfg) );
> mutex_unlock(&device->tx_fifo_lock);
> continue;
> }
>
> retval = kfifo_out(&device->tx_fifo, &size, sizeof(size_t));
> - if (retval != sizeof(size_t))
> - {
> + if (retval != sizeof(size_t)) {
> dev_dbg(device->dev, "reading msg size from fifo failed: got %d, expected %d", retval, (unsigned int)sizeof(size_t) );
> mutex_unlock(&device->tx_fifo_lock);
> continue;
> @@ -650,8 +646,7 @@ pi433_tx_thread(void *data)
> SET_CHECKED(rf69_set_mode(spi, standby));
>
> /* everything sent? */
> - if ( kfifo_is_empty(&device->tx_fifo) )
> - {
> + if (kfifo_is_empty(&device->tx_fifo)) {
> abort:
> if (rx_interrupted)
> {
> @@ -705,8 +700,7 @@ pi433_read(struct file *filp, char __user *buf, size_t size, loff_t *f_pos)
> mutex_unlock(&device->rx_lock);
>
> /* if read was successful copy to user space*/
> - if (bytes_received > 0)
> - {
> + if (bytes_received > 0) {
> retval = copy_to_user(buf, device->rx_buffer, bytes_received);
> if (retval)
> return -EFAULT;
> @@ -806,8 +800,7 @@ pi433_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> switch (cmd) {
> case PI433_IOC_RD_TX_CFG:
> tmp = _IOC_SIZE(cmd);
> - if ( (tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0) )
> - {
> + if ((tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0)) {
> retval = -EINVAL;
> break;
> }
> @@ -823,8 +816,7 @@ pi433_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> break;
> case PI433_IOC_WR_TX_CFG:
> tmp = _IOC_SIZE(cmd);
> - if ( (tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0) )
> - {
> + if ((tmp == 0) || ((tmp % sizeof(struct pi433_tx_cfg)) != 0)) {
> retval = -EINVAL;
> break;
> }
> @@ -917,8 +909,7 @@ static int pi433_open(struct inode *inode, struct file *filp)
>
> if (!device->rx_buffer) {
> device->rx_buffer = kmalloc(MAX_MSG_SIZE, GFP_KERNEL);
> - if (!device->rx_buffer)
> - {
> + if (!device->rx_buffer) {
> dev_dbg(device->dev, "open/ENOMEM\n");
> return -ENOMEM;
> }
> @@ -926,8 +917,7 @@ static int pi433_open(struct inode *inode, struct file *filp)
>
> device->users++;
> instance = kzalloc(sizeof(*instance), GFP_KERNEL);
> - if (!instance)
> - {
> + if (!instance) {
> kfree(device->rx_buffer);
> device->rx_buffer = NULL;
> return -ENOMEM;
> @@ -987,8 +977,7 @@ static int setup_GPIOs(struct pi433_device *device)
> snprintf(name, sizeof(name), "DIO%d", i);
> device->gpiod[i] = gpiod_get(&device->spi->dev, name, 0 /*GPIOD_IN*/);
>
> - if (device->gpiod[i] == ERR_PTR(-ENOENT))
> - {
> + if (device->gpiod[i] == ERR_PTR(-ENOENT)) {
> dev_dbg(&device->spi->dev, "Could not find entry for %s. Ignoring.", name);
> continue;
> }
> @@ -1017,8 +1006,7 @@ static int setup_GPIOs(struct pi433_device *device)
>
> /* configure irq */
> device->irq_num[i] = gpiod_to_irq(device->gpiod[i]);
> - if (device->irq_num[i] < 0)
> - {
> + if (device->irq_num[i] < 0) {
> device->gpiod[i] = ERR_PTR(-EINVAL);//(struct gpio_desc *)device->irq_num[i];
> return device->irq_num[i];
> }
> @@ -1157,8 +1145,7 @@ static int pi433_probe(struct spi_device *spi)
>
> /* setup GPIO (including irq_handler) for the different DIOs */
> retval = setup_GPIOs(device);
> - if (retval)
> - {
> + if (retval) {
> dev_dbg(&spi->dev, "setup of GPIOs failed");
> goto GPIO_failed;
> }
> @@ -1176,16 +1163,14 @@ static int pi433_probe(struct spi_device *spi)
> device->tx_task_struct = kthread_run(pi433_tx_thread,
> device,
> "pi433_tx_task");
> - if (IS_ERR(device->tx_task_struct))
> - {
> + if (IS_ERR(device->tx_task_struct)) {
> dev_dbg(device->dev, "start of send thread failed");
> goto send_thread_failed;
> }
>
> /* determ minor number */
> retval = pi433_get_minor(device);
> - if (retval)
> - {
> + if (retval) {
> dev_dbg(device->dev, "get of minor number failed");
> goto minor_failed;
> }
> @@ -1214,8 +1199,7 @@ static int pi433_probe(struct spi_device *spi)
> device->cdev->owner = THIS_MODULE;
> cdev_init(device->cdev, &pi433_fops);
> retval = cdev_add(device->cdev, device->devt, 1);
> - if (retval)
> - {
> + if (retval) {
> dev_dbg(device->dev, "register of cdev failed");
> goto cdev_failed;
> }
> @@ -1307,15 +1291,13 @@ static int __init pi433_init(void)
> return status;
>
> pi433_class = class_create(THIS_MODULE, "pi433");
> - if (IS_ERR(pi433_class))
> - {
> + if (IS_ERR(pi433_class)) {
> unregister_chrdev(MAJOR(pi433_dev), pi433_spi_driver.driver.name);
> return PTR_ERR(pi433_class);
> }
>
> status = spi_register_driver(&pi433_spi_driver);
> - if (status < 0)
> - {
> + if (status < 0) {
> class_destroy(pi433_class);
> unregister_chrdev(MAJOR(pi433_dev), pi433_spi_driver.driver.name);
> }
> --
> 2.7.4
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1507395478-4416-1-git-send-email-srishtishar%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-07 18:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-07 16:57 [PATCH] Staging: pi433: Fix the position of brace after if Srishti Sharma
2017-10-07 18:05 ` [Outreachy kernel] " Julia Lawall
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®