From: Linus Torvalds <torvalds@linux-foundation.org>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
Alan Stern <stern@rowland.harvard.edu>,
Andrew Morton <akpm@linux-foundation.org>,
Zdenek Kabelac <zdenek.kabelac@gmail.com>,
davem@davemloft.net, Pierre Ossman <drzeus-mmc@drzeus.cx>,
Kernel development list <linux-kernel@vger.kernel.org>,
pm list <linux-pm@lists.linux-foundation.org>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: Re: [patch] Re: using long instead of atomic_t when only set/read is required
Date: Mon, 3 Mar 2008 14:23:40 -0800 (PST) [thread overview]
Message-ID: <alpine.LFD.1.00.0803031422180.2979@woody.linux-foundation.org> (raw)
In-Reply-To: <200803032127.30761.rjw@sisk.pl>
On Mon, 3 Mar 2008, Rafael J. Wysocki wrote:
>
> Well something like this could happen, in theory, on a "32-bit" architecture
> with a 16-bit bus.
No it couldn't.
That would only be true if there is no cache, and no cache coherency.
Basically, Linux requires a cache-coherent architecture to work in SMP.
Anything else is insane (except as a cluster).
So there is no way we can see partial updates, except with terminally
broken hardware that we would never support anyway for tons of other
reasons.
Linus
next prev parent reply other threads:[~2008-03-03 22:24 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20080219232338.E9A24108068@picon.linux-foundation.org>
2008-02-20 16:42 ` [Bug 10030] Suspend doesn't work when SD card is inserted Alan Stern
2008-02-20 17:30 ` Pierre Ossman
2008-02-20 19:26 ` Alan Stern
2008-02-20 20:51 ` Pierre Ossman
2008-02-20 20:58 ` Rafael J. Wysocki
2008-02-20 21:06 ` Alan Stern
2008-02-20 22:15 ` Rafael J. Wysocki
2008-02-20 22:24 ` Alan Stern
2008-02-20 22:41 ` Rafael J. Wysocki
2008-02-21 0:02 ` Rafael J. Wysocki
2008-02-21 16:27 ` Alan Stern
2008-02-21 16:38 ` Rafael J. Wysocki
2008-02-21 17:48 ` Alan Stern
2008-02-21 22:47 ` Rafael J. Wysocki
2008-02-21 23:05 ` Alan Stern
2008-02-23 1:30 ` Rafael J. Wysocki
2008-02-23 4:39 ` Alan Stern
2008-02-23 20:16 ` Rafael J. Wysocki
2008-02-23 23:29 ` Alan Stern
2008-02-24 0:19 ` Rafael J. Wysocki
2008-02-24 3:25 ` Alan Stern
2008-02-24 4:26 ` [linux-pm] " Alan Stern
2008-02-24 14:00 ` Rafael J. Wysocki
2008-02-24 15:33 ` Bugs in MMC [was: [Bug 10030] Suspend doesn't work when SD card is inserted] Alan Stern
2008-02-25 17:41 ` Pierre Ossman
2008-02-25 17:58 ` Alan Stern
2008-02-25 18:31 ` Pierre Ossman
2008-02-25 20:00 ` Alan Stern
2008-03-01 14:11 ` Pierre Ossman
2008-03-01 14:36 ` Alan Stern
2008-03-01 14:47 ` Pierre Ossman
2008-02-25 22:51 ` Felipe Balbi
2008-03-03 21:59 ` David Brownell
2008-03-04 6:03 ` Pierre Ossman
2008-03-04 9:44 ` David Brownell
2008-03-04 9:58 ` Pierre Ossman
2008-03-06 21:23 ` David Brownell
2008-03-04 17:53 ` Alan Stern
2008-03-04 18:53 ` David Brownell
2008-03-04 19:51 ` Alan Stern
2008-03-04 20:30 ` David Brownell
2008-03-04 21:00 ` Alan Stern
2008-03-06 15:55 ` Pavel Machek
2008-03-06 20:33 ` Alan Stern
2008-03-06 20:53 ` Zdenek Kabelac
2008-03-06 21:31 ` Rafael J. Wysocki
2008-03-04 17:50 ` Alan Stern
2008-02-24 13:33 ` [Bug 10030] Suspend doesn't work when SD card is inserted Rafael J. Wysocki
2008-02-24 20:25 ` Rafael J. Wysocki
2008-02-24 20:45 ` Alan Stern
2008-02-24 20:56 ` Rafael J. Wysocki
2008-02-24 21:11 ` Alan Stern
2008-02-24 22:18 ` Rafael J. Wysocki
2008-02-24 13:51 ` Rafael J. Wysocki
2008-02-24 19:27 ` Alan Stern
2008-02-24 19:42 ` Zdenek Kabelac
2008-02-24 20:09 ` Rafael J. Wysocki
2008-02-24 18:21 ` Pavel Machek
2008-02-24 19:03 ` Alan Stern
2008-02-24 20:11 ` Pavel Machek
2008-02-24 20:33 ` Alan Stern
2008-02-24 21:42 ` Pavel Machek
2008-02-24 22:21 ` Rafael J. Wysocki
2008-02-25 2:21 ` Alan Stern
2008-02-25 11:41 ` Rafael J. Wysocki
[not found] ` <c4e36d110802250402q7312a488idf752e07db7504e8@mail.gmail.com>
2008-02-25 12:31 ` Rafael J. Wysocki
2008-02-25 2:19 ` Alan Stern
2008-02-25 9:03 ` using long instead of atomic_t when only set/read is required (was Re: [Bug 10030] Suspend doesn't work when SD card is inserted) Pavel Machek
2008-02-25 14:46 ` Alan Stern
2008-03-03 12:08 ` [patch] Re: using long instead of atomic_t when only set/read is required Pavel Machek
2008-03-03 15:42 ` Alan Stern
2008-03-03 15:53 ` Alan Cox
2008-03-03 17:11 ` Alan Stern
2008-03-03 17:26 ` Linus Torvalds
2008-03-03 17:44 ` Pavel Machek
2008-03-03 19:27 ` Alan Stern
2008-03-06 15:58 ` Mark Lord
2008-03-06 16:11 ` Linus Torvalds
2008-03-06 16:27 ` Mark Lord
2008-03-03 17:16 ` Nick Piggin
2008-03-03 17:31 ` Paul E. McKenney
2008-03-03 17:33 ` Alan Cox
2008-03-03 17:22 ` Paul E. McKenney
2008-03-03 15:48 ` Alan Cox
2008-03-03 17:24 ` Pavel Machek
2008-03-03 20:27 ` Rafael J. Wysocki
2008-03-03 21:12 ` Paul E. McKenney
2008-03-03 22:23 ` Linus Torvalds [this message]
2008-03-04 23:32 ` Peter Hartley
2008-03-04 23:54 ` Rafael J. Wysocki
2008-03-05 0:26 ` Paul E. McKenney
2008-02-25 11:40 ` [Bug 10030] Suspend doesn't work when SD card is inserted Rafael J. Wysocki
2008-03-05 17:07 [patch] Re: using long instead of atomic_t when only set/read is required Matti Linnanvuori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.1.00.0803031422180.2979@woody.linux-foundation.org \
--to=torvalds@linux-foundation.org \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=davem@davemloft.net \
--cc=drzeus-mmc@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=pavel@ucw.cz \
--cc=rjw@sisk.pl \
--cc=stern@rowland.harvard.edu \
--cc=zdenek.kabelac@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®