From: Thomas Gleixner <tglx@linutronix.de>
To: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>,
Fenghua Yu <fenghua.yu@intel.com>, Ingo Molnar <mingo@elte.hu>,
H Peter Anvin <hpa@zytor.com>,
Suresh B Siddha <suresh.b.siddha@intel.com>,
Tony Luck <tony.luck@intel.com>,
Asit K Mallick <asit.k.mallick@intel.com>,
Arjan Dan De Ven <arjan@linux.intel.com>,
linux-kernel <linux-kernel@vger.kernel.org>, x86 <x86@kernel.org>,
linux-pm <linux-pm@vger.kernel.org>,
"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Subject: [PATCH] kthread: Implement park/unpark facility
Date: Tue, 5 Jun 2012 15:41:48 +0200 (CEST) [thread overview]
Message-ID: <alpine.LFD.2.02.1206051538280.3086@ionos> (raw)
In-Reply-To: <alpine.LFD.2.02.1206051135260.3086@ionos>
Subject: kthread: Implement park/unpark facility
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 18 Apr 2012 16:37:40 +0200
To avoid the full teardown/setup of per cpu kthreads in the case of
cpu hot(un)plug, provide a facility which allows to put the kthread
into a park position and unpark it when the cpu comes online again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
include/linux/kthread.h | 10 ++
kernel/kthread.c | 161 +++++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 160 insertions(+), 11 deletions(-)
Index: tip/include/linux/kthread.h
===================================================================
--- tip.orig/include/linux/kthread.h
+++ tip/include/linux/kthread.h
@@ -14,6 +14,11 @@ struct task_struct *kthread_create_on_no
kthread_create_on_node(threadfn, data, -1, namefmt, ##arg)
+struct task_struct *kthread_create_on_cpu(int (*threadfn)(void *data),
+ void *data,
+ unsigned int cpu,
+ const char *namefmt);
+
/**
* kthread_run - create and wake a thread.
* @threadfn: the function to run until signal_pending(current).
@@ -34,9 +39,12 @@ struct task_struct *kthread_create_on_no
void kthread_bind(struct task_struct *k, unsigned int cpu);
int kthread_stop(struct task_struct *k);
-int kthread_should_stop(void);
+bool kthread_should_stop(void);
+bool kthread_should_park(void);
bool kthread_freezable_should_stop(bool *was_frozen);
void *kthread_data(struct task_struct *k);
+int kthread_park(struct task_struct *k);
+void kthread_unpark(struct task_struct *k);
int kthreadd(void *unused);
extern struct task_struct *kthreadd_task;
Index: tip/kernel/kthread.c
===================================================================
--- tip.orig/kernel/kthread.c
+++ tip/kernel/kthread.c
@@ -37,8 +37,13 @@ struct kthread_create_info
};
struct kthread {
- int should_stop;
+ bool should_stop;
+ bool should_park;
+ bool is_parked;
+ bool is_percpu;
+ unsigned int cpu;
void *data;
+ struct completion parked;
struct completion exited;
};
@@ -52,13 +57,29 @@ struct kthread {
* and this will return true. You should then return, and your return
* value will be passed through to kthread_stop().
*/
-int kthread_should_stop(void)
+bool kthread_should_stop(void)
{
return to_kthread(current)->should_stop;
}
EXPORT_SYMBOL(kthread_should_stop);
/**
+ * kthread_should_park - should this kthread return now?
+ *
+ * When someone calls kthread_park() on your kthread, it will be woken
+ * and this will return true. You should then return, and your return
+ * value will be passed through to kthread_park().
+ *
+ * Similar to kthread_should_stop(), but this keeps the thread alive
+ * and in a park position. kthread_unpark() "restart" the thread and
+ * calls the thread function again.
+ */
+bool kthread_should_park(void)
+{
+ return to_kthread(current)->should_park;
+}
+
+/**
* kthread_freezable_should_stop - should this freezable kthread return now?
* @was_frozen: optional out parameter, indicates whether %current was frozen
*
@@ -96,6 +117,23 @@ void *kthread_data(struct task_struct *t
return to_kthread(task)->data;
}
+static bool kthread_parking(struct kthread *self)
+{
+ bool ret = false;
+
+ __set_current_state(TASK_INTERRUPTIBLE);
+ if (self->should_park) {
+ ret = true;
+ if (!self->is_parked) {
+ self->is_parked = true;
+ complete(&self->parked);
+ }
+ schedule();
+ }
+ __set_current_state(TASK_RUNNING);
+ return ret;
+}
+
static int kthread(void *_create)
{
/* Copy data: it's on kthread's stack */
@@ -105,9 +143,12 @@ static int kthread(void *_create)
struct kthread self;
int ret;
- self.should_stop = 0;
+ self.should_stop = false;
+ self.should_park = false;
+ self.is_parked = false;
self.data = data;
init_completion(&self.exited);
+ init_completion(&self.parked);
current->vfork_done = &self.exited;
/* OK, tell user we're spawned, wait for stop or wakeup */
@@ -117,9 +158,15 @@ static int kthread(void *_create)
schedule();
ret = -EINTR;
- if (!self.should_stop)
- ret = threadfn(data);
+ while (!self.should_stop) {
+ if (kthread_parking(&self))
+ continue;
+ self.is_parked = false;
+ ret = threadfn(data);
+ if (!self.should_park)
+ break;
+ }
/* we can't just return, we must preserve "self" on stack */
do_exit(ret);
}
@@ -210,6 +257,13 @@ struct task_struct *kthread_create_on_no
}
EXPORT_SYMBOL(kthread_create_on_node);
+static void __kthread_bind(struct task_struct *p, unsigned int cpu)
+{
+ /* It's safe because the task is inactive. */
+ do_set_cpus_allowed(p, cpumask_of(cpu));
+ p->flags |= PF_THREAD_BOUND;
+}
+
/**
* kthread_bind - bind a just-created kthread to a cpu.
* @p: thread created by kthread_create().
@@ -226,14 +280,101 @@ void kthread_bind(struct task_struct *p,
WARN_ON(1);
return;
}
-
- /* It's safe because the task is inactive. */
- do_set_cpus_allowed(p, cpumask_of(cpu));
- p->flags |= PF_THREAD_BOUND;
+ __kthread_bind(p, cpu);
}
EXPORT_SYMBOL(kthread_bind);
/**
+ * kthread_create_on_cpu - Create a cpu bound kthread
+ * @threadfn: the function to run until signal_pending(current).
+ * @data: data ptr for @threadfn.
+ * @node: memory node number.
+ * @namefmt: printf-style name for the thread.
+ *
+ * Description: This helper function creates and names a kernel thread
+ * and binds it to a given CPU. The thread will be woken and put into
+ * park mode.
+ */
+struct task_struct *kthread_create_on_cpu(int (*threadfn)(void *data),
+ void *data,
+ unsigned int cpu,
+ const char *namefmt)
+{
+ struct task_struct *p;
+
+ p = kthread_create_on_node(threadfn, data, cpu_to_node(cpu), namefmt,
+ cpu);
+ if (IS_ERR(p))
+ return p;
+ /* Park the thread, mark it percpu and then bind it */
+ kthread_park(p);
+ to_kthread(p)->is_percpu = true;
+ to_kthread(p)->cpu = cpu;
+ __kthread_bind(p, cpu);
+ return p;
+}
+
+/**
+ * kthread_unpark - unpark a thread created by kthread_create().
+ * @k: thread created by kthread_create().
+ *
+ * Sets kthread_should_park() for @k to return false, wakes it, and
+ * waits for it to return. If the thread is marked percpu then its
+ * bound to the cpu again.
+ */
+void kthread_unpark(struct task_struct *k)
+{
+ struct kthread *kthread;
+
+ get_task_struct(k);
+
+ kthread = to_kthread(k);
+ barrier(); /* it might have exited */
+ if (k->vfork_done != NULL && kthread->is_parked) {
+ if (kthread->is_percpu)
+ __kthread_bind(k, kthread->cpu);
+ kthread->should_park = false;
+ wake_up_process(k);
+ }
+ put_task_struct(k);
+}
+
+/**
+ * kthread_park - park a thread created by kthread_create().
+ * @k: thread created by kthread_create().
+ *
+ * Sets kthread_should_park() for @k to return true, wakes it, and
+ * waits for it to return. This can also be called after kthread_create()
+ * instead of calling wake_up_process(): the thread will park without
+ * calling threadfn().
+ *
+ * Returns 0 if the thread is parked, -ENOSYS if the thread exited.
+ * If called by the kthread itself just the park bit is set.
+ */
+int kthread_park(struct task_struct *k)
+{
+ struct kthread *kthread;
+ int ret = -ENOSYS;
+
+ get_task_struct(k);
+
+ kthread = to_kthread(k);
+ barrier(); /* it might have exited */
+ if (k->vfork_done != NULL) {
+ if (!kthread->is_parked) {
+ kthread->should_park = true;
+ if (k != current) {
+ wake_up_process(k);
+ wait_for_completion(&kthread->parked);
+ }
+ }
+ ret = 0;
+ }
+ put_task_struct(k);
+ return ret;
+}
+
+/**
* kthread_stop - stop a thread created by kthread_create().
* @k: thread created by kthread_create().
*
@@ -259,7 +400,7 @@ int kthread_stop(struct task_struct *k)
kthread = to_kthread(k);
barrier(); /* it might have exited */
if (k->vfork_done != NULL) {
- kthread->should_stop = 1;
+ kthread->should_stop = true;
wake_up_process(k);
wait_for_completion(&kthread->exited);
}
next prev parent reply other threads:[~2012-06-05 13:42 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-04 18:17 [PATCH 0/6] x86/cpu hotplug: Wake up offline CPU via mwait or nmi Fenghua Yu
2012-06-04 18:17 ` [PATCH 1/6] x86/Documentation/kernel-parameters.txt: Add wakeup_cpu_via_init kernel parameter help Fenghua Yu
2012-06-04 18:17 ` [PATCH 2/6] x86/head_32.S/head_64.S: Kernel entry code after waking up offline CPU via mwait or nmi Fenghua Yu
2012-06-04 18:17 ` [PATCH 3/6] x86/smpboot.c: Wake " Fenghua Yu
2012-06-04 18:58 ` Suresh Siddha
2012-06-04 19:35 ` Yu, Fenghua
2012-06-04 18:17 ` [PATCH 4/6] x86/apic_flat_64.c: Wakeup function in apic calls mwait or nmi method Fenghua Yu
2012-06-04 18:17 ` [PATCH 5/6] x86/x2apic_cluster.c: Wakeup function in x2apic_cluster " Fenghua Yu
2012-06-04 18:17 ` [PATCH 6/6] x86/x2apic_phys.c: Wakeup function in x2apic_phys " Fenghua Yu
2012-06-04 18:17 ` Fenghua Yu
2012-06-04 20:11 ` [PATCH 0/6] x86/cpu hotplug: Wake up offline CPU via mwait or nmi Thomas Gleixner
2012-06-04 20:18 ` Luck, Tony
2012-06-04 22:52 ` Thomas Gleixner
2012-06-04 20:33 ` Peter Zijlstra
2012-06-05 0:40 ` Rusty Russell
2012-06-05 1:23 ` Arjan van de Ven
2012-06-05 7:38 ` Peter Zijlstra
2012-06-05 14:17 ` Alan Stern
2012-06-05 15:27 ` Arjan van de Ven
2012-06-05 7:39 ` Peter Zijlstra
2012-06-05 16:02 ` Yu, Fenghua
2012-06-05 16:09 ` Peter Zijlstra
2012-06-05 16:18 ` Yu, Fenghua
2012-06-05 16:19 ` Peter Zijlstra
2012-06-05 17:44 ` Luck, Tony
2012-06-05 17:50 ` Peter Zijlstra
2012-06-05 19:43 ` Thomas Gleixner
2012-06-05 19:45 ` Peter Zijlstra
2012-06-05 19:49 ` Peter Zijlstra
2012-06-05 19:51 ` Arjan van de Ven
2012-06-05 19:52 ` Peter Zijlstra
2012-06-05 20:47 ` Thomas Gleixner
2012-06-05 21:30 ` Peter Zijlstra
2012-06-05 22:09 ` Thomas Gleixner
2012-06-06 8:23 ` Peter Zijlstra
2012-06-06 8:30 ` Peter Zijlstra
2012-06-06 8:40 ` Peter Zijlstra
2012-06-05 22:12 ` Paul E. McKenney
2012-06-06 8:40 ` Peter Zijlstra
2012-06-06 8:42 ` Peter Zijlstra
2012-06-06 14:44 ` Paul E. McKenney
2012-06-06 15:46 ` Peter Zijlstra
2012-06-06 23:20 ` Paul E. McKenney
2012-06-08 9:20 ` Peter Zijlstra
2012-06-06 8:43 ` Peter Zijlstra
2012-06-06 14:41 ` Paul E. McKenney
2012-06-06 15:23 ` Arjan van de Ven
2012-06-06 15:48 ` Peter Zijlstra
2012-06-06 15:49 ` Paul E. McKenney
2012-06-06 16:59 ` Arjan van de Ven
2012-06-05 21:29 ` Paul E. McKenney
2012-06-05 21:37 ` Peter Zijlstra
2012-06-05 22:00 ` Paul E. McKenney
2012-06-06 12:17 ` Peter Zijlstra
2012-06-06 14:43 ` Paul E. McKenney
2012-06-05 19:51 ` Peter Zijlstra
2012-06-05 20:58 ` Andi Kleen
2012-06-05 21:15 ` Thomas Gleixner
2012-06-05 21:33 ` Thomas Gleixner
2012-06-05 23:13 ` Andi Kleen
2012-06-06 1:52 ` Arjan van de Ven
2012-06-05 18:07 ` Peter Zijlstra
2012-06-05 19:54 ` Luck, Tony
2012-06-05 19:56 ` Peter Zijlstra
2012-06-05 9:36 ` Thomas Gleixner
2012-06-05 13:41 ` Thomas Gleixner [this message]
2012-06-05 14:01 ` [PATCH] kthread: Implement park/unpark facility Peter Zijlstra
2012-06-05 14:05 ` Peter Zijlstra
2012-06-07 0:04 ` H. Peter Anvin
2012-06-10 5:40 ` Rusty Russell
2012-06-11 9:26 ` Thomas Gleixner
2012-06-12 0:23 ` Rusty Russell
2012-06-05 15:35 ` [PATCH 0/6] x86/cpu hotplug: Wake up offline CPU via mwait or nmi Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.02.1206051538280.3086@ionos \
--to=tglx@linutronix.de \
--cc=arjan@linux.intel.com \
--cc=asit.k.mallick@intel.com \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=rusty@rustcorp.com.au \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=suresh.b.siddha@intel.com \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome