sungem lockup on 2.6.26.2 on sparc64

sungem lockup on 2.6.26.2 on sparc64

[Aaron Sethman]

Got this on 2.6.26.2 on sparc64

eth1: Pause is disabled
BUG: soft lockup - CPU#0 stuck for 61s! [ifconfig:1297]
TSTATE: 0000000080009600 TPC: 00000000005ed080 TNPC: 00000000005ed084 Y: 
00000000    Not tainted
g0: 0000000000000000 g1: fffff80047beef90 g2: fffff80047beef90 g3: 
fffff80065670560
g4: fffff80066193060 g5: 0000006574683100 g6: fffff80047bec000 g7: 
00000000007db630
o0: fffff80065670000 o1: fffff80047bec400 o2: 0000000000460f24 o3: 
0000000000000100
o4: fffff80066096000 o5: fffff80066096000 sp: fffff80047bee6e1 ret_pc: 
00000000004610b4
l0: 00000000007da780 l1: 0000000000000100 l2: fffff80047beef90 l3: 
00000000005ed080
l4: 0000000000715758 l5: 00000000007db790 l6: 00000000007dbb90 l7: 
ff2002ffff2002ff
i0: 00000000007da320 i1: fffff80066096650 i2: 0000000000000001 i3: 
0000000000000000
i4: 00000000007dc390 i5: 00000000007dbf90 i6: fffff80047bee7b1 i7: 
000000000045bf10


The output of ksymoops on this is as follows:

Reading Oops report from the terminal
TSTATE: 0000000080009600 TPC: 00000000005ed080 TNPC: 00000000005ed084 Y: 
00000000    Not tainted
Using defaults from ksymoops -a sparc
g0: 0000000000000000 g1: fffff80047beef90 g2: fffff80047beef90 g3: 
fffff80065670560
g4: fffff80066193060 g5: 0000006574683100 g6: fffff80047bec000 g7: 
00000000007db630
o0: fffff80065670000 o1: fffff80047bec400 o2: 0000000000460f24 o3: 
0000000000000100
o4: fffff80066096000 o5: fffff80066096000 sp: fffff80047bee6e1 ret_pc: 
00000000004610b4
l0: 00000000007da780 l1: 0000000000000100 l2: fffff80047beef90 l3: 
00000000005ed080
l4: 0000000000715758 l5: 00000000007db790 l6: 00000000007dbb90 l7: 
ff2002ffff2002ff
i0: 00000000007da320 i1: fffff80066096650 i2: 0000000000000001 i3: 
0000000000000000
i4: 00000000007dc390 i5: 00000000007dbf90 i6: fffff80047bee7b1 i7: 
000000000045bf10


>>TPC; 005ed080 <sym53c8xx_timer+0/40>   <=====

>>g7; 007db630 <boot_tvec_bases+eb0/2040>
>>o2; 00460f24 <run_timer_softirq+4/200>
>>ret_pc; 004610b4 <run_timer_softirq+194/200>
>>l0; 007da780 <boot_tvec_bases+0/2040>
>>l3; 005ed080 <sym53c8xx_timer+0/40>
>>l4; 00715758 <jiffies+0/0>
>>l5; 007db790 <boot_tvec_bases+1010/2040>
>>l6; 007dbb90 <boot_tvec_bases+1410/2040>
>>i0; 007da320 <softirq_vec+10/200>
>>i4; 007dc390 <boot_tvec_bases+1c10/2040>
>>i5; 007dbf90 <boot_tvec_bases+1810/2040>
>>i7; 0045bf10 <__do_softirq+70/100>


Any ideas or clues?

-Aaron

Re: sungem lockup on 2.6.26.2 on sparc64

[Alexander Clouter]

Aaron Sethman <androsyn@ratbox.org> wrote:
>
> Got this on 2.6.26.2 on sparc64
>
I got it on a 2.6.24 (going up from 2.6.18ish) :-/  I also too get it
on a 2.6.26 kernel.
 
> eth1: Pause is disabled
> BUG: soft lockup - CPU#0 stuck for 61s! [ifconfig:1297]
> TSTATE: 0000000080009600 TPC: 00000000005ed080 TNPC: 00000000005ed084 Y: 
> 00000000    Not tainted
> g0: 0000000000000000 g1: fffff80047beef90 g2: fffff80047beef90 g3: 
> fffff80065670560
> g4: fffff80066193060 g5: 0000006574683100 g6: fffff80047bec000 g7: 
> 00000000007db630
> o0: fffff80065670000 o1: fffff80047bec400 o2: 0000000000460f24 o3: 
> 0000000000000100
> o4: fffff80066096000 o5: fffff80066096000 sp: fffff80047bee6e1 ret_pc: 
> 00000000004610b4
> l0: 00000000007da780 l1: 0000000000000100 l2: fffff80047beef90 l3: 
> 00000000005ed080
> l4: 0000000000715758 l5: 00000000007db790 l6: 00000000007dbb90 l7: 
> ff2002ffff2002ff
> i0: 00000000007da320 i1: fffff80066096650 i2: 0000000000000001 i3: 
> 0000000000000000
> i4: 00000000007dc390 i5: 00000000007dbf90 i6: fffff80047bee7b1 i7: 
> 000000000045bf10
> 
> 
> The output of ksymoops on this is as follows:
> 
> Reading Oops report from the terminal
> TSTATE: 0000000080009600 TPC: 00000000005ed080 TNPC: 00000000005ed084 Y: 
> 00000000    Not tainted
> Using defaults from ksymoops -a sparc
> g0: 0000000000000000 g1: fffff80047beef90 g2: fffff80047beef90 g3: 
> fffff80065670560
> g4: fffff80066193060 g5: 0000006574683100 g6: fffff80047bec000 g7: 
> 00000000007db630
> o0: fffff80065670000 o1: fffff80047bec400 o2: 0000000000460f24 o3: 
> 0000000000000100
> o4: fffff80066096000 o5: fffff80066096000 sp: fffff80047bee6e1 ret_pc: 
> 00000000004610b4
> l0: 00000000007da780 l1: 0000000000000100 l2: fffff80047beef90 l3: 
> 00000000005ed080
> l4: 0000000000715758 l5: 00000000007db790 l6: 00000000007dbb90 l7: 
> ff2002ffff2002ff
> i0: 00000000007da320 i1: fffff80066096650 i2: 0000000000000001 i3: 
> 0000000000000000
> i4: 00000000007dc390 i5: 00000000007dbf90 i6: fffff80047bee7b1 i7: 
> 000000000045bf10
> 
> 
>>>TPC; 005ed080 <sym53c8xx_timer+0/40>   <=====
> 
>>>g7; 007db630 <boot_tvec_bases+eb0/2040>
>>>o2; 00460f24 <run_timer_softirq+4/200>
>>>ret_pc; 004610b4 <run_timer_softirq+194/200>
>>>l0; 007da780 <boot_tvec_bases+0/2040>
>>>l3; 005ed080 <sym53c8xx_timer+0/40>
>>>l4; 00715758 <jiffies+0/0>
>>>l5; 007db790 <boot_tvec_bases+1010/2040>
>>>l6; 007dbb90 <boot_tvec_bases+1410/2040>
>>>i0; 007da320 <softirq_vec+10/200>
>>>i4; 007dc390 <boot_tvec_bases+1c10/2040>
>>>i5; 007dbf90 <boot_tvec_bases+1810/2040>
>>>i7; 0045bf10 <__do_softirq+70/100>
> 
Yeah, exactly the same for me, it cares not about PREEMPT either (the
only testing I did do).

> Any ideas or clues?
>
I found its the autoneg bit and kept meaning to track down the bug.
Alas the Netra I have powered on is 'production' and the users
complain when I reboot regularly and the spare one I have is under my
desk and needs some love and attention.

The workaround I have is just before you configure your NIC's
(assuming you only use eth0) to put in your network startup scripts:

====
ethtool -s eth0 autoneg off
ethtool -s eth1 autoneg off
ethtool -s eth0 autoneg on
====

So for debian, prepend 'pre-up' before those lines.

I apologise to the maintainer of the driver for being lazy :-/

Cheers

Alex