[PATCH v4 1/2] ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ

[PATCH v4 1/2] ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ

[clarke.li]

From: Hongnan Li <clarke.li@hj-micro.com>

Use HZ_PER_MHZ multiplier for fixed_clk_rate values to
improve readability.

Signed-off-by: Hongnan Li <clarke.li@hj-micro.com>
---
 drivers/acpi/acpi_apd.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 008bd0552cb7..275027ebd01f 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/clk-fch.h>
 #include <linux/platform_device.h>
+#include <linux/units.h>
 
 #include "internal.h"
 
@@ -110,17 +111,17 @@ static int fch_misc_setup(struct apd_private_data *pdata)
 
 static const struct apd_device_desc cz_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 133000000,
+	.fixed_clk_rate = 133 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc wt_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 150000000,
+	.fixed_clk_rate = 150 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc wt_i3c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 125000000,
+	.fixed_clk_rate = 125 * HZ_PER_MHZ,
 };
 
 static struct property_entry uart_properties[] = {
@@ -132,7 +133,7 @@ static struct property_entry uart_properties[] = {
 
 static const struct apd_device_desc cz_uart_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 48000000,
+	.fixed_clk_rate = 48 * HZ_PER_MHZ,
 	.properties = uart_properties,
 };
 
@@ -144,52 +145,52 @@ static const struct apd_device_desc fch_misc_desc = {
 #ifdef CONFIG_ARM64
 static const struct apd_device_desc xgene_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 100000000,
+	.fixed_clk_rate = 100 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc vulcan_spi_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 133000000,
+	.fixed_clk_rate = 133 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc hip07_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 200000000,
+	.fixed_clk_rate = 200 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc hip08_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 250000000,
+	.fixed_clk_rate = 250 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc hip08_lite_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 125000000,
+	.fixed_clk_rate = 125 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc thunderx2_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 125000000,
+	.fixed_clk_rate = 125 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc nxp_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 350000000,
+	.fixed_clk_rate = 350 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc hip08_spi_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 250000000,
+	.fixed_clk_rate = 250 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc leca_spi_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 400000000,
+	.fixed_clk_rate = 400 * HZ_PER_MHZ,
 };
 
 static const struct apd_device_desc leca_i2c_desc = {
 	.setup = acpi_apd_setup,
-	.fixed_clk_rate = 250000000,
+	.fixed_clk_rate = 250 * HZ_PER_MHZ,
 };
 
 #endif /* CONFIG_ARM64 */
-- 
2.55.0

[PATCH v4 2/2] ACPI: APD: Add clock frequency for HJMC01 I2C controller

[clarke.li]

From: Xiangyang Yu <hunter.yu@hj-micro.com>

I2C clock frequency for HJMC01 is 200MHz, define a new ACPI
HID for it.

Signed-off-by: Xiangyang Yu <hunter.yu@hj-micro.com>
Signed-off-by: Hongnan Li <clarke.li@hj-micro.com>
---
 drivers/acpi/acpi_apd.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 275027ebd01f..e7366fcb76ee 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -193,6 +193,11 @@ static const struct apd_device_desc leca_i2c_desc = {
 	.fixed_clk_rate = 250 * HZ_PER_MHZ,
 };
 
+static const struct apd_device_desc hjmc_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 200 * HZ_PER_MHZ,
+};
+
 #endif /* CONFIG_ARM64 */
 
 #endif
@@ -263,6 +268,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
 	{ "HISI02A3", APD_ADDR(hip08_lite_i2c_desc) },
 	{ "HISI0173", APD_ADDR(hip08_spi_desc) },
+	{ "HJMC3001", APD_ADDR(hjmc_i2c_desc) },
 	{ "LECA0002", APD_ADDR(leca_spi_desc) },
 	{ "LECA0003", APD_ADDR(leca_i2c_desc) },
 	{ "NXP0001", APD_ADDR(nxp_i2c_desc) },
-- 
2.55.0

Re: [PATCH v4 2/2] ACPI: APD: Add clock frequency for HJMC01 I2C controller

[Andy Shevchenko]

On Thu, Aug 13, 2026 at 02:40:25PM +0800, clarke.li wrote:

> I2C clock frequency for HJMC01 is 200MHz, define a new ACPI
> HID for it.

LGTM now,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

...

> +	{ "HJMC3001", APD_ADDR(hjmc_i2c_desc) },

Vendor is in the official registry and ID is real, thanks for that!

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 1/2] ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ

[Andy Shevchenko]

On Thu, Aug 13, 2026 at 02:30:04PM +0800, clarke.li wrote:

> Use HZ_PER_MHZ multiplier for fixed_clk_rate values to
> improve readability.

And actually increases robustness of the code as there is less chances
to miss a 0 or have an extra one.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 1/2] ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ

[Rafael J. Wysocki (Intel)]

On Thu, Aug 13, 2026 at 9:35 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Thu, Aug 13, 2026 at 02:30:04PM +0800, clarke.li wrote:
>
> > Use HZ_PER_MHZ multiplier for fixed_clk_rate values to
> > improve readability.
>
> And actually increases robustness of the code as there is less chances
> to miss a 0 or have an extra one.
>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Applied along with the [2/2] as 7.3 material, thanks!