From: Frank Li <Frank.li@oss.nxp.com>
To: Koichiro Den <den@valinux.co.jp>
Cc: Jon Mason <jdmason@kudzu.us>, Dave Jiang <dave.jiang@intel.com>,
Allen Hubbe <allenbh@gmail.com>, Frank Li <Frank.Li@kernel.org>,
Logan Gunthorpe <logang@deltatee.com>,
fuyuanli <fuyuanli0722@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Nicholas Bellinger <nab@linux-iscsi.org>,
Joey Zhang <joey.zhang@microchip.com>,
ntb@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 04/14] NTB: ntb_transport: Publish link state after QP setup
Date: Fri, 11 Sep 2026 11:39:25 -0500 [thread overview]
Message-ID: <aqQuvWacR6FSaMvn@SMW015318> (raw)
In-Reply-To: <20260910040836.3792333-5-den@valinux.co.jp>
On Thu, Sep 10, 2026 at 01:08:26PM +0900, Koichiro Den wrote:
> ntb_transport_link_work() marks the transport link up before setting
> up the QPs' MW and peer MSI state. A concurrent ntb_transport_link_up()
> can then queue QP link work, which may enable RX and notify the client
> before setup finishes.
>
> Publish link_is_up with a release store after setting up all QPs,
> and use acquire loads before queuing QP link work.
>
> Fixes: fce8a7bb5b4b ("PCI-Express Non-Transparent Bridge Support")
> Cc: stable@vger.kernel.org
> Link: https://lore.kernel.org/r/anyKbq3mpLG4y7rb@SMW015318
> Signed-off-by: Koichiro Den <den@valinux.co.jp>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Changes in v2:
> - No changes.
>
> drivers/ntb/ntb_transport.c | 40 +++++++++++++++++++++++--------------
> 1 file changed, 25 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
> index c77b173dca01..75d4a2e021f4 100644
> --- a/drivers/ntb/ntb_transport.c
> +++ b/drivers/ntb/ntb_transport.c
> @@ -922,6 +922,16 @@ static void ntb_qp_link_down_reset(struct ntb_transport_qp *qp)
> qp->remote_rx_info->entry = qp->rx_max_entry - 1;
> }
>
> +static void ntb_transport_schedule_qp_link(struct ntb_transport_qp *qp,
> + unsigned long delay)
> +{
> + struct ntb_transport_ctx *nt = qp->transport;
> +
> + /* Pair with the link publication in ntb_transport_link_work(). */
> + if (smp_load_acquire(&nt->link_is_up))
> + schedule_delayed_work(&qp->link_work, delay);
> +}
> +
> static void ntb_qp_link_cleanup(struct ntb_transport_qp *qp)
> {
> struct ntb_transport_ctx *nt = qp->transport;
> @@ -941,13 +951,10 @@ static void ntb_qp_link_cleanup_work(struct work_struct *work)
> struct ntb_transport_qp *qp = container_of(work,
> struct ntb_transport_qp,
> link_cleanup);
> - struct ntb_transport_ctx *nt = qp->transport;
>
> ntb_qp_link_cleanup(qp);
> -
> - if (nt->link_is_up)
> - schedule_delayed_work(&qp->link_work,
> - msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT));
> + ntb_transport_schedule_qp_link(qp,
> + msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT));
> }
>
> static void ntb_qp_link_down(struct ntb_transport_qp *qp)
> @@ -1089,16 +1096,19 @@ static void ntb_transport_link_work(struct work_struct *work)
> goto out1;
> }
>
> - nt->link_is_up = true;
> -
> for (i = 0; i < nt->qp_count; i++) {
> - struct ntb_transport_qp *qp = &nt->qp_vec[i];
> -
> ntb_transport_setup_qp_mw(nt, i);
> ntb_transport_setup_qp_peer_msi(nt, i);
> + }
> +
> + /* Publish the link only after every QP has been set up. */
> + smp_store_release(&nt->link_is_up, true);
> +
> + for (i = 0; i < nt->qp_count; i++) {
> + struct ntb_transport_qp *qp = &nt->qp_vec[i];
>
> if (qp->client_ready)
> - schedule_delayed_work(&qp->link_work, 0);
> + ntb_transport_schedule_qp_link(qp, 0);
> }
>
> return;
> @@ -1146,9 +1156,10 @@ static void ntb_qp_link_work(struct work_struct *work)
>
> if (qp->active)
> tasklet_schedule(&qp->rxc_db_work);
> - } else if (nt->link_is_up)
> - schedule_delayed_work(&qp->link_work,
> - msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT));
> + } else {
> + ntb_transport_schedule_qp_link(qp,
> + msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT));
> + }
> }
>
> static int ntb_transport_init_queue(struct ntb_transport_ctx *nt,
> @@ -2392,8 +2403,7 @@ void ntb_transport_link_up(struct ntb_transport_qp *qp)
>
> qp->client_ready = true;
>
> - if (qp->transport->link_is_up)
> - schedule_delayed_work(&qp->link_work, 0);
> + ntb_transport_schedule_qp_link(qp, 0);
> }
> EXPORT_SYMBOL_GPL(ntb_transport_link_up);
>
> --
> 2.51.0
>
next prev parent reply other threads:[~2026-09-11 16:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 4:08 [PATCH v2 00/14] NTB: ntb_transport: Miscellaneous fixes Koichiro Den
2026-09-10 4:08 ` [PATCH v2 01/14] NTB: ntb_transport: Remove the device debugfs directory Koichiro Den
2026-09-10 18:41 ` Frank Li
2026-09-15 17:52 ` Logan Gunthorpe
2026-09-10 4:08 ` [PATCH v2 02/14] NTB: ntb_transport: Start TX offload thread after queue setup Koichiro Den
2026-09-11 16:13 ` Frank Li
2026-09-15 18:08 ` Logan Gunthorpe
2026-09-10 4:08 ` [PATCH v2 03/14] NTB: ntb_transport: Avoid deadlock when cancelling link work Koichiro Den
2026-09-11 16:21 ` Frank Li
2026-09-11 17:41 ` Koichiro Den
2026-09-15 18:19 ` Logan Gunthorpe
2026-09-10 4:08 ` [PATCH v2 04/14] NTB: ntb_transport: Publish link state after QP setup Koichiro Den
2026-09-11 16:39 ` Frank Li [this message]
2026-09-15 18:32 ` Logan Gunthorpe
2026-09-10 4:08 ` [PATCH v2 05/14] NTB: ntb_transport: Avoid losing QP link-up requests Koichiro Den
2026-09-11 16:53 ` Frank Li
2026-09-11 18:04 ` Koichiro Den
2026-09-11 18:21 ` Koichiro Den
2026-09-12 3:20 ` Frank Li
2026-09-12 14:52 ` Koichiro Den
2026-09-10 4:08 ` [PATCH v2 06/14] NTB: ntb_transport: Clear link state before QP cleanup Koichiro Den
2026-09-15 18:55 ` Logan Gunthorpe
2026-09-10 4:08 ` [PATCH v2 07/14] NTB: ntb_transport: Stop QP work before freeing a queue Koichiro Den
2026-09-15 19:59 ` Logan Gunthorpe
2026-09-10 4:08 ` [PATCH v2 08/14] NTB: ntb_transport: Stop RX tasklet scheduling " Koichiro Den
2026-09-10 4:08 ` [PATCH v2 09/14] NTB: ntb_transport: Drain RX tasklets during link cleanup Koichiro Den
2026-09-10 4:08 ` [PATCH v2 10/14] NTB: ntb_transport: Wait for RX completions before resetting a QP Koichiro Den
2026-09-10 4:08 ` [PATCH v2 11/14] NTB: ntb_transport: Prepare remote RX info accesses for MW teardown Koichiro Den
2026-09-10 4:08 ` [PATCH v2 12/14] NTB: ntb_transport: Clear QP pointers when freeing an MW Koichiro Den
2026-09-10 4:08 ` [PATCH v2 13/14] NTB: ntb_transport: Abort link setup on QP MW allocation failure Koichiro Den
2026-09-10 4:08 ` [PATCH v2 14/14] NTB: ntb_transport: Remove clients before freeing transport resources Koichiro Den
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqQuvWacR6FSaMvn@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=allenbh@gmail.com \
--cc=dave.jiang@intel.com \
--cc=den@valinux.co.jp \
--cc=fuyuanli0722@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jdmason@kudzu.us \
--cc=joey.zhang@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=logang@deltatee.com \
--cc=nab@linux-iscsi.org \
--cc=ntb@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®