[PATCHv3] dmaengine: bestcomm: gen_bd: fix out-of-bounds access in PSC parameter lookup

[PATCHv3] dmaengine: bestcomm: gen_bd: fix out-of-bounds access in PSC parameter lookup

[Rosen Penev]

The bcom_psc_params[] array has 6 entries (indices 0-5), but
bcom_psc_gen_bd_rx_init() checked against MPC52xx_PSC_MAXNUM which can
be 12 when CONFIG_PPC_MPC512x is set, allowing indices 6-11 to pass
and read past the array.

A malformed device tree with a large cell-index could therefore trigger
an out-of-bounds read. The garbage initiator and ipr values would then
be used for MMIO writes via out_8(&bcom_eng->regs->ipr[...], ...),
potentially causing out-of-bounds MMIO accesses.

Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 v3: reduce bounds check to single function. It's not used anywhere anyway.
 v2: fix title
 drivers/dma/bestcomm/gen_bd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c
index 61b5746e1a97..208340ecd2b7 100644
--- a/drivers/dma/bestcomm/gen_bd.c
+++ b/drivers/dma/bestcomm/gen_bd.c
@@ -321,7 +321,7 @@ static const struct bcom_psc_params bcom_psc_params[] = {
 struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
 					   phys_addr_t fifo, int maxbufsize)
 {
-	if (psc_num >= MPC52xx_PSC_MAXNUM)
+	if (psc_num >= ARRAY_SIZE(bcom_psc_params))
 		return NULL;
 
 	return bcom_gen_bd_rx_init(queue_len, fifo,
-- 
2.55.0

Re: [PATCHv3] dmaengine: bestcomm: gen_bd: fix out-of-bounds access in PSC parameter lookup

[Frank Li]

On Fri, Sep 11, 2026 at 02:37:47PM -0700, Rosen Penev wrote:
> The bcom_psc_params[] array has 6 entries (indices 0-5), but
> bcom_psc_gen_bd_rx_init() checked against MPC52xx_PSC_MAXNUM which can
> be 12 when CONFIG_PPC_MPC512x is set, allowing indices 6-11 to pass
> and read past the array.
>
> A malformed device tree with a large cell-index could therefore trigger
> an out-of-bounds read. The garbage initiator and ipr values would then
> be used for MMIO writes via out_8(&bcom_eng->regs->ipr[...], ...),
> potentially causing out-of-bounds MMIO accesses.
>
> Assisted-by: LLM
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
>  v3: reduce bounds check to single function. It's not used anywhere anyway.
>  v2: fix title
>  drivers/dma/bestcomm/gen_bd.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/dma/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c
> index 61b5746e1a97..208340ecd2b7 100644
> --- a/drivers/dma/bestcomm/gen_bd.c
> +++ b/drivers/dma/bestcomm/gen_bd.c
> @@ -321,7 +321,7 @@ static const struct bcom_psc_params bcom_psc_params[] = {
>  struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
>  					   phys_addr_t fifo, int maxbufsize)
>  {
> -	if (psc_num >= MPC52xx_PSC_MAXNUM)
> +	if (psc_num >= ARRAY_SIZE(bcom_psc_params))

why bcom_psc_gen_bd_tx_init() do't check it

Frank
>  		return NULL;
>
>  	return bcom_gen_bd_rx_init(queue_len, fifo,
> --
> 2.55.0
>