Re: [PATCH v2 1/3] dt-bindings: dma: fsl,edma: add per-channel child node support

[Frank Li <Frank.li@oss.nxp.com>]

On Wed, Sep 30, 2026 at 02:26:09PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add support for optional per-channel child nodes (dma-channel@<addr>)
> to the fsl,edma binding. Each child node can carry its own reg,
> interrupts, iommus, and power-domains properties, describing a real
> per-channel MMIO region.
>
> Enables per-channel IOMMU stream ID assignment via the standard
> iommus property on each child.
>
> The interrupts property is removed from the required list since
> channels with child nodes carry their own interrupts. Existing DTS
> without child nodes remains valid.
>
> Assisted-by: LLM
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  .../devicetree/bindings/dma/fsl,edma.yaml          | 70 +++++++++++++++++++++-
>  1 file changed, 69 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> index f609038e35ae..19a103baccaf 100644
> --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> @@ -104,11 +104,40 @@ properties:
>        Bit semantics: 0 means channel available, 1 means channel unavailable
>      default: 0
>
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges: true
> +
> +patternProperties:
> +  "^dma-channel@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +        description: Per-channel register region within the eDMA block.
> +
> +      interrupts:
> +        maxItems: 1
> +
> +      iommus:
> +        maxItems: 1
> +
> +      power-domains:
> +        maxItems: 1
> +
> +    required:
> +      - reg
> +
>  required:
>    - "#dma-cells"
>    - compatible
>    - reg
> -  - interrupts
>    - dma-channels
>
>  allOf:
> @@ -351,3 +380,42 @@ examples:
>                        <&pd IMX_SC_R_DMA_3_CH6>,
>                        <&pd IMX_SC_R_DMA_3_CH7>;
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    dma-controller@42000000 {
> +      compatible = "fsl,imx95-edma5";
> +      reg = <0x42000000 0x210000>;
> +      #dma-cells = <3>;
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges;
> +      dma-channels = <64>;
> +      clocks = <&clk 0>;
> +      clock-names = "dma";
> +
> +      dma-channel@42020000 {
> +        reg = <0x42020000 0x8000>;
> +        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
> +        iommus = <&smmu 0x30>;
> +      };
> +
> +      dma-channel@42028000 {
> +        reg = <0x42028000 0x8000>;
> +        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
> +        iommus = <&smmu 0x30>;
> +      };
> +
> +      dma-channel@42030000 {
> +        reg = <0x42030000 0x8000>;
> +        interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> +        iommus = <&smmu 0x31>;
> +      };
> +
> +      dma-channel@42038000 {
> +        reg = <0x42038000 0x8000>;
> +        interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> +        iommus = <&smmu 0x31>;
> +      };

Nit: kept 2 dma-channel should be enough.

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> +    };
>
> --
> 2.51.0
>