mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "Ali Ahmet Memiş" <aliamemis@disroot.org>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Mark Pearson" <mpearson-lenovo@squebb.ca>,
	"Derek J. Clark" <derekjohn.clark@gmail.com>,
	"Henrique de Moraes Holschuh" <hmh@hmh.eng.br>,
	"Hans de Goede" <hansg@kernel.org>,
	"Nitin Joshi" <nitjoshi@gmail.com>,
	"Andrzej Pietrasiewicz" <andrzej.p@collabora.com>,
	platform-driver-x86@vger.kernel.org,
	ibm-acpi-devel@lists.sourceforge.net,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] platform/x86: thinkpad_acpi: Use input_device_enabled()
Date: Wed, 30 Sep 2026 12:37:54 -0700	[thread overview]
Message-ID: <ar1iwx_390hWw_e7@google.com> (raw)
In-Reply-To: <20260930075829.53484-1-aliamemis@disroot.org>

On Wed, Sep 30, 2026 at 10:58:29AM +0300, Ali Ahmet Memiş wrote:
> On Tue, Sep 15, 2026 at 02:32:34PM +0300, Ilpo Järvinen wrote:
> > [1/1] platform/x86: thinkpad_acpi: Use input_device_enabled()
> >       commit: be0048786d53375fa4eace15cfdf65593956a1a2
> 
> This hangs on module load for me. hotkey_inputdev_open() gets
> called from input_open_device() with dev->mutex already held, so the
> new lock in hotkey_poll_setup() deadlocks:
> 
>   INFO: task insmod:28182 is blocked on a mutex likely owned by task insmod:28182.
>    hotkey_poll_setup+0x50/0x140 [thinkpad_acpi]
>    hotkey_inputdev_open+0x36/0x50 [thinkpad_acpi]
>    input_open_device+0x9d/0x130
>    kbd_connect+0x8f/0xb0
> 
> I guess hotkey_inputdev_close() has the same issue. This was
> next-20260929's thinkpad_acpi.c built against 7.1.11.

Hmm, indeed. I wonder if below will fox this for you.

-- 
Dmitry

platform/x86: thinkpad_acpi: fix deadlock in hotkey input open/close

Commit d6479c25ecef ("platform/x86: thinkpad_acpi: Use
input_device_enabled()") changed hotkey_poll_setup() to acquire
tpacpi_inputdev->mutex and call input_device_enabled(tpacpi_inputdev).

However, the input core already holds dev->mutex when invoking a
device's open() and close() callbacks. Because hotkey_inputdev_open()
and hotkey_inputdev_close() call into hotkey_poll_setup(), attempting to
acquire tpacpi_inputdev->mutex again results in an immediate
self-deadlock.

Additionally, locking tpacpi_inputdev->mutex inside hotkey_poll_setup()
while holding hotkey_mutex introduces an ABBA lock ordering inversion
with hotkey_inputdev_open() and hotkey_inputdev_close(), which acquire
hotkey_mutex while holding tpacpi_inputdev->mutex. Finally,
input_inhibit_device() calls dev->close() before setting dev->inhibited,
so input_device_enabled() still returns true inside
hotkey_inputdev_close().

Track whether the input device is active in a driver-local boolean
protected by hotkey_mutex instead of locking tpacpi_inputdev->mutex and
querying input_device_enabled().

Fixes: d6479c25ecef ("platform/x86: thinkpad_acpi: Use input_device_enabled()")
Assisted-by: LLM
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/platform/x86/lenovo/thinkpad_acpi.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/lenovo/thinkpad_acpi.c b/drivers/platform/x86/lenovo/thinkpad_acpi.c
index 1225b01ed14d..40e9763a12f8 100644
--- a/drivers/platform/x86/lenovo/thinkpad_acpi.c
+++ b/drivers/platform/x86/lenovo/thinkpad_acpi.c
@@ -1887,6 +1887,7 @@ static u32 hotkey_reserved_mask;	/* events better left disabled */
 static u32 hotkey_driver_mask;		/* events needed by the driver */
 static u32 hotkey_user_mask;		/* events visible to userspace */
 static u32 hotkey_acpi_mask;		/* events enabled in firmware */
+static bool hotkey_input_enabled;
 
 static bool tpacpi_driver_event(const unsigned int hkey_event);
 static void hotkey_poll_setup(const bool may_warn);
@@ -2544,10 +2545,8 @@ static void hotkey_poll_setup(const bool may_warn)
 
 	lockdep_assert_held(&hotkey_mutex);
 
-	guard(mutex)(&tpacpi_inputdev->mutex);
 	if (hotkey_poll_freq > 0 &&
-	    (poll_driver_mask ||
-	     (poll_user_mask && input_device_enabled(tpacpi_inputdev)))) {
+	    (poll_driver_mask || (poll_user_mask && hotkey_input_enabled))) {
 		if (!tpacpi_hotkey_task) {
 			tpacpi_hotkey_task = kthread_run(hotkey_kthread,
 					NULL, TPACPI_NVRAM_KTHREAD_NAME);
@@ -2602,7 +2601,10 @@ static int hotkey_inputdev_open(struct input_dev *dev)
 	switch (tpacpi_lifecycle) {
 	case TPACPI_LIFE_INIT:
 	case TPACPI_LIFE_RUNNING:
-		hotkey_poll_setup_safe(false);
+		scoped_guard(mutex, &hotkey_mutex) {
+			hotkey_input_enabled = true;
+			hotkey_poll_setup(false);
+		}
 		return 0;
 	case TPACPI_LIFE_EXITING:
 		return -EBUSY;
@@ -2615,10 +2617,14 @@ static int hotkey_inputdev_open(struct input_dev *dev)
 
 static void hotkey_inputdev_close(struct input_dev *dev)
 {
+	guard(mutex)(&hotkey_mutex);
+
+	hotkey_input_enabled = false;
+
 	/* disable hotkey polling when possible */
 	if (tpacpi_lifecycle != TPACPI_LIFE_EXITING &&
 	    !(hotkey_source_mask & hotkey_driver_mask))
-		hotkey_poll_setup_safe(false);
+		hotkey_poll_setup(false);
 }
 
 /* sysfs hotkey enable ------------------------------------------------- */
-- 
2.56.0.rc1.315.gc6ed9934b7-goog


  reply	other threads:[~2026-09-30 19:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05  4:03 Dmitry Torokhov
2026-08-05 14:51 ` Mark Pearson
2026-08-05 15:52   ` Dmitry Torokhov
2026-08-05 16:15     ` Mark Pearson
2026-08-06  6:20       ` Dmitry Torokhov
2026-09-15 11:32 ` Ilpo Järvinen
2026-09-30  7:58   ` Ali Ahmet Memiş
2026-09-30 19:37     ` Dmitry Torokhov [this message]
2026-09-30 20:00       ` Ali Ahmet Memiş

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ar1iwx_390hWw_e7@google.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=aliamemis@disroot.org \
    --cc=andrzej.p@collabora.com \
    --cc=derekjohn.clark@gmail.com \
    --cc=hansg@kernel.org \
    --cc=hmh@hmh.eng.br \
    --cc=ibm-acpi-devel@lists.sourceforge.net \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpearson-lenovo@squebb.ca \
    --cc=nitjoshi@gmail.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®