* [PATCH v2 2/2] arm64: dts: qcom: sm8650: Add initial Valve Deckard devicetree
2026-09-23 12:16 [PATCH v2 0/2] arm64: dts: qcom: sm8650: add support from Valve Deckard headset Neil Armstrong
2026-09-23 12:16 ` [PATCH v2 1/2] dt-bindings: arm: qcom: document the " Neil Armstrong
@ 2026-09-23 12:16 ` Neil Armstrong
2026-09-23 16:06 ` Konrad Dybcio
2026-09-23 22:20 ` [PATCH v2 0/2] arm64: dts: qcom: sm8650: add support from Valve Deckard headset Bjorn Andersson
2026-09-24 0:53 ` Bjorn Andersson
3 siblings, 1 reply; 8+ messages in thread
From: Neil Armstrong @ 2026-09-23 12:16 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli
Cc: linux-arm-msm, devicetree, linux-kernel, Neil Armstrong
Add an initial DeviceTree for the Valve "Steam Frame"
codename Deckard. The Steam Frame is a virtual reality headset
based on the Qualcomm Snapdragon 8 Gen 3 SoC (SM8650).
Providing initial support for:
- System reserved memory, regulators, gpio keys, PMIC functions..
- PMIC ADC Channels
- UFS Storage
- USB Gadget
- WCN7850 Wifi7 + Bluetooth
- I2C + basic peripherals
- SDCard slot
The bootloader starts Linux in EL2, thus a bunch of EL1 & DSP related
nodes needs to be removed and the reserved-memory mapping must
be defined.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8650-valve-deckard.dts | 1288 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8650.dtsi | 6 +-
3 files changed, 1292 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1c86e7e98f55..3de6d95135a7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -406,6 +406,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-rear-camera-card.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8650-valve-deckard.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8650-valve-deckard.dts b/arch/arm64/boot/dts/qcom/sm8650-valve-deckard.dts
new file mode 100644
index 000000000000..d25a09e162dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-valve-deckard.dts
@@ -0,0 +1,1288 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026, Valve Software
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/phy/phy.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/* Remove nodes */
+/delete-node/ &ipa;
+/delete-node/ &gpu_zap_shader;
+/delete-node/ &lpass_wsa2macro;
+/delete-node/ &lpass_rxmacro;
+/delete-node/ &lpass_txmacro;
+/delete-node/ &lpass_wsamacro;
+/delete-node/ &lpass_vamacro;
+/delete-node/ &lpass_tlmm;
+/delete-node/ &remoteproc_adsp;
+/delete-node/ &remoteproc_cdsp;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &reserved_memory;
+/delete-node/ &smp2p_adsp;
+/delete-node/ &smp2p_cdsp;
+/delete-node/ &smp2p_modem;
+/delete-node/ &swr0;
+/delete-node/ &swr1;
+/delete-node/ &swr2;
+/delete-node/ &swr3;
+
+/ {
+ model = "Valve Deckard";
+ compatible = "valve,deckard", "qcom,sm8650";
+
+ aliases {
+ serial0 = &uart15;
+ serial1 = &uart14;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ width = <4320>;
+ height = <2160>;
+ stride = <(4320 * 4)>;
+ format = "a8r8g8b8";
+ memory-region = <&framebuffer_mem>;
+
+ /* Bootloader will enable the node */
+ status = "disabled";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_n>, <&select_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+
+ key-select {
+ label = "Select";
+ linux,code = <KEY_SELECT>;
+ gpios = <&pm8550b_gpios 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ aop_mem: aop-region@81c00000 {
+ no-map;
+ reg = <0 0x81c00000 0 0x60000>;
+ };
+
+ ramoops: ramoops-region@84a00000 {
+ compatible = "ramoops";
+ reg = <0 0x84a00000 0 0x100000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ pmsg-size = <0x1000>;
+ ecc-size = <16>;
+ };
+
+ aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+ compatible = "qcom,cmd-db";
+ reg = <0 0x81c60000 0 0x20000>;
+ no-map;
+ };
+
+ /* merged aop_config, tme_crash_dump, tme_log */
+ aop_config_merged_mem: aop-config-merged-region@81c80000 {
+ reg = <0 0x81c80000 0 0x75000>;
+ no-map;
+ };
+
+ smem: smem-region@81d00000 {
+ compatible = "qcom,smem";
+ reg = <0 0x81d00000 0 0x200000>;
+ hwlocks = <&tcsr_mutex 3>;
+ no-map;
+ };
+
+ cpucp_fw_mem: cpucp-fw-region@d8040000 {
+ reg = <0 0xd8040000 0 0x1b2000>;
+ no-map;
+ };
+
+ video_mem: video-region@9bb00000 {
+ reg = <0 0x9bb00000 0 0x800000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat-region@82700000 {
+ reg = <0 0x82700000 0 0x100000>;
+ no-map;
+ };
+
+ /* 2MB, 8 clocks to power on each 256KB block */
+ lpass_lpi_tcm: lpm-region@6000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x06000000 0 0x00200000>;
+ no-map;
+ };
+
+ /* 64KB, 4 clocks to power on each 16KB block */
+ lpass_audio_lpm: lpm-region@6c80000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x06c80000 0 0x10000>;
+ no-map;
+ };
+
+ /* 12KB, 1 clock */
+ lpass_va_lpm: lpm-region@6d40000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x06d40000 0 0x3000>;
+ no-map;
+ };
+
+ lpass_lpm: lpm-region@7c10000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x07c10000 0 0x8000>;
+ no-map;
+ };
+
+ framebuffer_mem: framebuffer-region@af400000 {
+ reg = <0 0xaf400000 0 0x03000000>;
+ no-map;
+ };
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ pinctrl-0 = <&wlan_en>, <&bt_default>;
+ pinctrl-names = "default";
+
+ wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s4i_0p85>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddio1p2-supply = <&vreg_l3c_1p2>;
+ vddaon-supply = <&vreg_s2c_0p8>;
+ vdddig-supply = <&vreg_s3c_0p9>;
+ vddrfa1p2-supply = <&vreg_s1c_1p2>;
+ vddrfa1p8-supply = <&vreg_s6c_1p8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s6c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s6c_1p8>;
+ vdd-l15-supply = <&vreg_s6c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ qcom,pmic-id = "b";
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s1c_1p2>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "c";
+
+ vreg_s1c_1p2: smps1 {
+ regulator-name = "vreg_s1c_1p2";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1348000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2c_0p8: smps2 {
+ regulator-name = "vreg_s2c_0p8";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1036000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3c_0p9: smps3 {
+ regulator-name = "vreg_s3c_0p9";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <1064000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4c_1p2: smps4 {
+ regulator-name = "vreg_s4c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5c_0p7: smps5 {
+ regulator-name = "vreg_s5c_0p7";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6c_1p8: smps6 {
+ regulator-name = "vreg_s6c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_1p2: ldo3 {
+ regulator-name = "vreg_l3c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "d";
+
+ vreg_l1d_0p9: ldo1 {
+ regulator-name = "vreg_l1d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l3-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "e";
+
+ vreg_l3e_0p9: ldo3 {
+ regulator-name = "vreg_l3e_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+ vdd-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "g";
+
+ vreg_l1g_0p9: ldo1 {
+ regulator-name = "vreg_l1g_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2g_1p1: ldo2 {
+ regulator-name = "vreg_l2g_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_0p91: ldo3 {
+ regulator-name = "vreg_l3g_0p91";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+ vdd-l2-supply = <&vreg_s3c_0p9>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "i";
+
+ vreg_s4i_0p85: smps4 {
+ regulator-name = "vreg_s4i_0p85";
+ regulator-min-microvolt = <852000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_0p88: ldo1 {
+ regulator-name = "vreg_l1i_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_0p88: ldo2 {
+ regulator-name = "vreg_l2i_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_1p2: ldo3 {
+ regulator-name = "vreg_l3i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+
+ vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6c_1p8>;
+ vdd-l6-supply = <&vreg_bob2>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ qcom,pmic-id = "m";
+
+ vreg_l1m_1p1: ldo1 {
+ regulator-name = "vreg_l1m_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p2: ldo2 {
+ regulator-name = "vreg_l2m_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_2p8: ldo6 {
+ regulator-name = "vreg_l6m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_3p3: ldo7 {
+ regulator-name = "vreg_l7m_3p3";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+ regulator-always-on;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+
+ vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6c_1p8>;
+ vdd-l6-supply = <&vreg_bob2>;
+
+ qcom,pmic-id = "n";
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p2: ldo2 {
+ regulator-name = "vreg_l2n_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_2p8: ldo3 {
+ regulator-name = "vreg_l3n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_2p8: ldo4 {
+ regulator-name = "vreg_l4n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_1p8: ldo5 {
+ regulator-name = "vreg_l5n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_2p8: ldo6 {
+ regulator-name = "vreg_l6n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc {
+ status = "disabled";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c_hub_8 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ right_spkr_i2s: speaker@38 {
+ compatible = "maxim,max98390";
+ reg = <0x38>;
+
+ reset-gpios = <&tlmm 73 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&r_spkr_irq_default>;
+ pinctrl-names = "default";
+
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "Speaker Right";
+
+ maxim,temperature_calib = <1024>;
+ maxim,r0_calib = <100232>;
+ };
+
+ left_spkr_i2s: speaker@3d {
+ compatible = "maxim,max98390";
+ reg = <0x3d>;
+
+ reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&l_spkr_irq_default>;
+ pinctrl-names = "default";
+
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "Speaker Left";
+
+ maxim,temperature_calib = <1024>;
+ maxim,r0_calib = <100232>;
+ };
+
+ light-sensor@60 {
+ compatible = "vishay,vcnl4040";
+ reg = <0x60>;
+
+ vdd-supply = <&vreg_l2b_3p0>;
+ vio-supply = <&vreg_l1b_1p8>;
+
+ proximity-near-level = <220>;
+ };
+};
+
+&i2c_master_hub_0 {
+ firmware-name = "qcom/sm8650/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+
+ label = "strap_eeprom";
+ vcc-supply = <&vreg_l15b_1p8>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c04";
+ reg = <0x51>;
+
+ label = "strap_v2_eeprom";
+ vcc-supply = <&vreg_l15b_1p8>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ magnetometer@6c {
+ compatible = "allegromicro,als31300-500";
+ reg = <0x6c>;
+
+ vcc-supply = <&vreg_l2b_3p0>;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ label = "core_v2_eeprom";
+ vcc-supply = <&vreg_l15b_1p8>;
+ pagesize = <32>;
+ size = <8192>;
+ address-width = <16>;
+ wp-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pcie0 {
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0 0 0 0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1i_0p88>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio12";
+ function = "normal";
+ bias-pull-up;
+ input-enable;
+ output-disable;
+ power-source = <1>; /* 1.8 V */
+ };
+
+ volume_up_n: volume-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-pull-up;
+ input-enable;
+ power-source = <1>;
+ };
+};
+
+&pm8550_pwm {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+ default-state = "keep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+&pm8550_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(1)>;
+ io-channel-names = "thermal";
+};
+
+&pm8550b_gpios {
+ detect_n: detect-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ select_n: select-n-state {
+ pins = "gpio5";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pm8550b_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(7)>;
+ io-channel-names = "thermal";
+};
+
+&pm8550vs_c {
+ status = "okay";
+};
+
+&pm8550vs_c_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(2)>;
+ io-channel-names = "thermal";
+};
+
+&pm8550vs_d {
+ status = "okay";
+};
+
+&pm8550vs_d_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(3)>;
+ io-channel-names = "thermal";
+};
+
+&pm8550vs_e {
+ status = "okay";
+};
+
+&pm8550vs_e_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(4)>;
+ io-channel-names = "thermal";
+};
+
+&pm8550vs_g {
+ status = "okay";
+};
+
+&pm8550vs_g_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(6)>;
+ io-channel-names = "thermal";
+};
+
+&pm8550ve_temp_alarm {
+ io-channels = <&pmk8550_vadc ADC5_GEN3_DIE_TEMP(PMK8550VE_SID)>;
+ io-channel-names = "thermal";
+};
+
+&pmk8550_rtc {
+ allow-set-time;
+
+ status = "okay";
+};
+
+&pmk8550_vadc {
+ /* PMK8550 Channel nodes */
+ channel@44 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(0)>;
+ label = "pmk8550_xo_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@49 {
+ reg = <ADC5_GEN3_AMUX6_THM_100K_PU(0)>;
+ label = "display_left_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <15>;
+ };
+
+ /* PM8550 Channel nodes */
+ channel@100 {
+ reg = <ADC5_GEN3_REF_GND(1)>;
+ label = "pm8550_offset_ref";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@101 {
+ reg = <ADC5_GEN3_1P25VREF(1)>;
+ label = "pm8550_vref_1p25";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@103 {
+ reg = <ADC5_GEN3_DIE_TEMP(1)>;
+ label = "pm8550_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@144 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(1)>;
+ label = "pcba_at_fan_exhaust";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@145 {
+ reg = <ADC5_GEN3_AMUX2_THM_100K_PU(1)>;
+ label = "pcba_at_40pin_connector";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@146 {
+ reg = <ADC5_GEN3_AMUX3_THM_100K_PU(1)>;
+ label = "pcba_at_wifi";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@147 {
+ reg = <ADC5_GEN3_AMUX4_THM_100K_PU(1)>;
+ label = "pcba_at_flash";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@148 {
+ reg = <ADC5_GEN3_AMUX5_THM_100K_PU(1)>;
+ label = "pcba_at_nrf";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@18e {
+ reg = <ADC5_GEN3_VPH_PWR(1)>;
+ label = "pm8550_vph_pwr";
+ qcom,pre-scaling = <1 3>;
+ };
+
+ /* PM8550VS_C Channel nodes */
+ channel@203 {
+ reg = <ADC5_GEN3_DIE_TEMP(2)>;
+ label = "pm8550vs_c_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ /* PM8550VS_D Channel nodes */
+ channel@303 {
+ reg = <ADC5_GEN3_DIE_TEMP(3)>;
+ label = "pm8550vs_d_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ /* PM8550VS_E Channel nodes */
+ channel@403 {
+ reg = <ADC5_GEN3_DIE_TEMP(4)>;
+ label = "pm8550vs_e_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ /* PM8550VE Channel nodes */
+ channel@503 {
+ reg = <ADC5_GEN3_DIE_TEMP(PMK8550VE_SID)>;
+ label = "pm8550ve_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ /* PM8550VS_G Channel nodes */
+ channel@603 {
+ reg = <ADC5_GEN3_DIE_TEMP(6)>;
+ label = "pm8550vs_g_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ /* PM8550B Channel nodes */
+ channel@700 {
+ reg = <ADC5_GEN3_REF_GND(7)>;
+ label = "pm8550b_offset_ref";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@701 {
+ reg = <ADC5_GEN3_1P25VREF(7)>;
+ label = "pm8550b_vref_1p25";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@703 {
+ reg = <ADC5_GEN3_DIE_TEMP(7)>;
+ label = "pm8550b_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ channel@711 {
+ reg = <ADC5_GEN3_USB_SNS_V_16(7)>;
+ label = "pm8550b_usb_sns_v_div_16";
+ qcom,pre-scaling = <1 16>;
+ };
+
+ channel@712 {
+ reg = <ADC5_GEN3_VIN_DIV16_MUX(7)>;
+ label = "pm8550b_wls_vin_div_16";
+ qcom,pre-scaling = <1 16>;
+ };
+
+ channel@744 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(7)>;
+ label = "battery_temp";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@747 {
+ reg = <ADC5_GEN3_AMUX4_THM_100K_PU(7)>;
+ label = "pcba_at_heat_sink_fins";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ channel@78e {
+ reg = <ADC5_GEN3_VPH_PWR(7)>;
+ label = "pm8550b_vph_pwr";
+ qcom,pre-scaling = <1 3>;
+ };
+
+ channel@78f {
+ reg = <ADC5_GEN3_VBAT_SNS_QBG(7)>;
+ label = "pm8550b_vbat_sns_qbg";
+ qcom,pre-scaling = <1 6>;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ firmware-name = "qcom/sm8650/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ firmware-name = "qcom/sm8650/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l8b_1p8>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+
+ pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32764>;
+};
+
+&tlmm {
+ bt_default: bt-default-state {
+ bt-en-pins {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ sw-ctrl-pins {
+ pins = "gpio18";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ i2c4_default: i2c4-default-state {
+ pins = "gpio48", "gpio49";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ i2c5_default: i2c5-default-state {
+ pins = "gpio52", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ l_spkr_irq_default: l-spkr-irq-state-state {
+ pins = "gpio77";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ r_spkr_irq_default: r-spkr-irq-default-state {
+ pins = "gpio186";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ wlan_en: wlan-en-state {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+ max-speed = <3200000>;
+ };
+};
+
+&uart15 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1c_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p9>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "peripheral";
+
+ /* USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+ maximum-speed = "high-speed";
+
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l1i_0p88>;
+ vdda12-supply = <&vreg_l3i_1p2>;
+
+ phys = <&pm8550b_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index b679fd8afb7d..9988b269b20f 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -1907,7 +1907,7 @@ llcc_lpi_mem: llcc-lpi@ff800000 {
};
};
- smp2p-adsp {
+ smp2p_adsp: smp2p-adsp {
compatible = "qcom,smp2p";
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
@@ -1933,7 +1933,7 @@ smp2p_adsp_in: slave-kernel {
};
};
- smp2p-cdsp {
+ smp2p_cdsp: smp2p-cdsp {
compatible = "qcom,smp2p";
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
@@ -1959,7 +1959,7 @@ smp2p_cdsp_in: slave-kernel {
};
};
- smp2p-modem {
+ smp2p_modem: smp2p-modem {
compatible = "qcom,smp2p";
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
--
2.34.1
^ permalink raw reply [flat|nested] 8+ messages in thread