[PATCH 0/8] Display support for TQMa6UL[L]x

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [PATCH 0/8] Display support for TQMa6UL[L]x
@ 2026-10-02  8:14 Alexander Stein
  2026-10-02  8:14 ` [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx Alexander Stein
                   ` (7 more replies)
  0 siblings, 8 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

Hello everyone,

with the integration of custom bitwidth on DPI output in commit aafd4205a75de
("drm: mxsfb: Add optional DPI output bus-width configuration") the display
support for TQMa6UL[L]x on MBa6ULx can be added.
The mainboard uses a slightly different hardware connection which needs
customization.
Both LVDS and parallel display support is added resuing the DT overlays
for all the variants.

Thanks and best regards
Alexander

Alexander Stein (8):
  ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx
  ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULxL
  ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLx
  ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLxL
  ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULx
  ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULxL
  ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLx
  ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLxL

 arch/arm/boot/dts/nxp/imx/Makefile            | 26 +++++++
 .../imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso  | 53 ++++++++++++++
 .../imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso  | 53 ++++++++++++++
 ...6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso | 69 +++++++++++++++++++
 arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi        | 64 +++++++++++++++++
 5 files changed, 265 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso

-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02 14:37   ` Frank Li
  2026-10-02  8:14 ` [PATCH 2/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULxL Alexander Stein
                   ` (6 subsequent siblings)
  7 siblings, 1 reply; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

The generic setup like pinmux and lcdif <-> display connection is done
in the mainboard while LVDS specific setup is done in the overlay.
As this mainboard also supports parallel display the LVDS connection
using an LVDS encoder is done in the overlay.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile            |  4 ++
 ...6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso | 69 +++++++++++++++++++
 arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi        | 64 +++++++++++++++++
 3 files changed, 137 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index c5caca92ea10c..ea0799ba1893e 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -420,6 +420,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ulz-14x14-evk.dtb \
 	imx6ulz-bsh-smm-m2.dtb
 
+imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
+
 imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
 	imx7d-colibri-emmc-aster.dtb \
 	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso
new file mode 100644
index 0000000000000..e44b7461001ea
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander_out0 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_mba6ul_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_in: endpoint {
+					remote-endpoint = <&lcdif_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_out: endpoint {
+					remote-endpoint = <&display_in>;
+				};
+			};
+		};
+	};
+};
+
+&backlight {
+	pwms = <&pwm2 0 62500 0>;
+	brightness-levels = <0 16 32 64 96 128 160 192 224 255>;
+	default-brightness-level = <5>;
+	status = "okay";
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	power-supply = <&reg_mba6ul_5v0>;
+	status = "okay";
+};
+
+&display_in {
+	remote-endpoint = <&lvds_encoder_out>;
+};
+
+/* for lcd reset != #stkrst */
+/* place r2021, resolder r2022 and iomux following: */
+/* MX6UL_PAD_LCD_RESET__GPIO3_IO04	0x79 */
+&lcdif {
+	status = "okay";
+};
+
+&lcdif_out {
+	remote-endpoint = <&lvds_encoder_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index fd05479bbffc9..ba79bb9760806 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -30,6 +30,21 @@ beeper: beeper {
 		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
 	};
 
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
 	gpio_buttons: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -299,6 +314,17 @@ se97b: eeprom@51 {
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>, <&pinctrl_lcdifctrl>;
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&display_in>;
+		};
+	};
+};
+
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
@@ -466,6 +492,44 @@ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
 		>;
 	};
 
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_lcdifctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+		>;
+	};
+
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
 			/* 100 k PD, DSE 120 OHM, SPEED LO */
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx
  2026-10-02  8:14 ` [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx Alexander Stein
@ 2026-10-02 14:37   ` Frank Li
  0 siblings, 0 replies; 10+ messages in thread
From: Frank Li @ 2026-10-02 14:37 UTC (permalink / raw)
  To: Alexander Stein
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
	imx, linux-arm-kernel, linux-kernel, linux

On Fri, Oct 02, 2026 at 10:14:02AM +0200, Alexander Stein wrote:
> The generic setup like pinmux and lcdif <-> display connection is done
> in the mainboard while LVDS specific setup is done in the overlay.
> As this mainboard also supports parallel display the LVDS connection
> using an LVDS encoder is done in the overlay.
>
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
>  arch/arm/boot/dts/nxp/imx/Makefile            |  4 ++
>  ...6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso | 69 +++++++++++++++++++
>  arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi        | 64 +++++++++++++++++
>  3 files changed, 137 insertions(+)
>  create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso
>
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index c5caca92ea10c..ea0799ba1893e 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -420,6 +420,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ulz-14x14-evk.dtb \
>  	imx6ulz-bsh-smm-m2.dtb
>
> +imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
> +
> +dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
> +
>  imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
>  	imx7d-colibri-emmc-aster.dtb \
>  	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso
> new file mode 100644
> index 0000000000000..e44b7461001ea
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtso
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright 2018-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Markus Niebel
> + * Author: Alexander Stein
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +&{/} {
> +	lvds_encoder: lvds-encoder {
> +		compatible = "ti,sn75lvds83", "lvds-encoder";


Can you check if shared one overlay files with
ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso

I suppose use the model between two boards.

You use two labels like

reg_lvds: reg_mba6ul_3v3: regulator { ... } to create unified label naming
for regulator.

GPIO can use nexus node to do mapping.

https://lore.kernel.org/imx/20261001-verdin-imx8mp-hmp-camera-ready-v2-3-7d1343ecd3ec@toradex.com/

Frank

> +		powerdown-gpios = <&expander_out0 3 GPIO_ACTIVE_LOW>;
> +		power-supply = <&reg_mba6ul_3v3>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				lvds_encoder_in: endpoint {
> +					remote-endpoint = <&lcdif_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				lvds_encoder_out: endpoint {
> +					remote-endpoint = <&display_in>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&backlight {
> +	pwms = <&pwm2 0 62500 0>;
> +	brightness-levels = <0 16 32 64 96 128 160 192 224 255>;
> +	default-brightness-level = <5>;
> +	status = "okay";
> +};
> +
> +&display {
> +	compatible = "tianma,tm070jvhg33";
> +	power-supply = <&reg_mba6ul_5v0>;
> +	status = "okay";
> +};
> +
> +&display_in {
> +	remote-endpoint = <&lvds_encoder_out>;
> +};
> +
> +/* for lcd reset != #stkrst */
> +/* place r2021, resolder r2022 and iomux following: */
> +/* MX6UL_PAD_LCD_RESET__GPIO3_IO04	0x79 */
> +&lcdif {
> +	status = "okay";
> +};
> +
> +&lcdif_out {
> +	remote-endpoint = <&lvds_encoder_in>;
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
> index fd05479bbffc9..ba79bb9760806 100644
> --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
> @@ -30,6 +30,21 @@ beeper: beeper {
>  		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
>  	};
>
> +	display: display {
> +		/*
> +		 * Display is not fixed, so compatible has to be added from
> +		 * DT overlay
> +		 */
> +		backlight = <&backlight>;
> +		status = "disabled";
> +
> +		port {
> +			display_in: endpoint {
> +				remote-endpoint = <&lcdif_out>;
> +			};
> +		};
> +	};
> +
>  	gpio_buttons: gpio-keys {
>  		compatible = "gpio-keys";
>  		pinctrl-names = "default";
> @@ -299,6 +314,17 @@ se97b: eeprom@51 {
>  	};
>  };
>
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif>, <&pinctrl_lcdifctrl>;
> +
> +	port {
> +		lcdif_out: endpoint {
> +			remote-endpoint = <&display_in>;
> +		};
> +	};
> +};
> +
>  &pwm2 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_pwm2>;
> @@ -466,6 +492,44 @@ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
>  		>;
>  	};
>
> +	pinctrl_lcdif: lcdifgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
> +			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
> +			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
> +			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
> +			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
> +			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
> +			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
> +			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
> +			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
> +			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
> +			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
> +			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
> +			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
> +			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
> +			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
> +			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
> +			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
> +			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
> +			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
> +			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
> +			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
> +			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
> +			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
> +			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
> +		>;
> +	};
> +
> +	pinctrl_lcdifctrl: lcdifctrlgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
> +			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
> +			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
> +			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
> +		>;
> +	};
> +
>  	pinctrl_pwm2: pwm2grp {
>  		fsl,pins = <
>  			/* 100 k PD, DSE 120 OHM, SPEED LO */
> --
> 2.55.0
>
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULxL
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
  2026-10-02  8:14 ` [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02  8:14 ` [PATCH 3/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLx Alexander Stein
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

This simply reuses the .dtso file from TQMa6ULx.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index ea0799ba1893e..734d40b8d389c 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -421,8 +421,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ulz-bsh-smm-m2.dtb
 
 imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33.dtb
 
 imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
 	imx7d-colibri-emmc-aster.dtb \
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 3/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLx
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
  2026-10-02  8:14 ` [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx Alexander Stein
  2026-10-02  8:14 ` [PATCH 2/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULxL Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02  8:14 ` [PATCH 4/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLxL Alexander Stein
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

This simply reuses the .dtso file from TQMa6ULx.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 734d40b8d389c..1a84026e6df0f 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -422,9 +422,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 
 imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33.dtb
 
 imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
 	imx7d-colibri-emmc-aster.dtb \
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 4/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLxL
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
                   ` (2 preceding siblings ...)
  2026-10-02  8:14 ` [PATCH 3/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLx Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02  8:14 ` [PATCH 5/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULx Alexander Stein
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

This simply reuses the .dtso file from TQMa6ULx.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 1a84026e6df0f..08d88adce2b7e 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -423,10 +423,12 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33.dtb
 
 imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
 	imx7d-colibri-emmc-aster.dtb \
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 5/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULx
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
                   ` (3 preceding siblings ...)
  2026-10-02  8:14 ` [PATCH 4/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLxL Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02  8:14 ` [PATCH 6/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULxL Alexander Stein
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

Both displays are attached on X4 and differ only in display settings.
Note: Due to hardware wiring a 24-Bit bus-width has to be used.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile            |  4 ++
 .../imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso  | 53 +++++++++++++++++++
 .../imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso  | 53 +++++++++++++++++++
 3 files changed, 110 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 08d88adce2b7e..3d34af776a5bb 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -421,11 +421,15 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ulz-bsh-smm-m2.dtb
 
 imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ul-tqma6ul2-mba6ulx-cdtech-dc44-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
+imx6ul-tqma6ul2-mba6ulx-cdtech-fc21-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtbo
 imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33.dtb
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso
new file mode 100644
index 0000000000000..12bafa497067e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight {
+	pwms = <&pwm2 0 20000 0>;
+	brightness-levels = <0 2 4 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	status = "okay";
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	power-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&expander_in0>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+		/* reset-gpios is controlled by stk reset */
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		iovcc-supply = <&reg_mba6ul_3v3>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&lcdif_out {
+	bus-width = <24>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso
new file mode 100644
index 0000000000000..36a055d34c354
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight {
+	pwms = <&pwm2 0 20000 0>;
+	brightness-levels = <0 2 4 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	status = "okay";
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	power-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&expander_in0>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+		/* reset-gpios is controlled by stk reset */
+		gain = <20>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		iovcc-supply = <&reg_mba6ul_3v3>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&lcdif_out {
+	bus-width = <24>;
+};
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 6/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULxL
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
                   ` (4 preceding siblings ...)
  2026-10-02  8:14 ` [PATCH 5/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULx Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02  8:14 ` [PATCH 7/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLx Alexander Stein
  2026-10-02  8:14 ` [PATCH 8/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLxL Alexander Stein
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

This simply reuses the .dtso files from TQMa6ULx.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 3d34af776a5bb..e86b9c1a63005 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -424,6 +424,8 @@ imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx
 imx6ul-tqma6ul2-mba6ulx-cdtech-dc44-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
 imx6ul-tqma6ul2-mba6ulx-cdtech-fc21-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtbo
 imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ul-tqma6ul2l-mba6ulx-cdtech-dc44-dtbs += imx6ul-tqma6ul2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
+imx6ul-tqma6ul2l-mba6ulx-cdtech-fc21-dtbs += imx6ul-tqma6ul2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtbo
 imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 
@@ -431,6 +433,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33.dtb
 
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 7/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLx
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
                   ` (5 preceding siblings ...)
  2026-10-02  8:14 ` [PATCH 6/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULxL Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  2026-10-02  8:14 ` [PATCH 8/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLxL Alexander Stein
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

This simply reuses the .dtso files from TQMa6ULx.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index e86b9c1a63005..5f190900904ab 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -427,6 +427,8 @@ imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ul-tqma6ul2-mba6ulx.dtb im
 imx6ul-tqma6ul2l-mba6ulx-cdtech-dc44-dtbs += imx6ul-tqma6ul2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
 imx6ul-tqma6ul2l-mba6ulx-cdtech-fc21-dtbs += imx6ul-tqma6ul2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtbo
 imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ull-tqma6ull2-mba6ulx-cdtech-dc44-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
+imx6ull-tqma6ull2-mba6ulx-cdtech-fc21-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
 imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
 
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
@@ -436,6 +438,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2l-mba6ulx-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33.dtb
 
 imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 8/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLxL
  2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
                   ` (6 preceding siblings ...)
  2026-10-02  8:14 ` [PATCH 7/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLx Alexander Stein
@ 2026-10-02  8:14 ` Alexander Stein
  7 siblings, 0 replies; 10+ messages in thread
From: Alexander Stein @ 2026-10-02  8:14 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, devicetree, imx, linux-arm-kernel, linux-kernel, linux

This simply reuses the .dtso files from TQMa6ULx.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 5f190900904ab..77b7aa9968c22 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -430,6 +430,8 @@ imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb
 imx6ull-tqma6ull2-mba6ulx-cdtech-dc44-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
 imx6ull-tqma6ull2-mba6ulx-cdtech-fc21-dtbs += imx6ull-tqma6ull2-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
 imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtbo
+imx6ull-tqma6ull2l-mba6ulx-cdtech-dc44-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtbo
+imx6ull-tqma6ull2l-mba6ulx-cdtech-fc21-dtbs += imx6ull-tqma6ull2l-mba6ulx.dtb imx6ul-tqma6ul2-mba6ulx-cdtech-fc21.dtbo
 
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ul-tqma6ul2-mba6ulx-cdtech-dc44.dtb
@@ -441,6 +443,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2-mba6ulx-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += 	imx6ull-tqma6ull2l-mba6ulx-cdtech-fc21.dtb
 
 imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
 	imx7d-colibri-emmc-aster.dtb \
-- 
2.55.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2026-10-02 14:37 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-02  8:14 [PATCH 0/8] Display support for TQMa6UL[L]x Alexander Stein
2026-10-02  8:14 ` [PATCH 1/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULx Alexander Stein
2026-10-02 14:37   ` Frank Li
2026-10-02  8:14 ` [PATCH 2/8] ARM: dts: imx6ul: Add LVDS DT overlay for TQMa6ULxL Alexander Stein
2026-10-02  8:14 ` [PATCH 3/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLx Alexander Stein
2026-10-02  8:14 ` [PATCH 4/8] ARM: dts: imx6ull: Add LVDS DT overlay for TQMa6ULLxL Alexander Stein
2026-10-02  8:14 ` [PATCH 5/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULx Alexander Stein
2026-10-02  8:14 ` [PATCH 6/8] ARM: dts: imx6ul: Add parallel display DT overlay for TQMa6ULxL Alexander Stein
2026-10-02  8:14 ` [PATCH 7/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLx Alexander Stein
2026-10-02  8:14 ` [PATCH 8/8] ARM: dts: imx6ull: Add parallel display DT overlay for TQMa6ULLxL Alexander Stein

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®