From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To: "Benoît Monin" <benoit.monin@bootlin.com>
Cc: "Daniel Lezcano" <daniel.lezcano@kernel.org>,
"Thomas Gleixner" <tglx@kernel.org>,
"Dragan Mladjenovic" <dragan.mladjenovic@syrmia.com>,
"Chao-ying Fu" <cfu@wavecomp.com>,
"Aleksandar Rikalo" <arikalo@gmail.com>,
"Paul Burton" <paulburton@kernel.org>,
"Radu Rendec" <radu@rendec.net>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/5] irqchip/mips-gic: Fix recursive acquisition of gic_lock in gic_set_affinity()
Date: Mon, 28 Sep 2026 10:22:07 +0200 [thread overview]
Message-ID: <arojr46BtH7FEQOS@alpha.franken.de> (raw)
In-Reply-To: <20260907-sync-gic-counters-v3-2-3d891ddabdaf@bootlin.com>
On Mon, Sep 07, 2026 at 02:46:36PM +0200, Benoît Monin wrote:
> Commit 322a90638768 ("irqchip/mips-gic: Multi-cluster support")
> made gic_set_affinity() call gic_set_type() when an interrupt's
> affinity is moved between clusters. gic_set_type() takes gic_lock with
> raw_spin_lock_irqsave(), but gic_set_affinity() holds gic_lock at that
> point, so the same raw spinlock is acquired twice, triggering a deadlock.
>
> Split gic_set_type() into a gic_set_type_locked() helper that assumes
> gic_lock is already held. gic_set_type() takes gic_lock and calls the
> helper, and gic_set_affinity() calls gic_set_type_locked() directly,
> since it already holds gic_lock.
>
> Fixes: 322a90638768 ("irqchip/mips-gic: Multi-cluster support")
> Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
> ---
> drivers/irqchip/irq-mips-gic.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
> index 3b31cbcbed6f..f2ae60d39d66 100644
> --- a/drivers/irqchip/irq-mips-gic.c
> +++ b/drivers/irqchip/irq-mips-gic.c
> @@ -297,14 +297,14 @@ static void gic_ack_irq(struct irq_data *d)
> }
> }
>
> -static int gic_set_type(struct irq_data *d, unsigned int type)
> +static int gic_set_type_locked(struct irq_data *d, unsigned int type)
> {
> unsigned int irq, pol, trig, dual;
> - unsigned long flags;
> +
> + lockdep_assert_held(&gic_lock);
>
> irq = GIC_HWIRQ_TO_SHARED(d->hwirq);
>
> - raw_spin_lock_irqsave(&gic_lock, flags);
> switch (type & IRQ_TYPE_SENSE_MASK) {
> case IRQ_TYPE_EDGE_FALLING:
> pol = GIC_POL_FALLING_EDGE;
> @@ -351,11 +351,16 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
> else
> irq_set_chip_handler_name_locked(d, &gic_level_irq_controller,
> handle_level_irq, NULL);
> - raw_spin_unlock_irqrestore(&gic_lock, flags);
>
> return 0;
> }
>
> +static int gic_set_type(struct irq_data *d, unsigned int type)
> +{
> + guard(raw_spinlock_irqsave)(&gic_lock);
> + return gic_set_type_locked(d, type);
> +}
> +
> #ifdef CONFIG_SMP
> static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
> bool force)
> @@ -407,7 +412,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
> * trigger type in the new cluster.
> */
> if (cl != old_cl)
> - gic_set_type(d, irqd_get_trigger_type(d));
> + gic_set_type_locked(d, irqd_get_trigger_type(d));
>
> /* Route the interrupt to its new VP(E) */
> if (gic_irq_lock_cluster(d)) {
>
> --
> 2.55.0
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
next prev parent reply other threads:[~2026-09-28 8:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 12:46 [PATCH v3 0/5] MIPS: GIC clocksource/irqchip improvements and fixes for multi-cluster systems Benoît Monin
2026-09-07 12:46 ` [PATCH v3 1/5] irqchip/mips-gic: Fix unbalanced cm_core_lock in for_each_online_cpu_gic() Benoît Monin
2026-09-28 8:17 ` Thomas Bogendoerfer
2026-09-07 12:46 ` [PATCH v3 2/5] irqchip/mips-gic: Fix recursive acquisition of gic_lock in gic_set_affinity() Benoît Monin
2026-09-28 8:22 ` Thomas Bogendoerfer [this message]
2026-09-07 12:46 ` [PATCH v3 3/5] irqchip/mips-gic: Enable interrupt when moving affinity across clusters Benoît Monin
2026-09-28 8:35 ` Thomas Bogendoerfer
2026-09-28 13:21 ` Benoît Monin
2026-09-07 12:46 ` [PATCH v3 4/5] clocksource: mips-gic-timer: Simplify gic_next_event() for per-cpu timer Benoît Monin
2026-09-28 9:29 ` Thomas Bogendoerfer
2026-09-07 12:46 ` [PATCH v3 5/5] clocksource: mips-gic-timer: Use local counter on synced multi-cluster systems Benoît Monin
2026-09-28 10:26 ` Thomas Bogendoerfer
2026-09-28 14:56 ` Benoît Monin
2026-09-19 21:26 ` [PATCH v3 0/5] MIPS: GIC clocksource/irqchip improvements and fixes for " Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arojr46BtH7FEQOS@alpha.franken.de \
--to=tsbogend@alpha.franken.de \
--cc=arikalo@gmail.com \
--cc=benoit.monin@bootlin.com \
--cc=cfu@wavecomp.com \
--cc=daniel.lezcano@kernel.org \
--cc=dragan.mladjenovic@syrmia.com \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=radu@rendec.net \
--cc=tawfik.bayouk@mobileye.com \
--cc=tglx@kernel.org \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®