From: Frank Li <Frank.li@oss.nxp.com>
To: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Frank Li <Frank.Li@nxp.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Loic Poulain <loic.poulain@oss.qualcomm.com>,
linux-media@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v4 07/11] media: imx8-isi: Select MSB-aligned RAW input from pixel link on i.MX95
Date: Tue, 29 Sep 2026 09:31:32 -0500 [thread overview]
Message-ID: <arvLxIDg9Z85BQL9@SMW015318> (raw)
In-Reply-To: <20260929-isi_imx952-v4-7-e69f89c7c651@oss.nxp.com>
On Tue, Sep 29, 2026 at 04:52:28PM +0800, Guoniu Zhou wrote:
> The ISI receives RAW data from the Pixel Link, whose alignment is
> determined by the SoC integration. Before i.MX93, the Pixel Link
> provides LSB-aligned RAW data to the ISI. Starting with i.MX93, both
> LSB and MSB alignment are supported and can be selected via
> CHNL_CTRL_RAW_IN_MSB_ALIGN, with the default keeping LSB alignment
> for backward compatibility. From i.MX95 onwards, the CSI formatter
> replaces the gasket and only provides MSB-aligned RAW data.
>
> Set CHNL_CTRL_RAW_IN_MSB_ALIGN on i.MX95 so the ISI selects RAW
> samples from the high bits of the Pixel Link bus.
>
> Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
> ---
> Changes in v4:
> - New patch
> ---
> drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c | 20 ++++++++++++++++++++
> drivers/media/platform/nxp/imx8-isi/imx8-isi-regs.h | 1 +
> 2 files changed, 21 insertions(+)
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> index cc52a90c2477..b3f32b9796d5 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> @@ -303,6 +303,22 @@ static void mxc_isi_channel_set_panic_threshold(struct mxc_isi_pipe *pipe)
> mxc_isi_write(pipe, CHNL_OUT_BUF_CTRL, val);
> }
>
> +/*
> + * The ISI receives RAW data from the Pixel Link, whose alignment is
> + * determined by the SoC integration. It originally selected RAW samples
> + * from the low bits of the Pixel Link bus. Starting with i.MX93,
> + * CHNL_CTRL_RAW_IN_MSB_ALIGN was introduced to allow the ISI to select
> + * RAW samples from either the high or low bits, as both LSB and MSB
> + * alignment can be selected in the gasket.
> + *
> + * On i.MX95, the CSI formatter provides MSB-aligned RAW data, so the ISI
> + * must select RAW samples from the high bits of the Pixel Link bus.
> + */
> +static bool isi_raw_in_msb(const struct mxc_isi_plat_data *pdata)
> +{
> + return pdata->model == MXC_ISI_IMX95;
Can you add bool in plat_data to avoid check model? In case future other
chip also use msb and complex check logic here.
Frank
> +}
> +
> static void mxc_isi_channel_set_control(struct mxc_isi_pipe *pipe,
> enum mxc_isi_input_id input,
> unsigned int vc,
> @@ -357,6 +373,10 @@ static void mxc_isi_channel_set_control(struct mxc_isi_pipe *pipe,
> val |= CHNL_CTRL_VC_ID_1(vc >> 2);
> }
>
> + /* Select MSB-aligned RAW data from the Pixel Link when needed. */
> + if (isi_raw_in_msb(pipe->isi->pdata))
> + val |= CHNL_CTRL_RAW_IN_MSB_ALIGN;
> +
> mxc_isi_write(pipe, CHNL_CTRL, val);
>
> mutex_unlock(&pipe->lock);
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-regs.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-regs.h
> index 5f66b7c9cd1c..35438abf3172 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-regs.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-regs.h
> @@ -20,6 +20,7 @@
> #define CHNL_CTRL_CHAIN_BUF_NO_CHAIN 0
> #define CHNL_CTRL_CHAIN_BUF_2_CHAIN 1
> #define CHNL_CTRL_SW_RST BIT(24)
> +#define CHNL_CTRL_RAW_IN_MSB_ALIGN BIT(22) /* i.MX{91,93,95} */
> /*
> * CHNL_CTRL_BLANK_PXL: i.MX8{QM,QXP} only
> * CHNL_CTRL_VC_ID_1, CHNL_CTRL_VC_ID_1_MASK: i.MX95 only
>
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2026-09-29 14:31 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 8:52 [PATCH v4 00/11] media: imx8-isi: Add i.MX952 ISI support Guoniu Zhou
2026-09-29 8:52 ` [PATCH v4 01/11] media: imx8-isi: Reorder mxc_imx95_data to follow mxc_imx93_data Guoniu Zhou
2026-09-29 8:52 ` [PATCH v4 02/11] media: imx8-isi: Extend output format mask to 7 bits Guoniu Zhou
2026-09-29 14:20 ` Frank Li
2026-09-29 8:52 ` [PATCH v4 03/11] media: imx8-isi: Support mbus_code filtering in format enumeration Guoniu Zhou
2026-09-29 14:22 ` Frank Li
2026-09-29 8:52 ` [PATCH v4 04/11] media: imx8-isi: Reuse mxc_isi_format_enum() in capture " Guoniu Zhou
2026-09-29 14:23 ` Frank Li
2026-09-29 8:52 ` [PATCH v4 05/11] media: imx8-isi: Apply RAW output format workaround at runtime Guoniu Zhou
2026-09-29 14:26 ` Frank Li
2026-09-29 8:52 ` [PATCH v4 06/11] media: imx8-isi: Add RAW14 output format support Guoniu Zhou
2026-09-29 14:28 ` Frank Li
2026-09-29 8:52 ` [PATCH v4 07/11] media: imx8-isi: Select MSB-aligned RAW input from pixel link on i.MX95 Guoniu Zhou
2026-09-29 14:31 ` Frank Li [this message]
2026-09-30 2:39 ` G.N. Zhou (OSS)
2026-09-29 8:52 ` [PATCH v4 08/11] media: imx8-isi: Exclude RAW10/12/14 output formats " Guoniu Zhou
2026-09-29 14:33 ` Frank Li
2026-09-29 8:52 ` [PATCH v4 09/11] media: dt-bindings: nxp,imx8-isi: Add i.MX952 ISI compatible string Guoniu Zhou
2026-09-29 8:52 ` [PATCH v4 10/11] media: imx8-isi: Add i.MX952 ISI support Guoniu Zhou
2026-09-29 8:52 ` [PATCH v4 11/11] media: imx8-isi: Enable RAW10/12/14 output LSB alignment on i.MX952 Guoniu Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arvLxIDg9Z85BQL9@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=guoniu.zhou@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®