From: Pedro Falcato <pfalcato@suse.de>
To: Shivank Garg <shivankg@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@kernel.org>,
Lorenzo Stoakes <ljs@kernel.org>,
"Liam R. Howlett" <liam@infradead.org>,
Vlastimil Babka <vbabka@kernel.org>,
Mike Rapoport <rppt@kernel.org>,
Suren Baghdasaryan <surenb@google.com>,
Michal Hocko <mhocko@suse.com>, Borislav Petkov <bp@alien8.de>,
Ankur Arora <ankur.a.arora@oracle.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Thomas Gleixner <tglx@kernel.org>,
Bharata B Rao <bharata@amd.com>,
Hrushikesh Salunke <hsalunke@amd.com>,
Ingo Molnar <mingo@redhat.com>,
"H . Peter Anvin" <hpa@zytor.com>,
David Laight <david.laight.linux@gmail.com>,
David Rientjes <rientjes@google.com>,
Linus Torvalds <torvalds@linuxfoundation.org>,
Teja Vojjala <tejavojjala@google.com>,
Huan Nguyen <nhuhuan@google.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
x86@kernel.org
Subject: Re: [PATCH RFC v2] mm: introduce copy_mc_highpages() and batch copy in folio_mc_copy()
Date: Mon, 19 Oct 2026 12:09:20 +0100 [thread overview]
Message-ID: <atX3lpXQBHH1JPhW@pedro-suse.tail5790ac.ts.net> (raw)
In-Reply-To: <20261019-batpagecopy-v2-1-d75e7d0dfaae@amd.com>
On Mon, Oct 19, 2026 at 10:06:49AM +0000, Shivank Garg wrote:
> folio_mc_copy() copies a folio one page at a time with copy_mc_highpage(),
> so a 2MB folio makes 512 separate copy_mc_to_kernel() calls. Each page
> pays the startup cost of the string instruction ("REP; MOVSB" on x86
> CPUs with ERMS) plus a cond_resched().
>
> Introduce copy_mc_highpages(), the page range variant of
> copy_mc_highpage(). When copy_mc_to_kernel() is available and the pages
> are in the linear map, copy the whole range with a single
> copy_mc_to_kernel() call, so the CPU can optimize for the larger extent.
> Otherwise, fall back to copy_mc_highpage() one page at a time.
>
> On a machine check, queue the poisoned source page for memory_failure()
> and return -EHWPOISON, as copy_mc_highpage() does.
>
> copy_mc_to_kernel() cannot reschedule, so copying a large folio with one
> call can run for a long time under cooperative preemption models. Add
Do we care, though? I think most architectures are full preempt/preempt lazy
at this point? Is PREEMPT_DYNAMIC the only showstopper?
> COPY_MC_PAGES_NON_PREEMPT_BATCH to bound how much is copied in one go:
> 32MB, the same bound clear_pages() gets from
> PROCESS_PAGES_NON_PREEMPT_BATCH, or one page on the fallback path.
>
> Switch folio_mc_copy() to copy_mc_highpages(): the whole folio at once
> under preemptible models, COPY_MC_PAGES_NON_PREEMPT_BATCH pages at a time
> otherwise.
>
> Assisted-by: LLM
> Signed-off-by: Shivank Garg <shivankg@amd.com>
> ---
> On a Zen 6 system with CXL memory, move_pages() gets ~1.4x faster for
> 2MB THPs and up to ~2.8x faster for 1GB hugetlb pages (numbers below).
> When demoting to CXL, kswapd uses ~31% less CPU per GB demoted.
>
> Changes in v2:
> - Drop the folio_copy() changes as there is little to gain here.
> On architectures without copy_mc_to_kernel(), copy_mc_highpages()
> falls back to the per-page copy_mc_highpage(), which ends up in
> copy_highpage(). A batched copy_highpages() could help there too,
> but I haven't tested it on those architectures, so that is left for
> a follow-up.
> - Add COPY_MC_PAGES_NON_PREEMPT_BATCH to limit how much is copied
> between cond_resched() calls on non-preemptible kernels.
> - Rebase onto mm-new (2887e63d2e8e).
> - v1: https://lore.kernel.org/all/20260427142036.111940-2-shivankg@amd.com
>
> Test setup: AMD EPYC Zen 6, single socket, NPS2 (nodes 0 and 1 are
> DRAM, node 2 is CXL), with and without this patch.
>
> move_pages() throughput
> -----------------------
> A single move_pages() call migrates 1GB of anonymous memory, as 512
> 2MB THPs or as four 1GB hugetlb pages. Mean ± stddev (10 runs each),
> in GiB/s:
>
> 2MB THP:
> direction base patched speedup
> DRAM0 -> DRAM1 19.57 ± 0.17 27.51 ± 0.78 1.41x
> DRAM1 -> DRAM0 19.44 ± 0.12 27.33 ± 0.27 1.41x
> DRAM0 -> CXL 18.66 ± 0.18 26.90 ± 0.51 1.44x
> CXL -> DRAM0 15.38 ± 0.59 16.60 ± 0.24 1.08x
>
> 1GB hugetlb:
> direction base patched speedup
> DRAM0 -> DRAM1 20.34 ± 0.13 53.88 ± 1.48 2.65x
> DRAM1 -> DRAM0 19.10 ± 2.65 53.78 ± 0.55 2.82x
> DRAM0 -> CXL 19.53 ± 0.08 44.10 ± 0.19 2.26x
> CXL -> DRAM0 16.41 ± 0.07 20.89 ± 0.06 1.27x
>
> kswapd demotion
> ---------------
> Node 0 is limited to 16GB of free memory and demotion is enabled. A
> single thread bound to node 0 writes 96GB of anonymous THP memory, so
> ~80GB has to be demoted to CXL. Median of 10 runs:
>
> base patched
> kswapd CPU time 4.25 s 3.44 s (-19%)
> kswapd CPU per GB demoted 63.6 ms 44.1 ms (-31%)
> demoted by direct reclaim 14.1 GB 0.46 GB
> allocstall 7427 370
>
> With the patch, kswapd keeps up with the writer, so the writer rarely
> falls back to direct reclaim.
>
> Other workloads
> ---------------
> - Memory tiering (numa_balancing=2) with Redis, GAPBS PR/BC, a B-tree
> benchmark and Graph500: copying 2MB folios during demotion is
> 1.18-1.49x faster.
> - A userspace daemon moving 1GB hugetlb pages between DRAM and CXL
> with move_pages() while GUPS runs on them: demotion is 1.43x faster
> and promotion 1.28x faster.
> ---
> include/linux/highmem.h | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
> mm/util.c | 18 +++++++++++----
> 2 files changed, 73 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/highmem.h b/include/linux/highmem.h
> index d7aac9de1c8a..e43459dc58b0 100644
> --- a/include/linux/highmem.h
> +++ b/include/linux/highmem.h
> @@ -484,6 +484,65 @@ static inline int copy_mc_highpage(struct page *to, struct page *from)
> }
> #endif
>
> +#if defined(copy_mc_to_kernel) && !defined(CONFIG_HIGHMEM) && \
> + !defined(__HAVE_ARCH_COPY_HIGHPAGE)
> +/*
> + * copy_mc_highpages() copies the whole range with a single
> + * copy_mc_to_kernel() call, which cannot reschedule. That is fine under
> + * preemptible models, but under cooperatively scheduled models callers
> + * should copy at most COPY_MC_PAGES_NON_PREEMPT_BATCH pages at a time.
> + *
> + * With a value of 32MB and assuming a memory bandwidth of ~10GBps, this
> + * should result in a worst case preemption latency of around 3ms when
> + * copying pages.
> + */
This worst-case is absolutely terrible :)
> +#define COPY_MC_PAGES_NON_PREEMPT_BATCH (SZ_32M >> PAGE_SHIFT)
> +
> +/**
> + * copy_mc_highpages() - copy a page range with machine check handling
> + * @to: first destination page
> + * @from: first source page
> + * @nr_pages: number of pages
> + *
> + * Range variant of copy_mc_highpage(). On a machine check, the poisoned
> + * source page is queued for memory_failure().
> + *
> + * Does not call cond_resched(). Under cooperatively scheduled models the
> + * caller is expected to limit @nr_pages to COPY_MC_PAGES_NON_PREEMPT_BATCH.
This is very backwards, callers shouldn't need to check this.
> + *
> + * Return: 0 on success, -EHWPOISON if a machine check was handled.
> + */
> +static inline int copy_mc_highpages(struct page *to, struct page *from,
> + unsigned long nr_pages)
> +{
> + unsigned long len = nr_pages << PAGE_SHIFT;
> + unsigned long ret, i;
> +
> + ret = copy_mc_to_kernel(page_address(to), page_address(from), len);
> + if (!ret) {
> + for (i = 0; i < nr_pages; i++)
> + kmsan_copy_page_meta(to + i, from + i);
> + return 0;
> + }
> + memory_failure_queue(page_to_pfn(from) + ((len - ret) >> PAGE_SHIFT), 0);
> + return -EHWPOISON;
These codepaths look strangely inverted, it would be more natural if you did:
if (ret) {
memory_failure_queue(page_to_pfn(from) + ((len - ret) >> PAGE_SHIFT), 0);
return -EWPOISON;
}
for (i = 0; i < nr_pages; i++)
kmsan_copy_page_meta(to + i, from + i);
/* Or, ideally, kmsan_copy_pages_meta(to, from, nr_pages); */
return 0;
}
in my opinion.
> +}
> +#else
> +
> +#define COPY_MC_PAGES_NON_PREEMPT_BATCH 1
I would suggest that perhaps this should be the fallback for non-preemptible
models. But it gets a little weird with PREEMPT_DYNAMIC I think?
> +
> +static inline int copy_mc_highpages(struct page *to, struct page *from,
> + unsigned long nr_pages)
> +{
> + unsigned long i;
> +
> + for (i = 0; i < nr_pages; i++)
> + if (copy_mc_highpage(to + i, from + i))
> + return -EHWPOISON;
> + return 0;
> +}
> +#endif
> +
> static inline void memcpy_page(struct page *dst_page, size_t dst_off,
> struct page *src_page, size_t src_off,
> size_t len)
> diff --git a/mm/util.c b/mm/util.c
> index 7f374bb8bf36..5015cfdfeaa5 100644
> --- a/mm/util.c
> +++ b/mm/util.c
> @@ -763,13 +763,23 @@ EXPORT_SYMBOL(folio_copy);
>
> int folio_mc_copy(struct folio *dst, struct folio *src)
> {
> - long nr = folio_nr_pages(src);
> - long i = 0;
> + const unsigned long nr_pages = folio_nr_pages(src);
> + /*
> + * Copy the largest extent possible to allow for architecture specific
> + * extent based optimizations. copy_mc_highpages() does not call
> + * cond_resched(), so limit the unit size when running under
> + * non-preemptible scheduling models.
> + */
> + const unsigned long unit = preempt_model_preemptible() ?
> + nr_pages : COPY_MC_PAGES_NON_PREEMPT_BATCH;
See? now mm is aware of preemption models! eww!
--
Pedro
next prev parent reply other threads:[~2026-10-19 11:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 10:06 Shivank Garg
2026-10-19 11:09 ` Pedro Falcato [this message]
2026-10-19 12:23 ` David Hildenbrand (Arm)
2026-10-19 13:10 ` Garg, Shivank
2026-10-19 14:21 ` David Hildenbrand (Arm)
2026-10-19 17:32 ` Garg, Shivank
2026-10-19 13:16 ` Garg, Shivank
2026-10-19 12:19 ` David Laight
2026-10-19 18:54 ` Garg, Shivank
2026-10-19 20:52 ` David Laight
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=atX3lpXQBHH1JPhW@pedro-suse.tail5790ac.ts.net \
--to=pfalcato@suse.de \
--cc=akpm@linux-foundation.org \
--cc=ankur.a.arora@oracle.com \
--cc=bharata@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=david.laight.linux@gmail.com \
--cc=david@kernel.org \
--cc=hpa@zytor.com \
--cc=hsalunke@amd.com \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mingo@redhat.com \
--cc=nhuhuan@google.com \
--cc=rientjes@google.com \
--cc=rppt@kernel.org \
--cc=shivankg@amd.com \
--cc=surenb@google.com \
--cc=tejavojjala@google.com \
--cc=tglx@kernel.org \
--cc=torvalds@linuxfoundation.org \
--cc=vbabka@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®