From: "Garg, Shivank" <shivankg@amd.com>
To: "pfalcato@suse.de" <pfalcato@suse.de>
Cc: "tejavojjala@google.com" <tejavojjala@google.com>,
"Rao, Bharata Bhasker" <bharata@amd.com>,
"rppt@kernel.org" <rppt@kernel.org>,
"david.laight.linux@gmail.com" <david.laight.linux@gmail.com>,
"ankur.a.arora@oracle.com" <ankur.a.arora@oracle.com>,
"dave.hansen@linux.intel.com" <dave.hansen@linux.intel.com>,
"vbabka@kernel.org" <vbabka@kernel.org>,
"akpm@linux-foundation.org" <akpm@linux-foundation.org>,
"david@kernel.org" <david@kernel.org>,
"mingo@redhat.com" <mingo@redhat.com>,
"surenb@google.com" <surenb@google.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-mm@kvack.org" <linux-mm@kvack.org>,
"nhuhuan@google.com" <nhuhuan@google.com>,
"hpa@zytor.com" <hpa@zytor.com>,
"tglx@kernel.org" <tglx@kernel.org>,
"liam@infradead.org" <liam@infradead.org>,
"Salunke, Hrushikesh" <Hrushikesh.Salunke@amd.com>,
"bp@alien8.de" <bp@alien8.de>,
"mhocko@suse.com" <mhocko@suse.com>,
"ljs@kernel.org" <ljs@kernel.org>,
"rientjes@google.com" <rientjes@google.com>,
"torvalds@linuxfoundation.org" <torvalds@linuxfoundation.org>,
"x86@kernel.org" <x86@kernel.org>
Subject: Re: [PATCH RFC v2] mm: introduce copy_mc_highpages() and batch copy in folio_mc_copy()
Date: Mon, 19 Oct 2026 13:16:17 +0000 [thread overview]
Message-ID: <c9e11ad7718022c83846f69c6f05b209b1cc51fa.camel@amd.com> (raw)
In-Reply-To: <atX3lpXQBHH1JPhW@pedro-suse.tail5790ac.ts.net>
On Mon, 2026-10-19 at 12:09 +0100, Pedro Falcato wrote:
> On Mon, Oct 19, 2026 at 10:06:49AM +0000, Shivank Garg wrote:
> > folio_mc_copy() copies a folio one page at a time with copy_mc_highpage(),
> > so a 2MB folio makes 512 separate copy_mc_to_kernel() calls. Each page
> > pays the startup cost of the string instruction ("REP; MOVSB" on x86
> > CPUs with ERMS) plus a cond_resched().
> >
> > Introduce copy_mc_highpages(), the page range variant of
> > copy_mc_highpage(). When copy_mc_to_kernel() is available and the pages
> > are in the linear map, copy the whole range with a single
> > copy_mc_to_kernel() call, so the CPU can optimize for the larger extent.
> > Otherwise, fall back to copy_mc_highpage() one page at a time.
> >
> > On a machine check, queue the poisoned source page for memory_failure()
> > and return -EHWPOISON, as copy_mc_highpage() does.
> >
> > copy_mc_to_kernel() cannot reschedule, so copying a large folio with one
> > call can run for a long time under cooperative preemption models. Add
>
> Do we care, though? I think most architectures are full preempt/preempt lazy
> at this point? Is PREEMPT_DYNAMIC the only showstopper?
yes, and Since 7dadeaa6e851 ("sched: Further restrict the preemption
modes"),
PREEMPT_DYNAMIC is not problem either.
>
> > COPY_MC_PAGES_NON_PREEMPT_BATCH to bound how much is copied in one go:
> > 32MB, the same bound clear_pages() gets from
> > PROCESS_PAGES_NON_PREEMPT_BATCH, or one page on the fallback path.
> >
> > Switch folio_mc_copy() to copy_mc_highpages(): the whole folio at once
> > under preemptible models, COPY_MC_PAGES_NON_PREEMPT_BATCH pages at a time
> > otherwise.
> >
> > Assisted-by: LLM
> > Signed-off-by: Shivank Garg <shivankg@amd.com>
> > ---
> > On a Zen 6 system with CXL memory, move_pages() gets ~1.4x faster for
> > 2MB THPs and up to ~2.8x faster for 1GB hugetlb pages (numbers below).
> > When demoting to CXL, kswapd uses ~31% less CPU per GB demoted.
> >
> > Changes in v2:
> > - Drop the folio_copy() changes as there is little to gain here.
> > On architectures without copy_mc_to_kernel(), copy_mc_highpages()
> > falls back to the per-page copy_mc_highpage(), which ends up in
> > copy_highpage(). A batched copy_highpages() could help there too,
> > but I haven't tested it on those architectures, so that is left for
> > a follow-up.
> > - Add COPY_MC_PAGES_NON_PREEMPT_BATCH to limit how much is copied
> > between cond_resched() calls on non-preemptible kernels.
> > - Rebase onto mm-new (2887e63d2e8e).
> > - v1: https://lore.kernel.org/all/20260427142036.111940-2-shivankg@amd.com
> >
> > Test setup: AMD EPYC Zen 6, single socket, NPS2 (nodes 0 and 1 are
> > DRAM, node 2 is CXL), with and without this patch.
> >
> > move_pages() throughput
> > -----------------------
> > A single move_pages() call migrates 1GB of anonymous memory, as 512
> > 2MB THPs or as four 1GB hugetlb pages. Mean ± stddev (10 runs each),
> > in GiB/s:
> >
> > 2MB THP:
> > direction base patched speedup
> > DRAM0 -> DRAM1 19.57 ± 0.17 27.51 ± 0.78 1.41x
> > DRAM1 -> DRAM0 19.44 ± 0.12 27.33 ± 0.27 1.41x
> > DRAM0 -> CXL 18.66 ± 0.18 26.90 ± 0.51 1.44x
> > CXL -> DRAM0 15.38 ± 0.59 16.60 ± 0.24 1.08x
> >
> > 1GB hugetlb:
> > direction base patched speedup
> > DRAM0 -> DRAM1 20.34 ± 0.13 53.88 ± 1.48 2.65x
> > DRAM1 -> DRAM0 19.10 ± 2.65 53.78 ± 0.55 2.82x
> > DRAM0 -> CXL 19.53 ± 0.08 44.10 ± 0.19 2.26x
> > CXL -> DRAM0 16.41 ± 0.07 20.89 ± 0.06 1.27x
> >
> > kswapd demotion
> > ---------------
> > Node 0 is limited to 16GB of free memory and demotion is enabled. A
> > single thread bound to node 0 writes 96GB of anonymous THP memory, so
> > ~80GB has to be demoted to CXL. Median of 10 runs:
> >
> > base patched
> > kswapd CPU time 4.25 s 3.44 s (-19%)
> > kswapd CPU per GB demoted 63.6 ms 44.1 ms (-31%)
> > demoted by direct reclaim 14.1 GB 0.46 GB
> > allocstall 7427 370
> >
> > With the patch, kswapd keeps up with the writer, so the writer rarely
> > falls back to direct reclaim.
> >
> > Other workloads
> > ---------------
> > - Memory tiering (numa_balancing=2) with Redis, GAPBS PR/BC, a B-tree
> > benchmark and Graph500: copying 2MB folios during demotion is
> > 1.18-1.49x faster.
> > - A userspace daemon moving 1GB hugetlb pages between DRAM and CXL
> > with move_pages() while GUPS runs on them: demotion is 1.43x faster
> > and promotion 1.28x faster.
> > ---
> > include/linux/highmem.h | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
> > mm/util.c | 18 +++++++++++----
> > 2 files changed, 73 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/linux/highmem.h b/include/linux/highmem.h
> > index d7aac9de1c8a..e43459dc58b0 100644
> > --- a/include/linux/highmem.h
> > +++ b/include/linux/highmem.h
> > @@ -484,6 +484,65 @@ static inline int copy_mc_highpage(struct page *to, struct page *from)
> > }
> > #endif
> >
> > +#if defined(copy_mc_to_kernel) && !defined(CONFIG_HIGHMEM) && \
> > + !defined(__HAVE_ARCH_COPY_HIGHPAGE)
> > +/*
> > + * copy_mc_highpages() copies the whole range with a single
> > + * copy_mc_to_kernel() call, which cannot reschedule. That is fine under
> > + * preemptible models, but under cooperatively scheduled models callers
> > + * should copy at most COPY_MC_PAGES_NON_PREEMPT_BATCH pages at a time.
> > + *
> > + * With a value of 32MB and assuming a memory bandwidth of ~10GBps, this
> > + * should result in a worst case preemption latency of around 3ms when
> > + * copying pages.
> > + */
>
> This worst-case is absolutely terrible :)
>
> > +#define COPY_MC_PAGES_NON_PREEMPT_BATCH (SZ_32M >> PAGE_SHIFT)
> > +
> > +/**
> > + * copy_mc_highpages() - copy a page range with machine check handling
> > + * @to: first destination page
> > + * @from: first source page
> > + * @nr_pages: number of pages
> > + *
> > + * Range variant of copy_mc_highpage(). On a machine check, the poisoned
> > + * source page is queued for memory_failure().
> > + *
> > + * Does not call cond_resched(). Under cooperatively scheduled models the
> > + * caller is expected to limit @nr_pages to COPY_MC_PAGES_NON_PREEMPT_BATCH.
>
> This is very backwards, callers shouldn't need to check this.
>
> > + *
> > + * Return: 0 on success, -EHWPOISON if a machine check was handled.
> > + */
> > +static inline int copy_mc_highpages(struct page *to, struct page *from,
> > + unsigned long nr_pages)
> > +{
> > + unsigned long len = nr_pages << PAGE_SHIFT;
> > + unsigned long ret, i;
> > +
> > + ret = copy_mc_to_kernel(page_address(to), page_address(from), len);
> > + if (!ret) {
> > + for (i = 0; i < nr_pages; i++)
> > + kmsan_copy_page_meta(to + i, from + i);
> > + return 0;
> > + }
> > + memory_failure_queue(page_to_pfn(from) + ((len - ret) >> PAGE_SHIFT), 0);
> > + return -EHWPOISON;
>
> These codepaths look strangely inverted, it would be more natural if you did:
>
> if (ret) {
> memory_failure_queue(page_to_pfn(from) + ((len - ret) >> PAGE_SHIFT), 0);
> return -EWPOISON;
> }
> for (i = 0; i < nr_pages; i++)
> kmsan_copy_page_meta(to + i, from + i);
Will do this way.
> /* Or, ideally, kmsan_copy_pages_meta(to, from, nr_pages); */
There is no kmsan_copy_pages_meta, I prefer to keep the loop instead of
introducing new wrapper for this single instance.
> return 0;
> }
>
> in my opinion.
>
> > +}
> > +#else
> > +
> > +#define COPY_MC_PAGES_NON_PREEMPT_BATCH 1
>
> I would suggest that perhaps this should be the fallback for non-preemptible
> models. But it gets a little weird with PREEMPT_DYNAMIC I think?
>
> > +
> > +static inline int copy_mc_highpages(struct page *to, struct page *from,
> > + unsigned long nr_pages)
> > +{
> > + unsigned long i;
> > +
> > + for (i = 0; i < nr_pages; i++)
> > + if (copy_mc_highpage(to + i, from + i))
> > + return -EHWPOISON;
> > + return 0;
> > +}
> > +#endif
> > +
> > static inline void memcpy_page(struct page *dst_page, size_t dst_off,
> > struct page *src_page, size_t src_off,
> > size_t len)
> > diff --git a/mm/util.c b/mm/util.c
> > index 7f374bb8bf36..5015cfdfeaa5 100644
> > --- a/mm/util.c
> > +++ b/mm/util.c
> > @@ -763,13 +763,23 @@ EXPORT_SYMBOL(folio_copy);
> >
> > int folio_mc_copy(struct folio *dst, struct folio *src)
> > {
> > - long nr = folio_nr_pages(src);
> > - long i = 0;
> > + const unsigned long nr_pages = folio_nr_pages(src);
> > + /*
> > + * Copy the largest extent possible to allow for architecture specific
> > + * extent based optimizations. copy_mc_highpages() does not call
> > + * cond_resched(), so limit the unit size when running under
> > + * non-preemptible scheduling models.
> > + */
> > + const unsigned long unit = preempt_model_preemptible() ?
> > + nr_pages : COPY_MC_PAGES_NON_PREEMPT_BATCH;
>
> See? now mm is aware of preemption models! eww!
>
> --
> Pedro
next prev parent reply other threads:[~2026-10-19 13:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 10:06 Shivank Garg
2026-10-19 11:09 ` Pedro Falcato
2026-10-19 12:23 ` David Hildenbrand (Arm)
2026-10-19 13:10 ` Garg, Shivank
2026-10-19 14:21 ` David Hildenbrand (Arm)
2026-10-19 17:32 ` Garg, Shivank
2026-10-19 13:16 ` Garg, Shivank [this message]
2026-10-19 12:19 ` David Laight
2026-10-19 18:54 ` Garg, Shivank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c9e11ad7718022c83846f69c6f05b209b1cc51fa.camel@amd.com \
--to=shivankg@amd.com \
--cc=Hrushikesh.Salunke@amd.com \
--cc=akpm@linux-foundation.org \
--cc=ankur.a.arora@oracle.com \
--cc=bharata@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=david.laight.linux@gmail.com \
--cc=david@kernel.org \
--cc=hpa@zytor.com \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mingo@redhat.com \
--cc=nhuhuan@google.com \
--cc=pfalcato@suse.de \
--cc=rientjes@google.com \
--cc=rppt@kernel.org \
--cc=surenb@google.com \
--cc=tejavojjala@google.com \
--cc=tglx@kernel.org \
--cc=torvalds@linuxfoundation.org \
--cc=vbabka@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®