From: Frank Li <Frank.li@oss.nxp.com>
To: Koichiro Den <den@valinux.co.jp>
Cc: "Frank Li" <Frank.Li@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Jon Mason" <jdmason@kudzu.us>,
"Dave Jiang" <dave.jiang@intel.com>,
"Allen Hubbe" <allenbh@gmail.com>,
"Niklas Cassel" <cassel@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Randy Dunlap" <rdunlap@infradead.org>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Jerome Brunet" <jbrunet@baylibre.com>,
linux-pci@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, ntb@lists.linux.dev
Subject: Re: [PATCH v7 06/10] PCI: endpoint: pci-epf-vntb: Allow DMA and MW to share a BAR
Date: Wed, 21 Oct 2026 10:52:32 -0500 [thread overview]
Message-ID: <atjfwC1LTX3L6ncV@SMW015318> (raw)
In-Reply-To: <20261021042229.2280937-7-den@valinux.co.jp>
On Wed, Oct 21, 2026 at 01:22:25PM +0900, Koichiro Den wrote:
> Some endpoint configurations have no spare BAR for DMA resources. Allow
> dma_bar to select an MW BAR and place the DMA ranges after that MW.
>
> DMA submaps have fixed BAR offsets, so a shared MW translation must
> cover its configured size. Report that size as the translation alignment
> and require it to be a power of two.
>
> Older hosts treat the whole BAR as an MW. Require the host to advertise
> MW/DMA boundary support in LINK_UP before enabling a shared-BAR link.
>
> Signed-off-by: Koichiro Den <den@valinux.co.jp>
> ---
> Changes since v6:
> - Split out the host-side changes. (Frank)
> - Require MW/DMA BAR boundary support in LINK_UP for shared BARs.
>
> drivers/pci/endpoint/functions/pci-epf-vntb.c | 154 ++++++++++++++----
> include/linux/pci-epf-ntb.h | 3 +
> 2 files changed, 122 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index ac83af54122f..721cd841a1dd 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -84,12 +84,13 @@ enum epf_irq_slot {
> #define MIN_DB_COUNT (EPF_IRQ_DB_START + 1)
>
> struct epf_ntb_dma {
> + struct mutex lock; /* Serialize DMA submap and MW updates */
> struct epf_ntb_dma_ctrl ctrl;
> struct dma_chan *dchan[EDMA_MAX_RD_CH];
> void *bar_scratch;
> dma_addr_t bar_scratch_phys;
> size_t bar_scratch_size;
> - struct pci_epf_bar_submap submap[EDMA_MAX_RD_CH + 2];
> + struct pci_epf_bar_submap submap[EDMA_MAX_RD_CH + 3];
> struct pci_epf_bar_submap *reg_submap;
> unsigned int num_submap;
> u16 rd_ch_cnt;
> @@ -229,6 +230,22 @@ static bool epf_ntb_is_bar_used(struct epf_ntb *ntb,
> return false;
> }
>
> +static u64 epf_ntb_dma_bar_offset(struct epf_ntb *ntb, enum pci_barno barno)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ntb->num_mws; i++)
> + if (ntb->epf_ntb_bar[BAR_MW1 + i] == barno)
> + return ntb->mws_size[i];
> +
> + return 0;
> +}
> +
> +static bool epf_ntb_dma_shares_bar(struct epf_ntb *ntb, enum pci_barno barno)
> +{
> + return ntb->dma && ntb->epf_ntb_bar[BAR_DMA] == barno;
> +}
> +
> struct epf_ntb_dma_filter {
> struct device *dev;
> int chan_id;
> @@ -353,6 +370,7 @@ static int epf_ntb_dw_edma_collect(struct epf_ntb *ntb,
> unsigned int i;
> size_t align;
> u32 next = 0;
> + u64 offset;
> int ret;
>
> if (ctrl->u.dma_ctrl.reg_layout_data != EDMA_MF_EDMA_UNROLL)
> @@ -371,9 +389,30 @@ static int epf_ntb_dw_edma_collect(struct epf_ntb *ntb,
> if (!is_power_of_2(align))
> return -EINVAL;
>
> - if (epf_ntb_is_bar_used(ntb, barno) ||
> - pci_epc_get_next_free_bar(features, barno) != barno)
> + if (barno == ntb->epf_ntb_bar[BAR_CONFIG] ||
> + barno == ntb->epf_ntb_bar[BAR_DB])
> + return -EINVAL;
> +
> + offset = epf_ntb_dma_bar_offset(ntb, barno);
> + if (!offset &&
> + (epf_ntb_is_bar_used(ntb, barno) ||
> + pci_epc_get_next_free_bar(features, barno) != barno))
> + return -EINVAL;
> + if (offset > U32_MAX)
> + return -EOVERFLOW;
> + if (offset && !is_power_of_2(offset))
> return -EINVAL;
> + dma->ctrl.submap.offset = offset;
> + next = offset;
> + if (next) {
> + /*
> + * submap[0] covers the MW prefix. Keep its temporary
> + * target at address 0 until the MW translation is
> + * installed.
> + */
> + dma->submap[0].size = next;
> + dma->num_submap = 1;
> + }
>
> dma->ctrl.magic = EPF_NTB_DMA_MAGIC;
> dma->ctrl.revision = EPF_NTB_DMA_REVISION;
> @@ -408,7 +447,7 @@ static int epf_ntb_dw_edma_collect(struct epf_ntb *ntb,
> chan->desc_addr_lo = lower_32_bits(dma_addr);
> chan->desc_addr_hi = upper_32_bits(dma_addr);
> }
> - dma->ctrl.submap.size = next;
> + dma->ctrl.submap.size = next - dma->ctrl.submap.offset;
>
> dma_dev = ntb->epf->epc->dev.parent;
> for (i = 0; i < dma->rd_ch_cnt; i++) {
> @@ -481,6 +520,8 @@ static int epf_ntb_dma_collect(struct epf_ntb *ntb)
> if (!dma)
> return -ENOMEM;
>
> + mutex_init(&dma->lock);
> +
> switch (ctrl->u.dma_ctrl.reg_layout) {
> case PCI_EPC_AUX_DMA_REG_LAYOUT_DW_EDMA:
> ret = epf_ntb_dw_edma_collect(ntb, dma, ctrl, resources, count);
> @@ -551,7 +592,7 @@ static int epf_ntb_dma_bar_init(struct epf_ntb *ntb)
> return -EOPNOTSUPP;
>
> barno = ntb->epf_ntb_bar[BAR_DMA];
> - mapped_size = dma->ctrl.submap.size;
> + mapped_size = dma->ctrl.submap.offset + dma->ctrl.submap.size;
> /*
> * Submaps cannot be installed until the host assigns the BAR address.
> * Use address 0 for the temporary BAR Match Mode mapping, as is done
> @@ -607,21 +648,25 @@ static void epf_ntb_dma_bar_clear(struct epf_ntb *ntb)
> memset(bar, 0, sizeof(*bar));
> }
>
> -static int epf_ntb_dma_set_bar(struct epf_ntb *ntb)
> +static int epf_ntb_dma_set_bar_locked(struct epf_ntb *ntb,
> + const dma_addr_t *mw_addr)
> {
> struct pci_epf_bar_submap *old_submap;
> struct epf_ntb_dma *dma = ntb->dma;
> unsigned int old_num_submap;
> struct pci_epf_bar *bar;
> + dma_addr_t old_mw_addr;
> int restore, ret;
> -
> - if (!dma)
> - return 0;
> + lockdep_assert_held(&dma->lock);
>
> bar = &ntb->epf->bar[ntb->epf_ntb_bar[BAR_DMA]];
>
> old_submap = bar->submap;
> old_num_submap = bar->num_submap;
> + if (mw_addr) {
> + old_mw_addr = dma->submap[0].phys_addr;
> + dma->submap[0].phys_addr = *mw_addr;
> + }
> bar->submap = dma->submap;
> bar->num_submap = dma->num_submap;
>
> @@ -631,6 +676,8 @@ static int epf_ntb_dma_set_bar(struct epf_ntb *ntb)
> return 0;
>
> /* A failed dynamic update may have already removed the old mapping. */
> + if (mw_addr)
> + dma->submap[0].phys_addr = old_mw_addr;
> bar->submap = old_submap;
> bar->num_submap = old_num_submap;
> restore = pci_epc_set_bar(ntb->epf->epc, ntb->epf->func_no,
> @@ -642,6 +689,18 @@ static int epf_ntb_dma_set_bar(struct epf_ntb *ntb)
> return ret;
> }
>
> +static int epf_ntb_dma_set_bar(struct epf_ntb *ntb)
> +{
> + struct epf_ntb_dma *dma = ntb->dma;
> +
> + if (!dma)
> + return 0;
> +
> + guard(mutex)(&dma->lock);
> +
> + return epf_ntb_dma_set_bar_locked(ntb, NULL);
> +}
> +
> /**
> * epf_ntb_configure_mw() - Configure the Outbound Address Space for VHOST
> * to access the memory window of HOST
> @@ -780,6 +839,13 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
> EPF_NTB_COMMAND_STATUS_OK;
> break;
> case EPF_NTB_COMMAND_LINK_UP:
> + if (ntb->dma && ntb->dma->ctrl.submap.offset &&
> + !(argument & EPF_NTB_LINK_UP_DMA_MW_SUPPORTED)) {
> + epf_ntb_set_link_enabled(ntb, false);
> + dev_err(dev, "Host does not support MW/DMA BAR sharing\n");
> + ctrl->command_status = EPF_NTB_COMMAND_STATUS_ERROR;
suppose it should be fallback to old method?
EPF_NTB_LINK_UP_DMA_MW_SUPPORTED is new feature.
Frank
> + break;
> + }
> ret = epf_ntb_set_link_enabled(ntb, true);
> if (ret < 0)
> ctrl->command_status = EPF_NTB_COMMAND_STATUS_ERROR;
> @@ -1269,6 +1335,7 @@ static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
> */
> static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
> {
> + bool shared;
> int ret = 0;
> int i;
> u64 size;
> @@ -1278,22 +1345,25 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
> for (i = 0; i < ntb->num_mws; i++) {
> size = ntb->mws_size[i];
> barno = ntb->epf_ntb_bar[BAR_MW1 + i];
> -
> - ntb->epf->bar[barno].barno = barno;
> - ntb->epf->bar[barno].size = size;
> - ntb->epf->bar[barno].addr = NULL;
> - ntb->epf->bar[barno].phys_addr = 0;
> - ntb->epf->bar[barno].flags |= upper_32_bits(size) ?
> - PCI_BASE_ADDRESS_MEM_TYPE_64 :
> - PCI_BASE_ADDRESS_MEM_TYPE_32;
> -
> - ret = pci_epc_set_bar(ntb->epf->epc,
> - ntb->epf->func_no,
> - ntb->epf->vfunc_no,
> - &ntb->epf->bar[barno]);
> - if (ret) {
> - dev_err(dev, "MW set failed\n");
> - goto err_alloc_mem;
> + shared = epf_ntb_dma_shares_bar(ntb, barno);
> +
> + if (!shared) {
> + ntb->epf->bar[barno].barno = barno;
> + ntb->epf->bar[barno].size = size;
> + ntb->epf->bar[barno].addr = NULL;
> + ntb->epf->bar[barno].phys_addr = 0;
> + ntb->epf->bar[barno].flags |= upper_32_bits(size) ?
> + PCI_BASE_ADDRESS_MEM_TYPE_64 :
> + PCI_BASE_ADDRESS_MEM_TYPE_32;
> +
> + ret = pci_epc_set_bar(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + &ntb->epf->bar[barno]);
> + if (ret) {
> + dev_err(dev, "MW set failed\n");
> + goto err_alloc_mem;
> + }
> }
>
> /* Allocate EPC outbound memory windows to vpci vntb device */
> @@ -1310,10 +1380,11 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
> return ret;
>
> err_set_bar:
> - pci_epc_clear_bar(ntb->epf->epc,
> - ntb->epf->func_no,
> - ntb->epf->vfunc_no,
> - &ntb->epf->bar[barno]);
> + if (!shared)
> + pci_epc_clear_bar(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + &ntb->epf->bar[barno]);
> err_alloc_mem:
> epf_ntb_mw_bar_clear(ntb, i);
> return ret;
> @@ -1331,10 +1402,11 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
>
> for (i = 0; i < num_mws; i++) {
> barno = ntb->epf_ntb_bar[BAR_MW1 + i];
> - pci_epc_clear_bar(ntb->epf->epc,
> - ntb->epf->func_no,
> - ntb->epf->vfunc_no,
> - &ntb->epf->bar[barno]);
> + if (!epf_ntb_dma_shares_bar(ntb, barno))
> + pci_epc_clear_bar(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + &ntb->epf->bar[barno]);
>
> pci_epc_mem_free_addr(ntb->epf->epc,
> ntb->vpci_mw_phy[i],
> @@ -1936,6 +2008,16 @@ static int vntb_epf_mw_set_trans(struct ntb_dev *ndev, int pidx, int idx,
> dev = &ndev->dev;
> barno = ntb->epf_ntb_bar[BAR_MW1 + idx];
> epf_bar = &ntb->epf->bar[barno];
> + if (epf_ntb_dma_shares_bar(ntb, barno)) {
> + /* DMA submaps start after the configured MW size. */
> + if (size != ntb->mws_size[idx])
> + return -EINVAL;
> +
> + guard(mutex)(&ntb->dma->lock);
> +
> + return epf_ntb_dma_set_bar_locked(ntb, &addr);
> + }
> +
> epf_bar->phys_addr = addr;
> epf_bar->barno = barno;
> epf_bar->size = size;
> @@ -2134,15 +2216,17 @@ static int vntb_epf_mw_get_align(struct ntb_dev *ndev, int pidx, int idx,
> resource_size_t *size_max)
> {
> struct epf_ntb *ntb = ntb_ndev(ndev);
> + enum pci_barno barno = ntb->epf_ntb_bar[BAR_MW1 + idx];
> + u64 size = ntb->mws_size[idx];
>
> if (addr_align)
> *addr_align = SZ_4K;
>
> if (size_align)
> - *size_align = 1;
> + *size_align = epf_ntb_dma_shares_bar(ntb, barno) ? size : 1;
>
> if (size_max)
> - *size_max = ntb->mws_size[idx];
> + *size_max = size;
>
> return 0;
> }
> diff --git a/include/linux/pci-epf-ntb.h b/include/linux/pci-epf-ntb.h
> index 5cc0f0badae0..8131ed4c6ac9 100644
> --- a/include/linux/pci-epf-ntb.h
> +++ b/include/linux/pci-epf-ntb.h
> @@ -24,6 +24,9 @@
> #define EPF_NTB_DB_COUNT_MASK GENMASK(15, 0)
> #define EPF_NTB_MSIX_ENABLE BIT(16)
>
> +/* LINK_UP argument: the host honors the MW/DMA BAR boundary. */
> +#define EPF_NTB_LINK_UP_DMA_MW_SUPPORTED BIT(0)
> +
> #define EPF_NTB_COMMAND_STATUS_OK 1
> #define EPF_NTB_COMMAND_STATUS_ERROR 2
>
> --
> 2.54.0
>
next prev parent reply other threads:[~2026-10-21 15:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 4:22 [PATCH v7 00/10] PCI: endpoint: Remote DMA support via vNTB Koichiro Den
2026-10-21 4:22 ` [PATCH v7 01/10] PCI: endpoint: Add DMA auxiliary resource metadata Koichiro Den
2026-10-21 4:22 ` [PATCH v7 02/10] PCI: dwc: Expose endpoint DMA resources Koichiro Den
2026-10-21 4:22 ` [PATCH v7 03/10] PCI: endpoint: pci-epf-vntb: Move epf_ntb_is_bar_used() up Koichiro Den
2026-10-21 4:22 ` [PATCH v7 04/10] PCI: endpoint: Add pci-epf-ntb.h for the shared NTB control layout Koichiro Den
2026-10-21 4:22 ` [PATCH v7 05/10] PCI: endpoint: pci-epf-vntb: Export endpoint DMA channels Koichiro Den
2026-10-21 4:22 ` [PATCH v7 06/10] PCI: endpoint: pci-epf-vntb: Allow DMA and MW to share a BAR Koichiro Den
2026-10-21 15:52 ` Frank Li [this message]
2026-10-21 16:35 ` Koichiro Den
2026-10-21 4:22 ` [PATCH v7 07/10] Documentation: PCI: endpoint: Document vNTB DMA export Koichiro Den
2026-10-21 4:22 ` [PATCH v7 08/10] NTB: ntb_hw_epf: Use the shared NTB control layout Koichiro Den
2026-10-21 15:53 ` Frank Li
2026-10-21 4:22 ` [PATCH v7 09/10] NTB: ntb_hw_epf: Discover vNTB-embedded DMA Koichiro Den
2026-10-21 4:22 ` [PATCH v7 10/10] NTB: ntb_hw_epf: Support DMA and MW sharing a BAR Koichiro Den
2026-10-21 15:58 ` Frank Li
2026-10-21 16:57 ` Koichiro Den
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=atjfwC1LTX3L6ncV@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=allenbh@gmail.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=corbet@lwn.net \
--cc=dave.jiang@intel.com \
--cc=den@valinux.co.jp \
--cc=jbrunet@baylibre.com \
--cc=jdmason@kudzu.us \
--cc=jingoohan1@gmail.com \
--cc=kishon@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=ntb@lists.linux.dev \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®