Re: [PATCH v2 2/3] dmaengine: dw-axi-dmac: retain descriptors when termination times out

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Mon, Nov 09, 2026 at 08:06:01PM -0700, James Hilliard wrote:
> dma_chan_terminate_all() warns when the channel enable bit does not clear,
> but then frees the descriptors and returns success. Its synchronize
> callback only drains virtual-channel callbacks, so terminate_sync() can
> also report success while hardware still accesses the transfer.
> 
> Return the polling error before detaching descriptors or changing the
> peripheral routing. This keeps the transfer resources available while
> the channel remains enabled and lets the caller retry termination without
> treating the timeout as a successful stop.
> 
> Hold the channel lock across disabling, polling and descriptor detachment
> so an interrupt handler cannot restart the channel between the stop check
> and cleanup.

...

>  	ret = readx_poll_timeout_atomic(axi_chan_is_hw_enable, chan, enabled, !enabled,
>  				       1 * USEC_PER_MSEC, 50 * USEC_PER_MSEC);
> -	if (ret == -ETIMEDOUT)
> +	if (ret) {

Just noticed, this should be part of the previous patch.

> +		spin_unlock_irqrestore(&chan->vc.lock, flags);
>  		dev_warn(dmaengine_chan_dev(dchan),
>  			 "%s failed to stop\n", axi_chan_name(chan));
> +		return ret;
> +	}

-- 
With Best Regards,
Andy Shevchenko