From: Thomas Zimmermann <tzimmermann@suse.de>
To: Tejas Vipin <tejasvipin76@gmail.com>,
Laurent.pinchart@ideasonboard.com, patrik.r.jakobsson@gmail.com,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
airlied@gmail.com, daniel@ffwll.ch
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] drm/gma500: replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi
Date: Thu, 12 Sep 2024 09:19:36 +0200 [thread overview]
Message-ID: <b0f77fcc-5d84-4727-9a17-9d1f1e2c5b76@suse.de> (raw)
In-Reply-To: <20240911180650.820598-1-tejasvipin76@gmail.com>
Hi
Am 11.09.24 um 20:06 schrieb Tejas Vipin:
> Replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi since
> monitor HDMI information is available after EDID is parsed. Additionally
> rewrite the code the code to have fewer indentation levels.
The problem is that the entire logic is outdated. The content
of cdv_hdmi_detect() should go into cdv_hdmi_get_modes(), the detect_ctx
callback should be set to drm_connector_helper_detect_from_ddc() and
cdv_hdmi_detect() should be deleted. The result is that ->detect_ctx
will detect the presence of a display and ->get_modes will update EDID
and other properties.
Do you have a device for testing such a change?
Best regards
Thomas
>
> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
> ---
> Changes in v2:
> - Use drm_edid instead of edid
>
> Link to v1: https://lore.kernel.org/all/20240910051856.700210-1-tejasvipin76@gmail.com/
> ---
> drivers/gpu/drm/gma500/cdv_intel_hdmi.c | 24 +++++++++++++-----------
> 1 file changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
> index 2d95e0471291..701f8bbd5f2b 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
> @@ -128,23 +128,25 @@ static enum drm_connector_status cdv_hdmi_detect(
> {
> struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
> struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv;
> - struct edid *edid = NULL;
> + const struct drm_edid *drm_edid;
> + int ret;
> enum drm_connector_status status = connector_status_disconnected;
>
> - edid = drm_get_edid(connector, connector->ddc);
> + drm_edid = drm_edid_read_ddc(connector, connector->ddc);
> + ret = drm_edid_connector_update(connector, drm_edid);
>
> hdmi_priv->has_hdmi_sink = false;
> hdmi_priv->has_hdmi_audio = false;
> - if (edid) {
> - if (edid->input & DRM_EDID_INPUT_DIGITAL) {
> - status = connector_status_connected;
> - hdmi_priv->has_hdmi_sink =
> - drm_detect_hdmi_monitor(edid);
> - hdmi_priv->has_hdmi_audio =
> - drm_detect_monitor_audio(edid);
> - }
> - kfree(edid);
> + if (ret)
> + return status;
> +
> + if (drm_edid_is_digital(drm_edid)) {
> + status = connector_status_connected;
> + hdmi_priv->has_hdmi_sink = connector->display_info.is_hdmi;
> + hdmi_priv->has_hdmi_audio = connector->display_info.has_audio;
> }
> + drm_edid_free(drm_edid);
> +
> return status;
> }
>
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
next prev parent reply other threads:[~2024-09-12 7:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-11 18:06 Tejas Vipin
2024-09-12 7:19 ` Thomas Zimmermann [this message]
2024-09-12 8:48 ` Jani Nikula
2024-09-12 8:56 ` Jani Nikula
2024-09-12 9:26 ` Thomas Zimmermann
2024-09-12 9:38 ` Jani Nikula
2024-09-12 10:45 ` Thomas Zimmermann
2024-09-12 11:25 ` Jani Nikula
2024-09-12 13:10 ` Thomas Zimmermann
2024-09-12 13:25 ` Jani Nikula
2024-09-12 9:18 ` Thomas Zimmermann
2024-09-12 9:30 ` Jani Nikula
2024-09-12 11:08 ` Thomas Zimmermann
2024-09-12 13:30 ` Ville Syrjälä
2024-09-12 14:29 ` Tejas Vipin
2024-09-23 9:36 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b0f77fcc-5d84-4727-9a17-9d1f1e2c5b76@suse.de \
--to=tzimmermann@suse.de \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=patrik.r.jakobsson@gmail.com \
--cc=tejasvipin76@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®