Re: [PATCH v5] PCI: qcom: Use default config space read function

[Marc Gonzalez <marc.w.gonzalez@free.fr>]

Bjorn,

I think this patch is good enough to land now.

Regards.

On 25/03/2019 16:42, Marc Gonzalez wrote:

> Move the device class fudge to a proper fixup function, and remove
> qcom_pcie_rd_own_conf() which has become useless.
> 
> NB: dw_pcie_setup_rc() already did the right thing, but it's broken
> on older qcom chips, such as 8064.
> 
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> ---
> Changes from v4 to v5: Apply fixup to all qcom chips, the same way it was before
> (thus the code remains functionally equivalent)
> Drop Srinivas' Tested-by tag because of the change
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 23 ++++++-----------------
>  1 file changed, 6 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index a7f703556790..0ed235d560e3 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
>  	return ret;
>  }
>  
> -static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> -				 u32 *val)
> -{
> -	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -
> -	/* the device class is not reported correctly from the register */
> -	if (where == PCI_CLASS_REVISION && size == 4) {
> -		*val = readl(pci->dbi_base + PCI_CLASS_REVISION);
> -		*val &= 0xff;	/* keep revision id */
> -		*val |= PCI_CLASS_BRIDGE_PCI << 16;
> -		return PCIBIOS_SUCCESSFUL;
> -	}
> -
> -	return dw_pcie_read(pci->dbi_base + where, size, val);
> -}
> -
>  static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
>  	.host_init = qcom_pcie_host_init,
> -	.rd_own_conf = qcom_pcie_rd_own_conf,
>  };
>  
>  /* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
> @@ -1309,6 +1292,12 @@ static const struct of_device_id qcom_pcie_match[] = {
>  	{ }
>  };
>  
> +static void qcom_fixup_class(struct pci_dev *dev)
> +{
> +	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
> +
>  static struct platform_driver qcom_pcie_driver = {
>  	.probe = qcom_pcie_probe,
>  	.driver = {