From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: Stanimir Varbanov <svarbanov@mm-sol.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
PCI <linux-pci@vger.kernel.org>,
MSM <linux-arm-msm@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Jeffrey Hugo <jhugo@codeaurora.org>
Subject: Re: [PATCH v4] PCI: qcom: Use default config space read function
Date: Mon, 25 Mar 2019 13:11:14 +0100 [thread overview]
Message-ID: <f142da4d-303a-89f3-ba5a-b6800d613e15@free.fr> (raw)
In-Reply-To: <8cd24928-54d0-c320-b53f-08332d434477@free.fr>
Stanimir,
Is v4 good enough for Bjorn to pick up?
Regards.
On 18/03/2019 18:14, Marc Gonzalez wrote:
> We don't need to fudge the device class in qcom_pcie_rd_own_conf()
> because dw_pcie_setup_rc() already does the right thing:
>
> /* Program correct class for RC */
> dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
>
> However, the above has no effect on 8064, thus a fixup is required.
>
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> Changes from v3 to v4: Define and use DEV_ID_8064 (not in include/linux/pci_ids.h because not shared)
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++-----------------
> 1 file changed, 8 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index d185ea5fe996..712a83354f9d 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
> return ret;
> }
>
> -static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> - u32 *val)
> -{
> - struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -
> - /* the device class is not reported correctly from the register */
> - if (where == PCI_CLASS_REVISION && size == 4) {
> - *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
> - *val &= 0xff; /* keep revision id */
> - *val |= PCI_CLASS_BRIDGE_PCI << 16;
> - return PCIBIOS_SUCCESSFUL;
> - }
> -
> - return dw_pcie_read(pci->dbi_base + where, size, val);
> -}
> -
> static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
> .host_init = qcom_pcie_host_init,
> - .rd_own_conf = qcom_pcie_rd_own_conf,
> };
>
> /* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
> @@ -1309,6 +1292,14 @@ static const struct of_device_id qcom_pcie_match[] = {
> { }
> };
>
> +#define DEV_ID_8064 0x0101
> +
> +static void qcom_fixup_class(struct pci_dev *dev)
> +{
> + dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, DEV_ID_8064, qcom_fixup_class);
> +
> static struct platform_driver qcom_pcie_driver = {
> .probe = qcom_pcie_probe,
> .driver = {
next prev parent reply other threads:[~2019-03-25 12:11 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 14:56 [RFC PATCH v1] PCI: qcom: Use quirk to override incorrect device class Marc Gonzalez
2019-03-12 12:42 ` Stanimir Varbanov
2019-03-12 17:18 ` Marc Gonzalez
2019-03-12 17:34 ` Marc Gonzalez
2019-03-13 11:45 ` [PATCH v2] PCI: qcom: Use default config space read function Marc Gonzalez
2019-03-13 13:13 ` Marc Gonzalez
2019-03-13 18:29 ` Srinivas Kandagatla
2019-03-13 20:39 ` Marc Gonzalez
2019-03-13 21:52 ` Srinivas Kandagatla
2019-03-13 22:26 ` Marc Gonzalez
2019-03-14 11:10 ` Srinivas Kandagatla
2019-03-14 13:18 ` Marc Gonzalez
2019-03-18 14:28 ` [PATCH v3] " Marc Gonzalez
2019-03-18 14:39 ` Srinivas Kandagatla
2019-03-18 16:35 ` Stanimir Varbanov
2019-03-18 17:14 ` [PATCH v4] " Marc Gonzalez
2019-03-25 12:11 ` Marc Gonzalez [this message]
2019-03-25 13:32 ` Stanimir Varbanov
2019-03-25 15:42 ` [PATCH v5] " Marc Gonzalez
2019-03-29 13:48 ` Marc Gonzalez
2019-03-29 15:55 ` Stanimir Varbanov
2019-03-29 16:38 ` Lorenzo Pieralisi
2019-04-30 14:06 ` [RFC PATCH v1] PCI: qcom: Use quirk to override incorrect device class Lorenzo Pieralisi
2019-05-02 9:42 ` Marc Gonzalez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f142da4d-303a-89f3-ba5a-b6800d613e15@free.fr \
--to=marc.w.gonzalez@free.fr \
--cc=andy.gross@linaro.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=svarbanov@mm-sol.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®