From: Len Brown <lenb@kernel.org>
To: rjw@rjwysocki.net, linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>,
Len Brown <len.brown@intel.com>
Subject: [PATCH 3/4] tools/power turbostat: KNL workaround for %Busy and Avg_MHz
Date: Sat, 26 Sep 2015 01:05:14 -0400 [thread overview]
Message-ID: <b2b34dfe4d9aa4c468fc363b3b666974783ed1f9.1443243089.git.len.brown@intel.com> (raw)
In-Reply-To: <1443243915-6696-1-git-send-email-lenb@kernel.org>
In-Reply-To: <135919a3a80565070b9645009e65f73e72c661c0.1443243089.git.len.brown@intel.com>
From: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
KNL increments APERF and MPERF every 1024 clocks.
This is compliant with the architecture specification,
which requires that only the ratio of APERF/MPERF need be valid.
However, turbostat takes advantage of the fact that these
two MSRs increment every un-halted clock
at the actual and base frequency:
AVG_MHz = APERF_delta/measurement_interval
%Busy = MPERF_delta/TSC_delta
This quirk is needed for these calculations to also work on KNL,
which would otherwise show a value 1024x smaller than expected.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
tools/power/x86/turbostat/turbostat.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index e05d3033..d333c81 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -71,6 +71,7 @@ unsigned int extra_msr_offset32;
unsigned int extra_msr_offset64;
unsigned int extra_delta_offset32;
unsigned int extra_delta_offset64;
+unsigned int aperf_mperf_multiplier = 1;
int do_smi;
double bclk;
unsigned int show_pkg;
@@ -984,6 +985,8 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
return -3;
if (get_msr(cpu, MSR_IA32_MPERF, &t->mperf))
return -4;
+ t->aperf = t->aperf * aperf_mperf_multiplier;
+ t->mperf = t->mperf * aperf_mperf_multiplier;
}
if (do_smi) {
@@ -2541,6 +2544,13 @@ int is_knl(unsigned int family, unsigned int model)
return 0;
}
+unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model)
+{
+ if (is_knl(family, model))
+ return 1024;
+ return 1;
+}
+
#define SLM_BCLK_FREQS 5
double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0};
@@ -2742,6 +2752,9 @@ void process_cpuid()
}
}
+ if (has_aperf)
+ aperf_mperf_multiplier = get_aperf_mperf_multiplier(family, model);
+
do_nhm_platform_info = do_nhm_cstates = do_smi = probe_nhm_msrs(family, model);
do_snb_cstates = has_snb_msrs(family, model);
do_pc2 = do_snb_cstates && (pkg_cstate_limit >= PCL__2);
--
2.6.0.rc1
next prev parent reply other threads:[~2015-09-26 5:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-26 5:05 intel_idle and turbostat patches for Linux-4.3 Len Brown
2015-09-26 5:05 ` [PATCH 1/4] intel_idle: Skylake Client Support - updated Len Brown
2015-09-26 5:05 ` [PATCH 2/4] tools/power turbostat: IVB Xeon: fix --debug regression Len Brown
2015-09-26 5:05 ` Len Brown [this message]
2015-09-26 5:05 ` [PATCH 4/4] tools/power turbostat: SKL: Adjust for TSC difference from base frequency Len Brown
2015-09-27 13:55 ` intel_idle and turbostat patches for Linux-4.3 Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b2b34dfe4d9aa4c468fc363b3b666974783ed1f9.1443243089.git.len.brown@intel.com \
--to=lenb@kernel.org \
--cc=hubert.chrzaniuk@intel.com \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®