[PATCH v9 0/4] DRM/MSM: Support for Adreno 663 GPU

[PATCH v9 0/4] DRM/MSM: Support for Adreno 663 GPU

[Akhil P Oommen]

This series adds support for Adreno 663 gpu found in SA8775P (Lemans)
chipsets. The closest gpu which is currently supported in drm-msm is A660.
Following are the major differences with that:
        1. gmu/zap firmwares
        2. Recommended to disable Level2 swizzling

Verified kmscube/weston/glmark2-es2.

Bjorn, only DT patches are pending in this series. And all of them are ready
to pick up right away.

Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
Changes in v9:
- Rebased on top of Bjorn's arm64-for-6.20 tree (Dec/30 tip)
- Link to v8: https://lore.kernel.org/r/20251105-a663-gpu-support-v8-0-62a7aaa551e3@oss.qualcomm.com

Changes in v8:
- Corrected patch#1 subject (Dmitry)
- Dropped the patch for qfrom binding doc as it is already picked up.
- Link to v7: https://lore.kernel.org/r/20251105-a663-gpu-support-v7-0-1bcf7f151125@oss.qualcomm.com

Changes in v7:
- Rebased on next-20251105
- Dropped drm-msm speedbin patch which is already picked up
- Picked up trailers
- Link to v6: https://lore.kernel.org/r/20250910-a663-gpu-support-v6-0-5da15827b249@oss.qualcomm.com

Changes in v6:
- Keep the efuse's reg range 4K aligned (Konrad)
- Update GMU's opp table to bump frequency to 500Mhz (Konrad)
- Link to v5: https://lore.kernel.org/r/20250909-a663-gpu-support-v5-0-761fa0a876bf@oss.qualcomm.com

Changes in v5:
- Remove unnecessary labels in the gpu cooling patch (Konrad)
- Update the RPMH corner for 530 Mhz
- Wire up the gpu speedbin node to the gpu
- Link to v4: https://lore.kernel.org/r/20250822-a663-gpu-support-v4-0-97d26bb2144e@oss.qualcomm.com

Changes in v4:
- Rebased on top of another series which renames DT files
- Enabled GPU on IoT boards as per the latest definition
- Picked up SKU detection support
- Added GPU passive cooling support
- Link to v3: https://lore.kernel.org/r/20241030-a663-gpu-support-v3-0-bdf1d9ce6021@quicinc.com

Changes in v3:
- Rebased on the latest msm-next tip
- Added R-b tags from Dmitry
- Dropped patch #1 and #2 from v2 revision since they are already
picked up in msm-next
- Link to v2: https://lore.kernel.org/r/20241022-a663-gpu-support-v2-0-38da38234697@quicinc.com

Changes in v2:
- Fixed ubwc configuration (dimtry)
- Split out platform dt patch (dimtry)
- Fix formatting in the dt patch (dimtry)
- Updated Opp table to include all levels
- Updated bw IB votes to match downstream
- Rebased on top of msm-next tip
- Link to v1: https://lore.kernel.org/r/20240918-a663-gpu-support-v1-0-25fea3f3d64d@quicinc.com

---
Akhil P Oommen (2):
      arm64: dts: qcom: lemans-evk: Enable Adreno 663 GPU
      arm64: dts: qcom: qcs9100-ride: Enable Adreno 663 GPU

Gaurav Kohli (1):
      arm64: dts: qcom: lemans: Add GPU cooling

Puranam V G Tejaswi (1):
      arm64: dts: qcom: lemans: Add gpu and gmu nodes

 arch/arm64/boot/dts/qcom/lemans-evk.dts          |   8 ++
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi |   8 ++
 arch/arm64/boot/dts/qcom/lemans.dtsi             | 174 ++++++++++++++++++++++-
 3 files changed, 184 insertions(+), 6 deletions(-)
---
base-commit: 0e31dcfefd21ed76ff1b2d05647cd34336ab9772
change-id: 20240917-a663-gpu-support-b1475c828606

Best regards,
-- 
Akhil P Oommen <akhilpo@oss.qualcomm.com>

[PATCH v9 1/4] arm64: dts: qcom: lemans: Add gpu and gmu nodes

[Akhil P Oommen]

From: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>

Add gpu and gmu nodes for Lemans chipset. Also, add the speedbin
qfprom node and wire it up with GPU node.

Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 119 +++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 0b154d57ba24..883f9e0ab45c 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -1098,6 +1098,18 @@ ipcc: mailbox@408000 {
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sa8775p-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00784000 0x0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@240c {
+				reg = <0x240c 0x1>;
+				bits = <0 8>;
+			};
+		};
+
 		gpi_dma2: dma-controller@800000  {
 			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00800000 0x0 0x60000>;
@@ -4135,6 +4147,113 @@ tcsr: syscon@1fc0000 {
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-663.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0xc00>,
+				 <&adreno_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-405000000 {
+					opp-hz = /bits/ 64 <405000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5285156>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-530000000 {
+					opp-hz = /bits/ 64 <530000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x2>;
+				};
+
+				opp-676000000 {
+					opp-hz = /bits/ 64 <676000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8171875>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-778000000 {
+					opp-hz = /bits/ 64 <778000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <10687500>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-663.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x34000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sa8775p-gpucc";
 			reg = <0x0 0x03d90000 0x0 0xa000>;

-- 
2.51.0

[PATCH v9 2/4] arm64: dts: qcom: lemans: Add GPU cooling

[Akhil P Oommen]

From: Gaurav Kohli <quic_gkohli@quicinc.com>

Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.

Set up GPU cooling by throttling the GPU speed
when reaching 105°C.

Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 55 ++++++++++++++++++++++++++++++++----
 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 883f9e0ab45c..14d9f31e7086 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -21,6 +21,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -7514,8 +7515,15 @@ gpuss-0-thermal {
 
 			thermal-sensors = <&tsens0 5>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7534,8 +7542,15 @@ gpuss-1-thermal {
 
 			thermal-sensors = <&tsens0 6>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7554,8 +7569,15 @@ gpuss-2-thermal {
 
 			thermal-sensors = <&tsens0 7>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss2_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7744,8 +7766,15 @@ gpuss-3-thermal {
 
 			thermal-sensors = <&tsens1 5>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss3_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7764,8 +7793,15 @@ gpuss-4-thermal {
 
 			thermal-sensors = <&tsens1 6>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss4_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7784,8 +7820,15 @@ gpuss-5-thermal {
 
 			thermal-sensors = <&tsens1 7>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss5_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";

-- 
2.51.0

[PATCH v9 3/4] arm64: dts: qcom: lemans-evk: Enable Adreno 663 GPU

[Akhil P Oommen]

Enable GPU for lemans-evk platform and provide path for zap
shader.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index b40fa203e4a2..28bf152f5fa8 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -454,6 +454,14 @@ &gpi_dma2 {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
 &i2c18 {
 	status = "okay";
 

-- 
2.51.0

[PATCH v9 4/4] arm64: dts: qcom: qcs9100-ride: Enable Adreno 663 GPU

[Akhil P Oommen]

Enable GPU on both qcs9100-ride platforms and provide the path
for zap shader.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index c69aa2f41ce2..8fb7d1fc6d56 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -436,6 +436,14 @@ vreg_l8e: ldo8 {
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
 &i2c11 {
 	clock-frequency = <400000>;
 	status = "okay";

-- 
2.51.0

Re: [PATCH v9 3/4] arm64: dts: qcom: lemans-evk: Enable Adreno 663 GPU

[Konrad Dybcio]

On 12/30/25 1:33 PM, Akhil P Oommen wrote:
> Enable GPU for lemans-evk platform and provide path for zap
> shader.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v9 4/4] arm64: dts: qcom: qcs9100-ride: Enable Adreno 663 GPU

[Konrad Dybcio]

On 12/30/25 1:33 PM, Akhil P Oommen wrote:
> Enable GPU on both qcs9100-ride platforms and provide the path
> for zap shader.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v9 0/4] DRM/MSM: Support for Adreno 663 GPU

[Bjorn Andersson]

On Tue, 30 Dec 2025 18:03:24 +0530, Akhil P Oommen wrote:
> This series adds support for Adreno 663 gpu found in SA8775P (Lemans)
> chipsets. The closest gpu which is currently supported in drm-msm is A660.
> Following are the major differences with that:
>         1. gmu/zap firmwares
>         2. Recommended to disable Level2 swizzling
> 
> Verified kmscube/weston/glmark2-es2.
> 
> [...]

Applied, thanks!

[1/4] arm64: dts: qcom: lemans: Add gpu and gmu nodes
      commit: 6940c66825e4c27c53b33e367806ac1dc922583d
[2/4] arm64: dts: qcom: lemans: Add GPU cooling
      commit: 4a6488a8070b95702d6f5dec444fbddfaaaff8cf
[3/4] arm64: dts: qcom: lemans-evk: Enable Adreno 663 GPU
      commit: dbff283922e32eaa3d81233b69c02ef2abe7ee9b
[4/4] arm64: dts: qcom: qcs9100-ride: Enable Adreno 663 GPU
      commit: 247b55ddf76ee65b1a63e5c834341a07996de07d

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>