mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support
@ 2026-03-26  7:51 Joy Zou
  2026-03-26  7:51 ` [PATCH v2 1/5] dt-bindings: arm: fsl: add i.MX91 9x9 QSB board Joy Zou
                   ` (5 more replies)
  0 siblings, 6 replies; 11+ messages in thread
From: Joy Zou @ 2026-03-26  7:51 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Joy Zou,
	Daniel Baluta, Conor Dooley

Add i.MX91 9x9 QSB basic support.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v2:
- Add three new patches to remove the clock-frequency property from mdio node.
- Remove the clock-frequency property from mdio node for patch #5.
- Correct GPIO pin number typo: <&gpio3 00 GPIO_ACTIVE_LOW> to <&gpio3 0 GPIO_ACTIVE_LOW> for patch #5.
- Add whitespace before brace in BUCK4 node for patch #5.
- Remove one level of indentation for rtc node for patch #5.
- Add Acked-by and Reviewed-by tag for patch #1.
- Add Reviewed-by tag for patch #5.
- Link to v1: https://lore.kernel.org/r/20260319-b4-imx91-qsb-dts-v1-0-2eedc01d8af0@nxp.com

---
Joy Zou (5):
      dt-bindings: arm: fsl: add i.MX91 9x9 QSB board
      arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node
      arm64: dts: imx93-11x11-evk: remove unused property clock-frequency from mdio node
      arm64: dts: imx93-9x9-qsb: remove unused property clock-frequency from mdio node
      arm64: dts: freescale: add i.MX91 9x9 QSB basic support

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts  |   1 -
 arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts    | 425 +++++++++++++++++++++
 .../boot/dts/freescale/imx93-11x11-evk-common.dtsi |   1 -
 arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts    |   1 -
 6 files changed, 427 insertions(+), 3 deletions(-)
---
base-commit: 8e42d2514a7e8eb8d740d0ba82339dd6c0b6463f
change-id: 20260319-b4-imx91-qsb-dts-ce089fb28353

Best regards,
-- 
Joy Zou <joy.zou@nxp.com>


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 1/5] dt-bindings: arm: fsl: add i.MX91 9x9 QSB board
  2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
@ 2026-03-26  7:51 ` Joy Zou
  2026-03-26  7:51 ` [PATCH v2 2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node Joy Zou
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 11+ messages in thread
From: Joy Zou @ 2026-03-26  7:51 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Joy Zou,
	Daniel Baluta, Conor Dooley

Add compatible string for i.MX91 9x9 Quick Start Board.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes in v2:
1. add Reviewed-by and Acked-by tag.
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index da2be7114f6417317b3bc904cc5c1953e64e21ea..6a94e0201f704f87df8b5bae0fcae9b2d9133f91 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1458,6 +1458,7 @@ properties:
       - description: i.MX91 based Boards
         items:
           - enum:
+              - fsl,imx91-9x9-qsb         # i.MX91 9x9 QSB Board
               - fsl,imx91-11x11-evk       # i.MX91 11x11 EVK Board
               - fsl,imx91-11x11-frdm      # FRDM i.MX91 Development Board
               - fsl,imx91-11x11-frdm-s    # FRDM i.MX91S Development Board

-- 
2.37.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node
  2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
  2026-03-26  7:51 ` [PATCH v2 1/5] dt-bindings: arm: fsl: add i.MX91 9x9 QSB board Joy Zou
@ 2026-03-26  7:51 ` Joy Zou
  2026-03-26 15:07   ` Andrew Lunn
  2026-03-26  7:51 ` [PATCH v2 3/5] arm64: dts: imx93-11x11-evk: " Joy Zou
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 11+ messages in thread
From: Joy Zou @ 2026-03-26  7:51 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Joy Zou

The clock-frequency property is not implemented. Remove it to clean up the
device tree.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
index c083b97476a5155b45ead382da22f8bcfd5a4c79..de524f1921de808ee29895852fcbea37565a7e07 100644
--- a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -195,7 +195,6 @@ mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clock-frequency = <5000000>;
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;

-- 
2.37.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 3/5] arm64: dts: imx93-11x11-evk: remove unused property clock-frequency from mdio node
  2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
  2026-03-26  7:51 ` [PATCH v2 1/5] dt-bindings: arm: fsl: add i.MX91 9x9 QSB board Joy Zou
  2026-03-26  7:51 ` [PATCH v2 2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node Joy Zou
@ 2026-03-26  7:51 ` Joy Zou
  2026-03-26 15:07   ` Andrew Lunn
  2026-03-26  7:51 ` [PATCH v2 4/5] arm64: dts: imx93-9x9-qsb: " Joy Zou
                   ` (2 subsequent siblings)
  5 siblings, 1 reply; 11+ messages in thread
From: Joy Zou @ 2026-03-26  7:51 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Joy Zou

The clock-frequency property is not implemented. Remove it to clean up the
device tree.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi b/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi
index 7d3fc4ad7b8b7cf213e8ec977589509a7419a04b..f48e7947cf647355c57c82a42a5c0807f53f3a55 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk-common.dtsi
@@ -187,7 +187,6 @@ mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clock-frequency = <5000000>;
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;

-- 
2.37.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 4/5] arm64: dts: imx93-9x9-qsb: remove unused property clock-frequency from mdio node
  2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
                   ` (2 preceding siblings ...)
  2026-03-26  7:51 ` [PATCH v2 3/5] arm64: dts: imx93-11x11-evk: " Joy Zou
@ 2026-03-26  7:51 ` Joy Zou
  2026-03-26 15:08   ` Andrew Lunn
  2026-03-26  7:51 ` [PATCH v2 5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support Joy Zou
  2026-05-05 16:34 ` [PATCH v2 0/5] Add " Frank Li
  5 siblings, 1 reply; 11+ messages in thread
From: Joy Zou @ 2026-03-26  7:51 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Joy Zou

The clock-frequency property is not implemented. Remove it to clean up the
device tree.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index 7bcebd702106343bde0f084dec6c38d53a985357..01c11c517986a0642d0fedf79a11889c2bf23ae5 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -228,7 +228,6 @@ mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clock-frequency = <5000000>;
 
 		ethphy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";

-- 
2.37.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support
  2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
                   ` (3 preceding siblings ...)
  2026-03-26  7:51 ` [PATCH v2 4/5] arm64: dts: imx93-9x9-qsb: " Joy Zou
@ 2026-03-26  7:51 ` Joy Zou
  2026-03-26 15:10   ` Andrew Lunn
  2026-05-05 16:34 ` [PATCH v2 0/5] Add " Frank Li
  5 siblings, 1 reply; 11+ messages in thread
From: Joy Zou @ 2026-03-26  7:51 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Joy Zou, Daniel Baluta

Add i.MX91 9x9 Quick Start Board support.
- Enable ADC1.
- Enable lpuart1.
- Enable network eqos.
- Enable I2C bus and children nodes under I2C bus.
- Enable USB and related nodes.
- Enable uSDHC1 and uSDHC2.
- Enable Watchdog3.

The board description can refer to the following link:
https://www.nxp.com/design/design-center/development-boards-and-designs/IMX91QSB

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
---
Changes in v2:
1. Correct GPIO pin number typo: <&gpio3 00 GPIO_ACTIVE_LOW> to <&gpio3 0 GPIO_ACTIVE_LOW>.
2. Add whitespace before brace in BUCK4 node.
3. Remove one level of indentation for rtc node.
4. Remove clock-frequency property from mdio node.
5. add Reviewed-by tag.
---
 arch/arm64/boot/dts/freescale/Makefile          |   1 +
 arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts | 425 ++++++++++++++++++++++++
 2 files changed, 426 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bae24b53bce6d33a6929d7c6b3f8c1a70911c5d0..382094fa220ab6c388d182be179a82eefed74b45 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -412,6 +412,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-9x9-qsb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-frdm-s.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts
new file mode 100644
index 0000000000000000000000000000000000000000..1239bbf579da44ab3f4be2dc566c53a1e5db6c05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+	compatible = "fsl,imx91-9x9-qsb", "fsl,imx91";
+	model = "NXP i.MX91 9x9 Quick Start Board";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__ENET1_MDC                           0x57e
+			MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                      0x57e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                  0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                  0x57e
+			MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                  0x57e
+			MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                  0x57e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                  0x5fe
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL            0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                  0x57e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                     0x57e
+			MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                  0x57e
+			MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                  0x57e
+			MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK  0x5fe
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL            0x57e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__LPI2C1_SCL                           0x40000b9e
+			MX91_PAD_I2C1_SDA__LPI2C1_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__LPI2C2_SCL                           0x40000b9e
+			MX91_PAD_I2C2_SDA__LPI2C2_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO1__GPIO3_IO26                          0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7                         0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX                          0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX                          0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x1582
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x1382
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x1382
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x1382
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x1382
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x1382
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x1382
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x1382
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x1382
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x1382
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x1582
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x158e
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x138e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x138e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x138e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x138e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x138e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x138e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x138e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x15fe
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x13fe
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x13fe
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x13fe
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x13fe
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x13fe
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x13fe
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x13fe
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x13fe
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x13fe
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x1582
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x1382
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x1382
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x1382
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x1382
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x138e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x138e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x15fe
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x13fe
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x13fe
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x13fe
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x13fe
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x13fe
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	p3t1085: temperature-sensor@48 {
+		compatible = "nxp,p3t1085";
+		reg = <0x48>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+
+	pmic@32 {
+		compatible = "nxp,pf9453";
+		reg = <0x32>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1140000>;
+				regulator-min-microvolt = <1060000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <610000>;
+				regulator-ramp-delay = <12500>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3450000>;
+				regulator-min-microvolt = <1650000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3450000>;
+				regulator-min-microvolt = <1650000>;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1650000>;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <760000>;
+			};
+
+			ldo_snvs: LDO-SNVS {
+				regulator-name = "LDO-SNVS";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};

-- 
2.37.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node
  2026-03-26  7:51 ` [PATCH v2 2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node Joy Zou
@ 2026-03-26 15:07   ` Andrew Lunn
  0 siblings, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2026-03-26 15:07 UTC (permalink / raw)
  To: Joy Zou
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan, devicetree, linux-kernel, imx,
	linux-arm-kernel

On Thu, Mar 26, 2026 at 03:51:38PM +0800, Joy Zou wrote:
> The clock-frequency property is not implemented. Remove it to clean up the
> device tree.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 3/5] arm64: dts: imx93-11x11-evk: remove unused property clock-frequency from mdio node
  2026-03-26  7:51 ` [PATCH v2 3/5] arm64: dts: imx93-11x11-evk: " Joy Zou
@ 2026-03-26 15:07   ` Andrew Lunn
  0 siblings, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2026-03-26 15:07 UTC (permalink / raw)
  To: Joy Zou
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan, devicetree, linux-kernel, imx,
	linux-arm-kernel

On Thu, Mar 26, 2026 at 03:51:39PM +0800, Joy Zou wrote:
> The clock-frequency property is not implemented. Remove it to clean up the
> device tree.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 4/5] arm64: dts: imx93-9x9-qsb: remove unused property clock-frequency from mdio node
  2026-03-26  7:51 ` [PATCH v2 4/5] arm64: dts: imx93-9x9-qsb: " Joy Zou
@ 2026-03-26 15:08   ` Andrew Lunn
  0 siblings, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2026-03-26 15:08 UTC (permalink / raw)
  To: Joy Zou
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan, devicetree, linux-kernel, imx,
	linux-arm-kernel

On Thu, Mar 26, 2026 at 03:51:40PM +0800, Joy Zou wrote:
> The clock-frequency property is not implemented. Remove it to clean up the
> device tree.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>

Thanks for these patches.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support
  2026-03-26  7:51 ` [PATCH v2 5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support Joy Zou
@ 2026-03-26 15:10   ` Andrew Lunn
  0 siblings, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2026-03-26 15:10 UTC (permalink / raw)
  To: Joy Zou
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	Ye Li, Jacky Bai, Peng Fan, devicetree, linux-kernel, imx,
	linux-arm-kernel, Daniel Baluta

> 4. Remove clock-frequency property from mdio node.


> +&eqos {
> +	phy-handle = <&ethphy1>;
> +	phy-mode = "rgmii-id";
> +	pinctrl-0 = <&pinctrl_eqos>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	mdio {
> +		compatible = "snps,dwmac-mdio";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clock-frequency = <5000000>;

???

	Andrew

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support
  2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
                   ` (4 preceding siblings ...)
  2026-03-26  7:51 ` [PATCH v2 5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support Joy Zou
@ 2026-05-05 16:34 ` Frank Li
  5 siblings, 0 replies; 11+ messages in thread
From: Frank Li @ 2026-05-05 16:34 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Ye Li,
	Jacky Bai, Peng Fan, Joy Zou
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, Daniel Baluta,
	Conor Dooley


On Thu, 26 Mar 2026 15:51:36 +0800, Joy Zou wrote:
> Add i.MX91 9x9 QSB basic support.
> 
> 

Applied, thanks!

[1/5] dt-bindings: arm: fsl: add i.MX91 9x9 QSB board
      commit: 78efc82d617fe7164e142c399cc20f7270ceeb82
[2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node
      commit: 644f6a8f1fb368dbf017688c47b2f913c8d2d35b
[3/5] arm64: dts: imx93-11x11-evk: remove unused property clock-frequency from mdio node
      commit: dd4d83f8a6dfce2b21a4b81c837ad3fe941c9996
[4/5] arm64: dts: imx93-9x9-qsb: remove unused property clock-frequency from mdio node
      commit: 88b82b5d2c066271a0e8ecb4ab7e38d56b19f059
[5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support
      commit: c64e79096d225454a56830ec1fb5e5a464939073

Best regards,
-- 
Frank Li <Frank.Li@nxp.com>


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2026-05-05 16:34 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-03-26  7:51 [PATCH v2 0/5] Add i.MX91 9x9 QSB basic support Joy Zou
2026-03-26  7:51 ` [PATCH v2 1/5] dt-bindings: arm: fsl: add i.MX91 9x9 QSB board Joy Zou
2026-03-26  7:51 ` [PATCH v2 2/5] arm64: dts: imx91-11x11-evk: remove unused property clock-frequency from mdio node Joy Zou
2026-03-26 15:07   ` Andrew Lunn
2026-03-26  7:51 ` [PATCH v2 3/5] arm64: dts: imx93-11x11-evk: " Joy Zou
2026-03-26 15:07   ` Andrew Lunn
2026-03-26  7:51 ` [PATCH v2 4/5] arm64: dts: imx93-9x9-qsb: " Joy Zou
2026-03-26 15:08   ` Andrew Lunn
2026-03-26  7:51 ` [PATCH v2 5/5] arm64: dts: freescale: add i.MX91 9x9 QSB basic support Joy Zou
2026-03-26 15:10   ` Andrew Lunn
2026-05-05 16:34 ` [PATCH v2 0/5] Add " Frank Li

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®