From: Vignesh Raghavendra <vigneshr@ti.com>
To: Ravi Gunasekaran <r-gunasekaran@ti.com>, <nm@ti.com>,
<afd@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Date: Thu, 26 Jan 2023 17:56:19 +0530 [thread overview]
Message-ID: <b61a183e-7316-0cfc-0118-b0cfeea1577f@ti.com> (raw)
In-Reply-To: <20230123095733.31657-4-r-gunasekaran@ti.com>
On 23/01/23 3:27 pm, Ravi Gunasekaran wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
>
> Add support for two instance of OSPI in J721S2 SoC.
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
> Link: https://lore.kernel.org/r/20221122101616.770050-4-mranostay@ti.com
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..d404b595316e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,43 @@
> ti,cpts-periodic-outputs = <2>;
> };
> };
> +
> + fss: bus@47000000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
make dtbs W=12
Warning (unit_address_vs_reg): /bus@100000/bus@28380000/bus@47000000: node has a unit name, but no reg or ranges property
> + ospi0: spi@47040000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47040000 0x00 0x100>,
> + <0x5 0x0000000 0x1 0x0000000>;
Also, please follow existing convention
<0x05 0x00000000 0x01 0x0000000>;
> + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 109 5>;
> + assigned-clocks = <&k3_clks 109 5>;
> + assigned-clock-parents = <&k3_clks 109 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ospi1: spi@47050000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47050000 0x00 0x100>,
> + <0x7 0x0000000 0x1 0x0000000>;
<0x07 0x00000000 0x01 0x0000000>;
> + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 110 5>;
> + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + };
> };
next prev parent reply other threads:[~2023-01-26 12:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
2023-01-26 12:24 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
2023-01-26 12:26 ` Vignesh Raghavendra [this message]
2023-01-23 9:57 ` [PATCH v8 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b61a183e-7316-0cfc-0118-b0cfeea1577f@ti.com \
--to=vigneshr@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=r-gunasekaran@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-vadapalli@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®