Re: [PATCH v2 2/5] dt-bindings: media: qcom,sm8150-camss: Add SM8150 CAMSS

[Krzysztof Kozlowski <krzk@kernel.org>]

On 06/11/2026 04:24, Andrew Gigena via B4 Relay wrote:
> +---
> +$id: http://devicetree.org/schemas/media/qcom,sm8150-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM8150 Camera Subsystem (CAMSS)
> +
> +maintainers:
> +  - Andrew Gigena <mail@andrewgigena.dev>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
> +
> +properties:
> +  compatible:
> +    const: qcom,sm8150-camss
> +

Missing reg and reg-names.


> +  clocks:
> +    minItems: 27
> +    maxItems: 27
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +      - const: cpas_ahb
> +      - const: csiphy0
> +      - const: csiphy0_timer
> +      - const: csiphy1
> +      - const: csiphy1_timer
> +      - const: csiphy2
> +      - const: csiphy2_timer
> +      - const: csiphy3
> +      - const: csiphy3_timer
> +      - const: vfe0_axi
> +      - const: vfe0
> +      - const: vfe0_cphy_rx
> +      - const: vfe0_csid
> +      - const: vfe1_axi
> +      - const: vfe1
> +      - const: vfe1_cphy_rx
> +      - const: vfe1_csid
> +      - const: vfe_lite0
> +      - const: vfe_lite0_cphy_rx
> +      - const: vfe_lite0_csid
> +      - const: vfe_lite1
> +      - const: vfe_lite1_cphy_rx
> +      - const: vfe_lite1_csid
> +      - const: gcc_ahb
> +      - const: gcc_axi_hf
> +      - const: gcc_axi_sf
> +
> +  interrupts:
> +    minItems: 12
> +    maxItems: 12
> +
> +  interrupt-names:
> +    items:
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: csiphy3
> +      - const: vfe0
> +      - const: csid0
> +      - const: vfe1
> +      - const: csid1
> +      - const: vfe_lite0
> +      - const: csid_lite0
> +      - const: vfe_lite1
> +      - const: csid_lite1

Which schema did you take as starting point / example? Which one has
similar order? Looks quite different than sm8250 and sm8650.

> +
> +  iommus:
> +    maxItems: 8
> +
> +  interconnects:
> +    maxItems: 4
> +
> +  interconnect-names:
> +    items:
> +      - const: cam_ahb
> +      - const: cam_hf_0_mnoc
> +      - const: cam_hf_1_mnoc

hf_1 should probably go to the end, to match similar devices schemas.

> +      - const: cam_sf_0_mnoc
> +
> +  power-domains:
> +    items:
> +      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: ife0
> +      - const: ife1
> +      - const: top
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    description:
> +      CSI input ports.
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY0.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              bus-type:
> +                enum:
> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY1.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              bus-type:
> +                enum:
> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> +            required:
> +              - data-lanes
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY2.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              bus-type:
> +                enum:
> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> +            required:
> +              - data-lanes
> +
> +      port@3:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY3.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              bus-type:
> +                enum:
> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> +            required:
> +              - data-lanes
> +
> +  reg:
> +    minItems: 12
> +    maxItems: 12
> +

Oh, oddly placed reg. Please move it to the top as expected by DTS
coding style.


> +  reg-names:
> +    items:
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: csiphy3
> +      - const: vfe0
> +      - const: csid0
> +      - const: vfe1
> +      - const: csid1
> +      - const: vfe_lite0
> +      - const: csid_lite0
> +      - const: vfe_lite1
> +      - const: csid_lite1
> +
> +  vdda-phy-supply:
> +    description:
> +      0.88V supply to CSIPHY IP blocks.
> +
> +  vdda-pll-supply:
> +    description:
> +      1.2V supply to CSIPHY IP blocks.
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - compatible
> +  - interconnects
> +  - interconnect-names
> +  - interrupts
> +  - interrupt-names
> +  - iommus
> +  - power-domains
> +  - power-domain-names
> +  - reg
> +  - reg-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
> +    #include <dt-bindings/clock/qcom,sm8150-camcc.h>
> +    #include <dt-bindings/interconnect/qcom,sm8150.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        camss: camss@ac65000 {

isp@

And drop unused label


> +            compatible = "qcom,sm8150-camss";
> +
> +            reg = <0 0xac65000 0 0x1000>,
> +              <0 0xac66000 0 0x1000>,
> +              <0 0xac67000 0 0x1000>,
> +              <0 0xac68000 0 0x1000>,
> +              <0 0xacaf000 0 0x4000>,
> +              <0 0xacb3000 0 0x1000>,
> +              <0 0xacb6000 0 0x4000>,
> +              <0 0xacba000 0 0x1000>,
> +              <0 0xacc4000 0 0x4000>,
> +              <0 0xacc8000 0 0x1000>,
> +              <0 0xaccb000 0 0x4000>,
> +              <0 0xaccf000 0 0x1000>;
> +
> +            reg-names = "csiphy0",
> +              "csiphy1",
> +              "csiphy2",
> +              "csiphy3",

All this looks unaligned.


Best regards,
Krzysztof