* 2.6.23-rc3 issues: AMD64 laptop hard-reboots soon after executing init
@ 2007-08-23 22:47 James Ausmus
2007-08-28 20:28 ` James Ausmus
0 siblings, 1 reply; 2+ messages in thread
From: James Ausmus @ 2007-08-23 22:47 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1114 bytes --]
That pretty much sums it up - It's an x86_64 system, I pulled my
2.6.20 .config file over, verified settings in make menuconfig, built
it, and, if I use my normal init system (Gentoo distro), the laptop
does a hard reboot just a little bit before I would hit a login
prompt. If I append init=/bin/bash, I get the same behaviour after
about the same time (but I do get a bash prompt). I have tried several
different configurations (mostly playing around with ACPI/Power
Management and company), but I haven't been able to track it down. No
oops messages, nothing informational (that I've been able to see), no
warning, doesn't matter if it's just idle or if I'm doing something -
I just suddenly get hard rebooted (no controlled shutdown, the screen
just goes blank, and suddenly I'm back at the BIOS memory test
screen).
I'm not sure what will be useful for tracking this down, so I've
attached several things - dmesg output from 2.6.20 (good) and
2.6.23-rc3, and my .config files from 2.6.20 and 2.6.23-rc3.
Any other information needed? Any suggestions what to
enable/disable/etc in the configuration?
-James
[-- Attachment #2: config-2.6.20 --]
[-- Type: application/octet-stream, Size: 40037 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-gentoo-r4
# Fri Mar 30 11:14:20 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_BLK_DEV_DM_BBR is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_TIPAR=y
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
# CONFIG_FB_VESA_TNG is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y
# CONFIG_FB_SPLASH is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID Devices
#
CONFIG_HID=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_SQUASHFS_VMALLOC is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
[-- Attachment #3: config-2.6.23-rc3 --]
[-- Type: application/octet-stream, Size: 37165 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc3
# Thu Aug 23 10:22:07 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_NR_QUICK=2
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_NR_CPUS=2
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_TIPAR=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_DS1682=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_TUNER_TEA5761 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Attachment #4: dmesg-2.6.20 --]
[-- Type: application/octet-stream, Size: 38109 bytes --]
Aug 23 09:50:05 charles syslog-ng[3322]: syslog-ng starting up; version='2.0.5'
Aug 23 09:50:05 charles Linux version 2.6.20-gentoo-r4 (root@charles) (gcc version 4.1.2 20070214 ( (gdc 0.23, using dmd 1.007)) (Gentoo 4.1.2)) #1 SMP PREEMPT Fri Mar 30 11:21:42 UTC 2007
Aug 23 09:50:05 charles Command line: BOOT_IMAGE=Gentoo.20-r4.1 ro root=804 video=vesafb:ypan,mtrr:2
Aug 23 09:50:05 charles BIOS-provided physical RAM map:
Aug 23 09:50:05 charles BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
Aug 23 09:50:05 charles BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
Aug 23 09:50:05 charles BIOS-e820: 00000000000c2000 - 00000000000d4000 (reserved)
Aug 23 09:50:05 charles BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Aug 23 09:50:05 charles BIOS-e820: 0000000000100000 - 000000007ff00000 (usable)
Aug 23 09:50:05 charles BIOS-e820: 000000007ff00000 - 000000007ff13000 (ACPI data)
Aug 23 09:50:05 charles BIOS-e820: 000000007ff13000 - 000000007ff80000 (ACPI NVS)
Aug 23 09:50:05 charles BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
Aug 23 09:50:05 charles BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Aug 23 09:50:05 charles BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Aug 23 09:50:05 charles BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
Aug 23 09:50:05 charles Entering add_active_range(0, 0, 155) 0 entries of 256 used
Aug 23 09:50:05 charles Entering add_active_range(0, 256, 524032) 1 entries of 256 used
Aug 23 09:50:05 charles end_pfn_map = 1048576
Aug 23 09:50:05 charles DMI present.
Aug 23 09:50:05 charles ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7220
Aug 23 09:50:05 charles ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000007ff0e649
Aug 23 09:50:05 charles ACPI: FADT (v001 CLEVO PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x000000007ff12d1c
Aug 23 09:50:05 charles ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000007ff12d90
Aug 23 09:50:05 charles ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000007ff12f5a
Aug 23 09:50:05 charles ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000007ff12fc4
Aug 23 09:50:05 charles ACPI: DSDT (v001 CLEVO PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
Aug 23 09:50:05 charles Entering add_active_range(0, 0, 155) 0 entries of 256 used
Aug 23 09:50:05 charles Entering add_active_range(0, 256, 524032) 1 entries of 256 used
Aug 23 09:50:05 charles Zone PFN ranges:
Aug 23 09:50:05 charles DMA 0 -> 4096
Aug 23 09:50:05 charles DMA32 4096 -> 1048576
Aug 23 09:50:05 charles Normal 1048576 -> 1048576
Aug 23 09:50:05 charles early_node_map[2] active PFN ranges
Aug 23 09:50:05 charles 0: 0 -> 155
Aug 23 09:50:05 charles 0: 256 -> 524032
Aug 23 09:50:05 charles On node 0 totalpages: 523931
Aug 23 09:50:05 charles DMA zone: 56 pages used for memmap
Aug 23 09:50:05 charles DMA zone: 1562 pages reserved
Aug 23 09:50:05 charles DMA zone: 2377 pages, LIFO batch:0
Aug 23 09:50:05 charles DMA32 zone: 7108 pages used for memmap
Aug 23 09:50:05 charles DMA32 zone: 512828 pages, LIFO batch:31
Aug 23 09:50:05 charles Normal zone: 0 pages used for memmap
Aug 23 09:50:05 charles ACPI: PM-Timer IO Port: 0x4008
Aug 23 09:50:05 charles ACPI: Local APIC address 0xfee00000
Aug 23 09:50:05 charles ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 23 09:50:05 charles Processor #0 (Bootup-CPU)
Aug 23 09:50:05 charles ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 23 09:50:05 charles Processor #1
Aug 23 09:50:05 charles ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 23 09:50:05 charles ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 23 09:50:05 charles ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 23 09:50:05 charles IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Aug 23 09:50:05 charles ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
Aug 23 09:50:05 charles IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
Aug 23 09:50:05 charles ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Aug 23 09:50:05 charles ACPI: IRQ0 used by override.
Aug 23 09:50:05 charles ACPI: IRQ2 used by override.
Aug 23 09:50:05 charles ACPI: IRQ10 used by override.
Aug 23 09:50:05 charles Setting APIC routing to physical flat
Aug 23 09:50:05 charles Using ACPI (MADT) for SMP configuration information
Aug 23 09:50:05 charles Nosave address range: 000000000009b000 - 00000000000a0000
Aug 23 09:50:05 charles Nosave address range: 00000000000a0000 - 00000000000c2000
Aug 23 09:50:05 charles Nosave address range: 00000000000c2000 - 00000000000d4000
Aug 23 09:50:05 charles Nosave address range: 00000000000d4000 - 00000000000dc000
Aug 23 09:50:05 charles Nosave address range: 00000000000dc000 - 0000000000100000
Aug 23 09:50:05 charles Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Aug 23 09:50:05 charles SMP: Allowing 2 CPUs, 0 hotplug CPUs
Aug 23 09:50:05 charles PERCPU: Allocating 32128 bytes of per cpu data
Aug 23 09:50:05 charles Built 1 zonelists. Total pages: 515205
Aug 23 09:50:05 charles Kernel command line: BOOT_IMAGE=Gentoo.20-r4.1 ro root=804 video=vesafb:ypan,mtrr:2
Aug 23 09:50:05 charles Initializing CPU#0
Aug 23 09:50:05 charles PID hash table entries: 4096 (order: 12, 32768 bytes)
Aug 23 09:50:05 charles Console: colour dummy device 80x25
Aug 23 09:50:05 charles Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 23 09:50:05 charles Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 23 09:50:05 charles Checking aperture...
Aug 23 09:50:05 charles CPU 0: aperture @ b0000000 size 256 MB
Aug 23 09:50:05 charles Memory: 2057476k/2096128k available (3793k kernel code, 38156k reserved, 1655k data, 208k init)
Aug 23 09:50:05 charles Calibrating delay using timer specific routine.. 4404.75 BogoMIPS (lpj=2202378)
Aug 23 09:50:05 charles Mount-cache hash table entries: 256
Aug 23 09:50:05 charles CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 23 09:50:05 charles CPU: L2 Cache: 1024K (64 bytes/line)
Aug 23 09:50:05 charles CPU: Physical Processor ID: 0
Aug 23 09:50:05 charles CPU: Processor Core ID: 0
Aug 23 09:50:05 charles SMP alternatives: switching to UP code
Aug 23 09:50:05 charles ACPI: Core revision 20060707
Aug 23 09:50:05 charles Using local APIC timer interrupts.
Aug 23 09:50:05 charles result 12500619
Aug 23 09:50:05 charles Detected 12.500 MHz APIC timer.
Aug 23 09:50:05 charles SMP alternatives: switching to SMP code
Aug 23 09:50:05 charles Booting processor 1/2 APIC 0x1
Aug 23 09:50:05 charles Initializing CPU#1
Aug 23 09:50:05 charles Calibrating delay using timer specific routine.. 4399.51 BogoMIPS (lpj=2199759)
Aug 23 09:50:05 charles CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 23 09:50:05 charles CPU: L2 Cache: 1024K (64 bytes/line)
Aug 23 09:50:05 charles CPU: Physical Processor ID: 0
Aug 23 09:50:05 charles CPU: Processor Core ID: 1
Aug 23 09:50:05 charles AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
Aug 23 09:50:05 charles CPU 1: Syncing TSC to CPU 0.
Aug 23 09:50:05 charles CPU 1: synchronized TSC with CPU 0 (last diff -78 cycles, maxerr 589 cycles)
Aug 23 09:50:05 charles Brought up 2 CPUs
Aug 23 09:50:05 charles testing NMI watchdog ... OK.
Aug 23 09:50:05 charles Disabling vsyscall due to use of PM timer
Aug 23 09:50:05 charles time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
Aug 23 09:50:05 charles time.c: Detected 2200.105 MHz processor.
Aug 23 09:50:05 charles migration_cost=420
Aug 23 09:50:05 charles NET: Registered protocol family 16
Aug 23 09:50:05 charles ACPI: bus type pci registered
Aug 23 09:50:05 charles PCI: Using MMCONFIG at e0000000
Aug 23 09:50:05 charles PCI: No mmconfig possible on device 00:18
Aug 23 09:50:05 charles ACPI: Interpreter enabled
Aug 23 09:50:05 charles ACPI: Using IOAPIC for interrupt routing
Aug 23 09:50:05 charles ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 23 09:50:05 charles PCI: Probing PCI hardware (bus 00)
Aug 23 09:50:05 charles 0000:00:0f.1: cannot adjust BAR0 (not I/O)
Aug 23 09:50:05 charles 0000:00:0f.1: cannot adjust BAR1 (not I/O)
Aug 23 09:50:05 charles 0000:00:0f.1: cannot adjust BAR2 (not I/O)
Aug 23 09:50:05 charles 0000:00:0f.1: cannot adjust BAR3 (not I/O)
Aug 23 09:50:05 charles Boot video device is 0000:02:00.0
Aug 23 09:50:05 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
Aug 23 09:50:05 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
Aug 23 09:50:05 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
Aug 23 09:50:05 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2C._PRT]
Aug 23 09:50:05 charles Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 23 09:50:05 charles pnp: PnP ACPI init
Aug 23 09:50:05 charles pnp: PnP ACPI: found 12 devices
Aug 23 09:50:05 charles SCSI subsystem initialized
Aug 23 09:50:05 charles libata version 2.00 loaded.
Aug 23 09:50:05 charles usbcore: registered new interface driver usbfs
Aug 23 09:50:05 charles usbcore: registered new interface driver hub
Aug 23 09:50:05 charles usbcore: registered new device driver usb
Aug 23 09:50:05 charles PCI: Using ACPI for IRQ routing
Aug 23 09:50:05 charles PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 23 09:50:05 charles PCI: Cannot allocate resource region 0 of device 0000:00:00.0
Aug 23 09:50:05 charles agpgart: Detected AGP bridge 0
Aug 23 09:50:05 charles agpgart: AGP aperture is 256M @ 0xb0000000
Aug 23 09:50:05 charles pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
Aug 23 09:50:05 charles pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved
Aug 23 09:50:05 charles pnp: 00:06: ioport range 0x4000-0x407f could not be reserved
Aug 23 09:50:05 charles pnp: 00:06: ioport range 0x4100-0x411f has been reserved
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 20 (level, low) -> IRQ 20
Aug 23 09:50:05 charles ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d2206000-d22067ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 23 09:50:05 charles PCI: Bridge: 0000:00:01.0
Aug 23 09:50:05 charles IO window: disabled.
Aug 23 09:50:05 charles MEM window: disabled.
Aug 23 09:50:05 charles PREFETCH window: disabled.
Aug 23 09:50:05 charles PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:02:00.0
Aug 23 09:50:05 charles PCI: Bridge: 0000:00:02.0
Aug 23 09:50:05 charles IO window: 5000-5fff
Aug 23 09:50:05 charles MEM window: d0000000-d1ffffff
Aug 23 09:50:05 charles PREFETCH window: c0000000-cfffffff
Aug 23 09:50:05 charles PCI: Bridge: 0000:00:03.0
Aug 23 09:50:05 charles IO window: disabled.
Aug 23 09:50:05 charles MEM window: disabled.
Aug 23 09:50:05 charles PREFETCH window: disabled.
Aug 23 09:50:05 charles PCI: Bridge: 0000:00:03.2
Aug 23 09:50:05 charles IO window: disabled.
Aug 23 09:50:05 charles MEM window: disabled.
Aug 23 09:50:05 charles PREFETCH window: disabled.
Aug 23 09:50:05 charles PCI: Bus 5, cardbus bridge: 0000:00:05.0
Aug 23 09:50:05 charles IO window: 00002400-000024ff
Aug 23 09:50:05 charles IO window: 00002800-000028ff
Aug 23 09:50:05 charles PREFETCH window: 88000000-8bffffff
Aug 23 09:50:05 charles MEM window: 8c000000-8fffffff
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:02.0 to 64
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:03.0 to 64
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 31 (level, low) -> IRQ 31
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:03.2 to 64
Aug 23 09:50:05 charles PCI: Enabling device 0000:00:05.0 (0000 -> 0003)
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 18 (level, low) -> IRQ 18
Aug 23 09:50:05 charles NET: Registered protocol family 2
Aug 23 09:50:05 charles IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Aug 23 09:50:05 charles TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Aug 23 09:50:05 charles TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 23 09:50:05 charles TCP: Hash tables configured (established 262144 bind 65536)
Aug 23 09:50:05 charles TCP reno registered
Aug 23 09:50:05 charles squashfs: version 3.2 (2007/01/02) Phillip Lougher
Aug 23 09:50:05 charles Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 23 09:50:05 charles NTFS driver 2.1.28 [Flags: R/W].
Aug 23 09:50:05 charles fuse init (API version 7.8)
Aug 23 09:50:05 charles io scheduler noop registered
Aug 23 09:50:05 charles io scheduler deadline registered
Aug 23 09:50:05 charles io scheduler cfq registered (default)
Aug 23 09:50:05 charles PCI: Bypassing VIA 8237 APIC De-Assert Message
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:02.0 to 64
Aug 23 09:50:05 charles assign_interrupt_mode Found MSI capability
Aug 23 09:50:05 charles Allocate Port Service[0000:00:02.0:pcie00]
Aug 23 09:50:05 charles Allocate Port Service[0000:00:02.0:pcie01]
Aug 23 09:50:05 charles Allocate Port Service[0000:00:02.0:pcie03]
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:03.0 to 64
Aug 23 09:50:05 charles assign_interrupt_mode Found MSI capability
Aug 23 09:50:05 charles Allocate Port Service[0000:00:03.0:pcie00]
Aug 23 09:50:05 charles Allocate Port Service[0000:00:03.0:pcie01]
Aug 23 09:50:05 charles Allocate Port Service[0000:00:03.0:pcie03]
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:03.2 to 64
Aug 23 09:50:05 charles assign_interrupt_mode Found MSI capability
Aug 23 09:50:05 charles Allocate Port Service[0000:00:03.2:pcie00]
Aug 23 09:50:05 charles Allocate Port Service[0000:00:03.2:pcie01]
Aug 23 09:50:05 charles Allocate Port Service[0000:00:03.2:pcie03]
Aug 23 09:50:05 charles Evaluate _OSC Set fails. Status = 0x0005
Aug 23 09:50:05 charles Evaluate _OSC Set fails. Status = 0x0005
Aug 23 09:50:05 charles aer_init: AER service init fails - Run ACPI _OSC fails
Aug 23 09:50:05 charles aer: probe of 0000:00:02.0:pcie01 failed with error 2
Aug 23 09:50:05 charles Evaluate _OSC Set fails. Status = 0x0005
Aug 23 09:50:05 charles Evaluate _OSC Set fails. Status = 0x0005
Aug 23 09:50:05 charles aer_init: AER service init fails - Run ACPI _OSC fails
Aug 23 09:50:05 charles aer: probe of 0000:00:03.0:pcie01 failed with error 2
Aug 23 09:50:05 charles Evaluate _OSC Set fails. Status = 0x0005
Aug 23 09:50:05 charles Evaluate _OSC Set fails. Status = 0x0005
Aug 23 09:50:05 charles aer_init: AER service init fails - Run ACPI _OSC fails
Aug 23 09:50:05 charles aer: probe of 0000:00:03.2:pcie01 failed with error 2
Aug 23 09:50:05 charles lp: driver loaded but no devices found
Aug 23 09:50:05 charles tipar: parallel link cable driver, version 1.19
Aug 23 09:50:05 charles Real Time Clock Driver v1.12ac
Aug 23 09:50:05 charles smapi::smapi_init, ERROR invalid usSmapiID
Aug 23 09:50:05 charles mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
Aug 23 09:50:05 charles mwave: mwavedd::mwave_init: Error: Failed to initialize board data
Aug 23 09:50:05 charles mwave: mwavedd::mwave_init: Error: Failed to initialize
Aug 23 09:50:05 charles Linux agpgart interface v0.101 (c) Dave Jones
Aug 23 09:50:05 charles Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Aug 23 09:50:05 charles Hangcheck: Using monotonic_clock().
Aug 23 09:50:05 charles vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010200000, using 10240k, total 262144k
Aug 23 09:50:05 charles vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Aug 23 09:50:05 charles vesafb: scrolling: redraw
Aug 23 09:50:05 charles vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Aug 23 09:50:05 charles Console: switching to colour frame buffer device 160x64
Aug 23 09:50:05 charles fb0: VESA VGA frame buffer device
Aug 23 09:50:05 charles ACPI: AC Adapter [ADP0] (on-line)
Aug 23 09:50:05 charles ACPI: Battery Slot [BAT0] (battery present)
Aug 23 09:50:05 charles input: Power Button (CM) as /class/input/input0
Aug 23 09:50:05 charles ACPI: Power Button (CM) [PWRB]
Aug 23 09:50:05 charles input: Lid Switch as /class/input/input1
Aug 23 09:50:05 charles ACPI: Lid Switch [LID]
Aug 23 09:50:05 charles input: Sleep Button (CM) as /class/input/input2
Aug 23 09:50:05 charles ACPI: Sleep Button (CM) [SLPB]
Aug 23 09:50:05 charles ACPI: Video Device [NVD] (multi-head: yes rom: no post: no)
Aug 23 09:50:05 charles Using specific hotkey driver
Aug 23 09:50:05 charles ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f5000048a22e]
Aug 23 09:50:05 charles ACPI: Thermal Zone [THM0] (60 C)
Aug 23 09:50:05 charles Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 23 09:50:05 charles serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 23 09:50:05 charles 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 23 09:50:05 charles parport: PnPBIOS parport detected.
Aug 23 09:50:05 charles parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Aug 23 09:50:05 charles tipar0: using parport0 (interrupt-driven)
Aug 23 09:50:05 charles tipar0: link cable not found
Aug 23 09:50:05 charles lp0: using parport0 (interrupt-driven).
Aug 23 09:50:05 charles loop: loaded (max 8 devices)
Aug 23 09:50:05 charles PPP generic driver version 2.4.2
Aug 23 09:50:05 charles PPP Deflate Compression module registered
Aug 23 09:50:05 charles PPP BSD Compression module registered
Aug 23 09:50:05 charles PPP MPPE Compression module registered
Aug 23 09:50:05 charles tun: Universal TUN/TAP device driver, 1.6
Aug 23 09:50:05 charles tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Aug 23 09:50:05 charles r8169 Gigabit Ethernet driver 2.2LK loaded
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
Aug 23 09:50:05 charles eth0: RTL8169sb/8110sb at 0xffffc20000056800, 00:90:f5:48:a2:2e, IRQ 19
Aug 23 09:50:05 charles Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 23 09:50:05 charles ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 23 09:50:05 charles VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
Aug 23 09:50:05 charles VP_IDE: chipset revision 6
Aug 23 09:50:05 charles VP_IDE: not 100% native mode: will probe irqs later
Aug 23 09:50:05 charles VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Aug 23 09:50:05 charles ide0: BM-DMA at 0x2090-0x2097, BIOS settings: hda:pio, hdb:pio
Aug 23 09:50:05 charles ide1: BM-DMA at 0x2098-0x209f, BIOS settings: hdc:DMA, hdd:pio
Aug 23 09:50:05 charles Probing IDE interface ide0...
Aug 23 09:50:05 charles Probing IDE interface ide1...
Aug 23 09:50:05 charles hdc: TSSTcorpCDW/DVD TS-L462C, ATAPI CD/DVD-ROM drive
Aug 23 09:50:05 charles ide1 at 0x170-0x177,0x376 on irq 15
Aug 23 09:50:05 charles Probing IDE interface ide0...
Aug 23 09:50:05 charles hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
Aug 23 09:50:05 charles Uniform CD-ROM driver Revision: 3.20
Aug 23 09:50:05 charles sata_via 0000:00:0f.0: version 2.0
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
Aug 23 09:50:05 charles sata_via 0000:00:0f.0: routed to hard irq line 11
Aug 23 09:50:05 charles ata1: SATA max UDMA/133 cmd 0x20B0 ctl 0x20A6 bmdma 0x2080 irq 20
Aug 23 09:50:05 charles ata2: SATA max UDMA/133 cmd 0x20A8 ctl 0x20A2 bmdma 0x2088 irq 20
Aug 23 09:50:05 charles scsi0 : sata_via
Aug 23 09:50:05 charles ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 23 09:50:05 charles ATA: abnormal status 0x7F on port 0x20B7
Aug 23 09:50:05 charles ATA: abnormal status 0x7F on port 0x20B7
Aug 23 09:50:05 charles ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/32)
Aug 23 09:50:05 charles ata1.00: ata1: dev 0 multi count 16
Aug 23 09:50:05 charles ata1.00: configured for UDMA/133
Aug 23 09:50:05 charles scsi1 : sata_via
Aug 23 09:50:05 charles ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 23 09:50:05 charles ATA: abnormal status 0x7F on port 0x20AF
Aug 23 09:50:05 charles ATA: abnormal status 0x7F on port 0x20AF
Aug 23 09:50:05 charles Losing some ticks... checking if CPU frequency changed.
Aug 23 09:50:05 charles ata2.00: ATA-7, max UDMA7, 156368016 sectors: LBA48 NCQ (depth 0/32)
Aug 23 09:50:05 charles ata2.00: ata2: dev 0 multi count 16
Aug 23 09:50:05 charles ata2.00: configured for UDMA/133
Aug 23 09:50:05 charles scsi 0:0:0:0: Direct-Access ATA ST9120821AS 3.06 PQ: 0 ANSI: 5
Aug 23 09:50:05 charles SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Aug 23 09:50:05 charles sda: Write Protect is off
Aug 23 09:50:05 charles sda: Mode Sense: 00 3a 00 00
Aug 23 09:50:05 charles SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:50:05 charles SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Aug 23 09:50:05 charles sda: Write Protect is off
Aug 23 09:50:05 charles sda: Mode Sense: 00 3a 00 00
Aug 23 09:50:05 charles SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:50:05 charles sda: sda1 sda2 sda3 sda4
Aug 23 09:50:05 charles sd 0:0:0:0: Attached scsi disk sda
Aug 23 09:50:05 charles sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 23 09:50:05 charles scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM080JI YC10 PQ: 0 ANSI: 5
Aug 23 09:50:05 charles SCSI device sdb: 156368016 512-byte hdwr sectors (80060 MB)
Aug 23 09:50:05 charles sdb: Write Protect is off
Aug 23 09:50:05 charles sdb: Mode Sense: 00 3a 00 00
Aug 23 09:50:05 charles SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:50:05 charles SCSI device sdb: 156368016 512-byte hdwr sectors (80060 MB)
Aug 23 09:50:05 charles sdb: Write Protect is off
Aug 23 09:50:05 charles sdb: Mode Sense: 00 3a 00 00
Aug 23 09:50:05 charles SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:50:05 charles sdb: sdb1 sdb2 sdb3 sdb4
Aug 23 09:50:05 charles sd 1:0:0:0: Attached scsi disk sdb
Aug 23 09:50:05 charles sd 1:0:0:0: Attached scsi generic sg1 type 0
Aug 23 09:50:05 charles video1394: Installed video1394 module
Aug 23 09:50:05 charles ieee1394: raw1394: /dev/raw1394 device initialized
Aug 23 09:50:05 charles parport0: AVR Butterfly
Aug 23 09:50:05 charles Yenta: CardBus bridge found at 0000:00:05.0 [1558:0901]
Aug 23 09:50:05 charles Yenta: Using CSCINT to route CSC interrupts to PCI
Aug 23 09:50:05 charles Yenta: Routing CardBus interrupts to PCI
Aug 23 09:50:05 charles Yenta TI: socket 0000:00:05.0, mfunc 0x00001002, devctl 0x64
Aug 23 09:50:05 charles Yenta: ISA IRQ mask 0x0a38, PCI irq 18
Aug 23 09:50:05 charles Socket status: 30000006
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:50:05 charles ehci_hcd 0000:00:10.4: EHCI Host Controller
Aug 23 09:50:05 charles ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Aug 23 09:50:05 charles ehci_hcd 0000:00:10.4: irq 21, io mem 0xd2206c00
Aug 23 09:50:05 charles ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 23 09:50:05 charles usb usb1: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles hub 1-0:1.0: USB hub found
Aug 23 09:50:05 charles hub 1-0:1.0: 8 ports detected
Aug 23 09:50:05 charles USB Universal Host Controller Interface driver v3.0
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.0: UHCI Host Controller
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.0: irq 21, io base 0x00002000
Aug 23 09:50:05 charles usb usb2: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles hub 2-0:1.0: USB hub found
Aug 23 09:50:05 charles hub 2-0:1.0: 2 ports detected
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.1: UHCI Host Controller
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.1: irq 21, io base 0x00002020
Aug 23 09:50:05 charles usb usb3: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles hub 3-0:1.0: USB hub found
Aug 23 09:50:05 charles hub 3-0:1.0: 2 ports detected
Aug 23 09:50:05 charles usb 1-2: new high speed USB device using ehci_hcd and address 2
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.2: UHCI Host Controller
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.2: irq 21, io base 0x00002040
Aug 23 09:50:05 charles usb usb4: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles hub 4-0:1.0: USB hub found
Aug 23 09:50:05 charles hub 4-0:1.0: 2 ports detected
Aug 23 09:50:05 charles usb 1-2: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.3: UHCI Host Controller
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Aug 23 09:50:05 charles uhci_hcd 0000:00:10.3: irq 21, io base 0x00002060
Aug 23 09:50:05 charles usb usb5: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles hub 5-0:1.0: USB hub found
Aug 23 09:50:05 charles hub 5-0:1.0: 2 ports detected
Aug 23 09:50:05 charles usb 1-4: new high speed USB device using ehci_hcd and address 4
Aug 23 09:50:05 charles usb 1-4: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles usb 3-1: new low speed USB device using uhci_hcd and address 2
Aug 23 09:50:05 charles usb 3-1: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles usb 4-1: new low speed USB device using uhci_hcd and address 2
Aug 23 09:50:05 charles usb 4-1: configuration #1 chosen from 1 choice
Aug 23 09:50:05 charles usbcore: registered new interface driver usblp
Aug 23 09:50:05 charles drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Aug 23 09:50:05 charles Initializing USB Mass Storage driver...
Aug 23 09:50:05 charles scsi2 : SCSI emulation for USB Mass Storage devices
Aug 23 09:50:05 charles usb-storage: device found at 4
Aug 23 09:50:05 charles usb-storage: waiting for device to settle before scanning
Aug 23 09:50:05 charles usbcore: registered new interface driver usb-storage
Aug 23 09:50:05 charles USB Mass Storage support registered.
Aug 23 09:50:05 charles input: HID 1267:0103 as /class/input/input3
Aug 23 09:50:05 charles input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:10.1-1
Aug 23 09:50:05 charles input: HID 1267:0103 as /class/input/input4
Aug 23 09:50:05 charles input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:10.1-1
Aug 23 09:50:05 charles input: Logitech USB Receiver as /class/input/input5
Aug 23 09:50:05 charles input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.2-1
Aug 23 09:50:05 charles usbcore: registered new interface driver usbhid
Aug 23 09:50:05 charles drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug 23 09:50:05 charles PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 23 09:50:05 charles i8042.c: Detected active multiplexing controller, rev 1.1.
Aug 23 09:50:05 charles serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 23 09:50:05 charles serio: i8042 AUX0 port at 0x60,0x64 irq 12
Aug 23 09:50:05 charles serio: i8042 AUX1 port at 0x60,0x64 irq 12
Aug 23 09:50:05 charles serio: i8042 AUX2 port at 0x60,0x64 irq 12
Aug 23 09:50:05 charles serio: i8042 AUX3 port at 0x60,0x64 irq 12
Aug 23 09:50:05 charles mice: PS/2 mouse device common for all mice
Aug 23 09:50:05 charles input: AT Translated Set 2 keyboard as /class/input/input6
Aug 23 09:50:05 charles i2c /dev entries driver
Aug 23 09:50:05 charles device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Aug 23 09:50:05 charles Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
Aug 23 09:50:05 charles ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:11.5 to 64
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
Aug 23 09:50:05 charles PCI: Setting latency timer of device 0000:00:11.6 to 64
Aug 23 09:50:05 charles Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
Aug 23 09:50:05 charles input: SynPS/2 Synaptics TouchPad as /class/input/input7
Aug 23 09:50:05 charles MC'97 1 converters and GPIO not ready (0xff00)
Aug 23 09:50:05 charles ALSA device list:
Aug 23 09:50:05 charles #0: VIA 8237 with ALC850 at 0x1800, irq 22
Aug 23 09:50:05 charles #1: VIA 82XX modem at 0x1c00, irq 22
Aug 23 09:50:05 charles IPv4 over IPv4 tunneling driver
Aug 23 09:50:05 charles GRE over IPv4 tunneling driver
Aug 23 09:50:05 charles TCP cubic registered
Aug 23 09:50:05 charles Initializing XFRM netlink socket
Aug 23 09:50:05 charles NET: Registered protocol family 1
Aug 23 09:50:05 charles NET: Registered protocol family 17
Aug 23 09:50:05 charles NET: Registered protocol family 15
Aug 23 09:50:05 charles SCTP: Hash tables configured (established 65536 bind 65536)
Aug 23 09:50:05 charles powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00)
Aug 23 09:50:05 charles powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8
Aug 23 09:50:05 charles powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa
Aug 23 09:50:05 charles powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc
Aug 23 09:50:05 charles powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
Aug 23 09:50:05 charles ACPI: (supports S0 S3 S4 S5)
Aug 23 09:50:05 charles ReiserFS: sda4: found reiserfs format "3.6" with standard journal
Aug 23 09:50:05 charles ReiserFS: sda4: using ordered data mode
Aug 23 09:50:05 charles ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 23 09:50:05 charles ReiserFS: sda4: checking transaction log (sda4)
Aug 23 09:50:05 charles ReiserFS: sda4: Using r5 hash to sort names
Aug 23 09:50:05 charles VFS: Mounted root (reiserfs filesystem) readonly.
Aug 23 09:50:05 charles Freeing unused kernel memory: 208k freed
Aug 23 09:50:05 charles scsi 2:0:0:0: Direct-Access GENERIC USB Storage-CFC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:50:05 charles sd 2:0:0:0: Attached scsi removable disk sdc
Aug 23 09:50:05 charles sd 2:0:0:0: Attached scsi generic sg2 type 0
Aug 23 09:50:05 charles scsi 2:0:0:1: Direct-Access GENERIC USB Storage-SDC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:50:05 charles sd 2:0:0:1: Attached scsi removable disk sdd
Aug 23 09:50:05 charles sd 2:0:0:1: Attached scsi generic sg3 type 0
Aug 23 09:50:05 charles scsi 2:0:0:2: Direct-Access GENERIC USB Storage-SMC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:50:05 charles sd 2:0:0:2: Attached scsi removable disk sde
Aug 23 09:50:05 charles sd 2:0:0:2: Attached scsi generic sg4 type 0
Aug 23 09:50:05 charles scsi 2:0:0:3: Direct-Access GENERIC USB Storage-MSC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:50:05 charles sd 2:0:0:3: Attached scsi removable disk sdf
Aug 23 09:50:05 charles sd 2:0:0:3: Attached scsi generic sg5 type 0
Aug 23 09:50:05 charles usb-storage: device scan complete
Aug 23 09:50:05 charles ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
Aug 23 09:50:05 charles rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
Aug 23 09:50:05 charles udev: renamed network interface ra0 to wlan0
Aug 23 09:50:05 charles Adding 1959920k swap on /dev/sda3. Priority:-1 extents:1 across:1959920k
Aug 23 09:50:05 charles acpid: starting up
Aug 23 09:50:05 charles acpid: 4 rules loaded
Aug 23 09:50:07 charles rpc.statd[3578]: Version 1.1.0 Starting
Aug 23 09:50:10 charles acpid: client connected from 3835[0:0]
Aug 23 09:50:10 charles acpid: 1 client rule loaded
Aug 23 09:50:14 charles nvidia: module license 'NVIDIA' taints kernel.
Aug 23 09:50:15 charles ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
Aug 23 09:50:15 charles PCI: Setting latency timer of device 0000:02:00.0 to 64
Aug 23 09:50:15 charles NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007
Aug 23 09:50:16 charles sshd[3961]: Server listening on 0.0.0.0 port 22.
Aug 23 09:50:16 charles acpid: client connected from 3835[0:0]
Aug 23 09:50:16 charles acpid: 1 client rule loaded
Aug 23 09:50:16 charles acpid: received event "processor CPU0 00000080 00000000"
Aug 23 09:50:16 charles acpid: notifying client 3835[0:0]
Aug 23 09:50:16 charles acpid: notifying client 3835[0:0]
Aug 23 09:50:16 charles acpid: executing action "/etc/acpi/default.sh processor CPU0 00000080 00000000"
Aug 23 09:50:16 charles acpid: action exited with status 0
Aug 23 09:50:16 charles acpid: completed event "processor CPU0 00000080 00000000"
Aug 23 09:50:23 charles smbd[4087]: [2007/08/23 09:50:23, 0] printing/print_cups.c:cups_cache_reload(85)
Aug 23 09:50:23 charles smbd[4087]: Unable to connect to CUPS server localhost - Connection refused
Aug 23 09:50:23 charles smbd[4087]: [2007/08/23 09:50:23, 0] printing/print_cups.c:cups_cache_reload(85)
Aug 23 09:50:23 charles smbd[4087]: Unable to connect to CUPS server localhost - Connection refused
Aug 23 09:50:24 charles nmbd[4098]: [2007/08/23 09:50:24, 0] nmbd/nmbd_subnetdb.c:create_subnets(188)
Aug 23 09:50:24 charles nmbd[4098]: create_subnets: No local interfaces !
Aug 23 09:50:24 charles nmbd[4098]: [2007/08/23 09:50:24, 0] nmbd/nmbd_subnetdb.c:create_subnets(189)
Aug 23 09:50:24 charles nmbd[4098]: create_subnets: Waiting for an interface to appear ...
Aug 23 09:50:25 charles rc-scripts: Vmware Player is installed, but it has not been (correctly) configured
Aug 23 09:50:25 charles rc-scripts: for the running kernel.
Aug 23 09:50:25 charles rc-scripts: Please ensure that the modules have been compiled for this kernel:
Aug 23 09:50:25 charles rc-scripts: emerge --oneshot vmware-modules
Aug 23 09:50:25 charles rc-scripts: Also ensure Vmware Player has been configured:
Aug 23 09:50:25 charles rc-scripts: /opt/vmware/player/bin/vmware-config.pl
Aug 23 09:50:25 charles rc-scripts: VMware is not properly configured! See above.
Aug 23 09:50:37 charles r8169: eth0: link down
Aug 23 09:50:37 charles ifplugd(eth0)[4996]: ifplugd 0.28 initializing.
Aug 23 09:50:37 charles ifplugd(eth0)[4996]: Using interface eth0/00:90:F5:48:A2:2E with driver <r8169> (version: 2.2LK)
Aug 23 09:50:37 charles ifplugd(eth0)[4996]: Using detection mode: SIOCETHTOOL
Aug 23 09:50:37 charles ifplugd(eth0)[4996]: Initialization complete, link beat not detected.
Aug 23 09:50:38 charles rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
Aug 23 09:50:38 charles rt2500 EEPROM: 0 0 0 0 0 0 1 1 1 1 1 1 2 2 dBm Maximum
Aug 23 09:50:41 charles rc-scripts: Configuration not set for wlan0 - assuming DHCP
Aug 23 09:50:41 charles dhcpcd[5643]: wlan0: dhcpcd 3.1.4 starting
Aug 23 09:50:41 charles dhcpcd[5643]: wlan0: hardware address = 00:13:d3:75:0d:32
Aug 23 09:50:41 charles dhcpcd[5643]: wlan0: DUID = 00:01:00:01:0e:3b:24:04:00:13:d3:75:0d:32
Aug 23 09:50:41 charles dhcpcd[5643]: wlan0: broadcasting for a lease
Aug 23 09:50:42 charles dhcpcd[5643]: wlan0: offered 192.168.1.102 from 192.168.1.1
Aug 23 09:50:42 charles dhcpcd[5643]: wlan0: checking 192.168.1.102 is available on attached networks
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: leased 192.168.1.102 for 86400 seconds
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: no renewal time supplied, assuming 43200 seconds
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: no rebind time supplied, assuming 75600 seconds
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: adding IP address 192.168.1.102/24
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: adding route to 192.168.1.0/24 metric 2000
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: removing route to 192.168.1.0/24 metric 0
Aug 23 09:50:43 charles dhcpcd[5643]: wlan0: adding default route via 192.168.1.1 metric 2000
Aug 23 09:50:43 charles cron[5831]: (CRON) STARTUP (V5.0)
[-- Attachment #5: dmesg-2.6.23-rc3 --]
[-- Type: application/octet-stream, Size: 32085 bytes --]
Aug 23 09:38:22 charles syslog-ng[3344]: syslog-ng starting up; version='2.0.5'
Aug 23 09:38:22 charles Linux version 2.6.23-rc3 (root@charles) (gcc version 4.2.0 (Gentoo 4.2.0 p1.4)) #2 SMP PREEMPT Thu Aug 23 09:33:14 PDT 2007
Aug 23 09:38:22 charles Command line: BOOT_IMAGE=Gentoo.23_rc3.2 ro root=804 video=vesafb:ypan,mtrr:2
Aug 23 09:38:22 charles BIOS-provided physical RAM map:
Aug 23 09:38:22 charles BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
Aug 23 09:38:22 charles BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
Aug 23 09:38:22 charles BIOS-e820: 00000000000c2000 - 00000000000d4000 (reserved)
Aug 23 09:38:22 charles BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Aug 23 09:38:22 charles BIOS-e820: 0000000000100000 - 000000007ff00000 (usable)
Aug 23 09:38:22 charles BIOS-e820: 000000007ff00000 - 000000007ff13000 (ACPI data)
Aug 23 09:38:22 charles BIOS-e820: 000000007ff13000 - 000000007ff80000 (ACPI NVS)
Aug 23 09:38:22 charles BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
Aug 23 09:38:22 charles BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Aug 23 09:38:22 charles BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Aug 23 09:38:22 charles BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
Aug 23 09:38:22 charles Entering add_active_range(0, 0, 155) 0 entries of 256 used
Aug 23 09:38:22 charles Entering add_active_range(0, 256, 524032) 1 entries of 256 used
Aug 23 09:38:22 charles end_pfn_map = 1048576
Aug 23 09:38:22 charles DMI present.
Aug 23 09:38:22 charles ACPI: RSDP 000F7220, 0014 (r0 PTLTD )
Aug 23 09:38:22 charles ACPI: RSDT 7FF0E649, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
Aug 23 09:38:22 charles ACPI: FACP 7FF12D1C, 0074 (r1 CLEVO PTLTW 6040000 PTL_ F4240)
Aug 23 09:38:22 charles ACPI: DSDT 7FF0E67D, 469F (r1 CLEVO PTL_ACPI 6040000 MSFT 100000E)
Aug 23 09:38:22 charles ACPI: FACS 7FF13FC0, 0040
Aug 23 09:38:22 charles ACPI: SSDT 7FF12D90, 01CA (r1 PTLTD POWERNOW 6040000 LTP 1)
Aug 23 09:38:22 charles ACPI: APIC 7FF12F5A, 006A (r1 PTLTD APIC 6040000 LTP 0)
Aug 23 09:38:22 charles ACPI: MCFG 7FF12FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
Aug 23 09:38:22 charles Entering add_active_range(0, 0, 155) 0 entries of 256 used
Aug 23 09:38:22 charles Entering add_active_range(0, 256, 524032) 1 entries of 256 used
Aug 23 09:38:22 charles Zone PFN ranges:
Aug 23 09:38:22 charles DMA 0 -> 4096
Aug 23 09:38:22 charles DMA32 4096 -> 1048576
Aug 23 09:38:22 charles Normal 1048576 -> 1048576
Aug 23 09:38:22 charles Movable zone start PFN for each node
Aug 23 09:38:22 charles early_node_map[2] active PFN ranges
Aug 23 09:38:22 charles 0: 0 -> 155
Aug 23 09:38:22 charles 0: 256 -> 524032
Aug 23 09:38:22 charles On node 0 totalpages: 523931
Aug 23 09:38:22 charles DMA zone: 56 pages used for memmap
Aug 23 09:38:22 charles DMA zone: 1644 pages reserved
Aug 23 09:38:22 charles DMA zone: 2295 pages, LIFO batch:0
Aug 23 09:38:22 charles DMA32 zone: 7108 pages used for memmap
Aug 23 09:38:22 charles DMA32 zone: 512828 pages, LIFO batch:31
Aug 23 09:38:22 charles Normal zone: 0 pages used for memmap
Aug 23 09:38:22 charles Movable zone: 0 pages used for memmap
Aug 23 09:38:22 charles ACPI: PM-Timer IO Port: 0x4008
Aug 23 09:38:22 charles ACPI: Local APIC address 0xfee00000
Aug 23 09:38:22 charles ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 23 09:38:22 charles Processor #0 (Bootup-CPU)
Aug 23 09:38:22 charles ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 23 09:38:22 charles Processor #1
Aug 23 09:38:22 charles ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 23 09:38:22 charles ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 23 09:38:22 charles ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 23 09:38:22 charles IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Aug 23 09:38:22 charles ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
Aug 23 09:38:22 charles IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
Aug 23 09:38:22 charles ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Aug 23 09:38:22 charles ACPI: IRQ0 used by override.
Aug 23 09:38:22 charles ACPI: IRQ2 used by override.
Aug 23 09:38:22 charles ACPI: IRQ10 used by override.
Aug 23 09:38:22 charles Setting APIC routing to flat
Aug 23 09:38:22 charles Using ACPI (MADT) for SMP configuration information
Aug 23 09:38:22 charles swsusp: Registered nosave memory region: 000000000009b000 - 00000000000a0000
Aug 23 09:38:22 charles swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c2000
Aug 23 09:38:22 charles swsusp: Registered nosave memory region: 00000000000c2000 - 00000000000d4000
Aug 23 09:38:22 charles swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
Aug 23 09:38:22 charles swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Aug 23 09:38:22 charles Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Aug 23 09:38:22 charles SMP: Allowing 2 CPUs, 0 hotplug CPUs
Aug 23 09:38:22 charles PERCPU: Allocating 29920 bytes of per cpu data
Aug 23 09:38:22 charles Built 1 zonelists in Zone order. Total pages: 515123
Aug 23 09:38:22 charles Kernel command line: BOOT_IMAGE=Gentoo.23_rc3.2 ro root=804 video=vesafb:ypan,mtrr:2
Aug 23 09:38:22 charles Initializing CPU#0
Aug 23 09:38:22 charles PID hash table entries: 4096 (order: 12, 32768 bytes)
Aug 23 09:38:22 charles Marking TSC unstable due to TSCs unsynchronized
Aug 23 09:38:22 charles time.c: Detected 2200.188 MHz processor.
Aug 23 09:38:22 charles Console: colour dummy device 80x25
Aug 23 09:38:22 charles console [tty0] enabled
Aug 23 09:38:22 charles Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 23 09:38:22 charles Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 23 09:38:22 charles Checking aperture...
Aug 23 09:38:22 charles CPU 0: aperture @ b0000000 size 256 MB
Aug 23 09:38:22 charles Memory: 2057144k/2096128k available (3764k kernel code, 38480k reserved, 1659k data, 220k init)
Aug 23 09:38:22 charles Calibrating delay using timer specific routine.. 4404.05 BogoMIPS (lpj=2202026)
Aug 23 09:38:22 charles Mount-cache hash table entries: 256
Aug 23 09:38:22 charles CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 23 09:38:22 charles CPU: L2 Cache: 1024K (64 bytes/line)
Aug 23 09:38:22 charles CPU: Physical Processor ID: 0
Aug 23 09:38:22 charles CPU: Processor Core ID: 0
Aug 23 09:38:22 charles SMP alternatives: switching to UP code
Aug 23 09:38:22 charles ACPI: Core revision 20070126
Aug 23 09:38:22 charles Using local APIC timer interrupts.
Aug 23 09:38:22 charles result 12501089
Aug 23 09:38:22 charles Detected 12.501 MHz APIC timer.
Aug 23 09:38:22 charles SMP alternatives: switching to SMP code
Aug 23 09:38:22 charles Booting processor 1/2 APIC 0x1
Aug 23 09:38:22 charles Initializing CPU#1
Aug 23 09:38:22 charles Calibrating delay using timer specific routine.. 4399.58 BogoMIPS (lpj=2199790)
Aug 23 09:38:22 charles CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 23 09:38:22 charles CPU: L2 Cache: 1024K (64 bytes/line)
Aug 23 09:38:22 charles CPU: Physical Processor ID: 0
Aug 23 09:38:22 charles CPU: Processor Core ID: 1
Aug 23 09:38:22 charles AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
Aug 23 09:38:22 charles Brought up 2 CPUs
Aug 23 09:38:22 charles NET: Registered protocol family 16
Aug 23 09:38:22 charles ACPI: bus type pci registered
Aug 23 09:38:22 charles PCI: Using MMCONFIG at e0000000 - e03fffff
Aug 23 09:38:22 charles PCI: No mmconfig possible on device 00:18
Aug 23 09:38:22 charles ACPI: EC: Look up EC in DSDT
Aug 23 09:38:22 charles ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
Aug 23 09:38:22 charles ACPI: Interpreter enabled
Aug 23 09:38:22 charles ACPI: (supports S0 S3)
Aug 23 09:38:22 charles ACPI: Using IOAPIC for interrupt routing
Aug 23 09:38:22 charles ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
Aug 23 09:38:22 charles ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 23 09:38:22 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 23 09:38:22 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
Aug 23 09:38:22 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
Aug 23 09:38:22 charles ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2C._PRT]
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
Aug 23 09:38:22 charles Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 23 09:38:22 charles pnp: PnP ACPI init
Aug 23 09:38:22 charles ACPI: bus type pnp registered
Aug 23 09:38:22 charles pnp: PnP ACPI: found 12 devices
Aug 23 09:38:22 charles ACPI: ACPI bus type pnp unregistered
Aug 23 09:38:22 charles SCSI subsystem initialized
Aug 23 09:38:22 charles libata version 2.21 loaded.
Aug 23 09:38:22 charles usbcore: registered new interface driver usbfs
Aug 23 09:38:22 charles usbcore: registered new interface driver hub
Aug 23 09:38:22 charles usbcore: registered new device driver usb
Aug 23 09:38:22 charles PCI: Using ACPI for IRQ routing
Aug 23 09:38:22 charles PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 23 09:38:22 charles PCI: Cannot allocate resource region 0 of device 0000:00:00.0
Aug 23 09:38:22 charles agpgart: Detected AGP bridge 0
Aug 23 09:38:22 charles agpgart: AGP aperture is 256M @ 0xb0000000
Aug 23 09:38:22 charles pnp: 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
Aug 23 09:38:22 charles pnp: 00:05: iomem range 0xffee0000-0xffefffff has been reserved
Aug 23 09:38:22 charles pnp: 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved
Aug 23 09:38:22 charles pnp: 00:05: iomem range 0xfee00000-0xfee00fff could not be reserved
Aug 23 09:38:22 charles pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
Aug 23 09:38:22 charles pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved
Aug 23 09:38:22 charles pnp: 00:06: ioport range 0x4000-0x407f has been reserved
Aug 23 09:38:22 charles pnp: 00:06: ioport range 0x4100-0x411f has been reserved
Aug 23 09:38:22 charles pnp: 00:06: iomem range 0xdc000-0xdffff could not be reserved
Aug 23 09:38:22 charles PCI: Bridge: 0000:00:01.0
Aug 23 09:38:22 charles IO window: disabled.
Aug 23 09:38:22 charles MEM window: disabled.
Aug 23 09:38:22 charles PREFETCH window: disabled.
Aug 23 09:38:22 charles PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:02:00.0
Aug 23 09:38:22 charles PCI: Bridge: 0000:00:02.0
Aug 23 09:38:22 charles IO window: 5000-5fff
Aug 23 09:38:22 charles MEM window: d0000000-d1ffffff
Aug 23 09:38:22 charles PREFETCH window: c0000000-cfffffff
Aug 23 09:38:22 charles PCI: Bridge: 0000:00:03.0
Aug 23 09:38:22 charles IO window: disabled.
Aug 23 09:38:22 charles MEM window: disabled.
Aug 23 09:38:22 charles PREFETCH window: disabled.
Aug 23 09:38:22 charles PCI: Bridge: 0000:00:03.2
Aug 23 09:38:22 charles IO window: disabled.
Aug 23 09:38:22 charles MEM window: disabled.
Aug 23 09:38:22 charles PREFETCH window: disabled.
Aug 23 09:38:22 charles PCI: Bus 5, cardbus bridge: 0000:00:05.0
Aug 23 09:38:22 charles IO window: 00002400-000024ff
Aug 23 09:38:22 charles IO window: 00002800-000028ff
Aug 23 09:38:22 charles PREFETCH window: 88000000-8bffffff
Aug 23 09:38:22 charles MEM window: 8c000000-8fffffff
Aug 23 09:38:22 charles Time: acpi_pm clocksource has been installed.
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:02.0 to 64
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:03.0 to 64
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 31 (level, low) -> IRQ 31
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:03.2 to 64
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 18 (level, low) -> IRQ 18
Aug 23 09:38:22 charles NET: Registered protocol family 2
Aug 23 09:38:22 charles IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Aug 23 09:38:22 charles TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
Aug 23 09:38:22 charles TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 23 09:38:22 charles TCP: Hash tables configured (established 131072 bind 65536)
Aug 23 09:38:22 charles TCP reno registered
Aug 23 09:38:22 charles Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 23 09:38:22 charles NTFS driver 2.1.28 [Flags: R/W].
Aug 23 09:38:22 charles fuse init (API version 7.8)
Aug 23 09:38:22 charles Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 23 09:38:22 charles io scheduler noop registered
Aug 23 09:38:22 charles io scheduler cfq registered (default)
Aug 23 09:38:22 charles PCI: VIA PCI bridge detected. Disabling DAC.
Aug 23 09:38:22 charles PCI: Bypassing VIA 8237 APIC De-Assert Message
Aug 23 09:38:22 charles Boot video device is 0000:02:00.0
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:02.0 to 64
Aug 23 09:38:22 charles assign_interrupt_mode Found MSI capability
Aug 23 09:38:22 charles Allocate Port Service[0000:00:02.0:pcie00]
Aug 23 09:38:22 charles Allocate Port Service[0000:00:02.0:pcie01]
Aug 23 09:38:22 charles Allocate Port Service[0000:00:02.0:pcie03]
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:03.0 to 64
Aug 23 09:38:22 charles assign_interrupt_mode Found MSI capability
Aug 23 09:38:22 charles Allocate Port Service[0000:00:03.0:pcie00]
Aug 23 09:38:22 charles Allocate Port Service[0000:00:03.0:pcie01]
Aug 23 09:38:22 charles Allocate Port Service[0000:00:03.0:pcie03]
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:03.2 to 64
Aug 23 09:38:22 charles assign_interrupt_mode Found MSI capability
Aug 23 09:38:22 charles Allocate Port Service[0000:00:03.2:pcie00]
Aug 23 09:38:22 charles Allocate Port Service[0000:00:03.2:pcie01]
Aug 23 09:38:22 charles Allocate Port Service[0000:00:03.2:pcie03]
Aug 23 09:38:22 charles AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support
Aug 23 09:38:22 charles AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support
Aug 23 09:38:22 charles AER service couldn't init device 0000:00:03.2:pcie01 - no _OSC support
Aug 23 09:38:22 charles vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000600000, using 10240k, total 262144k
Aug 23 09:38:22 charles vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Aug 23 09:38:22 charles vesafb: scrolling: redraw
Aug 23 09:38:22 charles vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Aug 23 09:38:22 charles Console: switching to colour frame buffer device 160x64
Aug 23 09:38:22 charles fb0: VESA VGA frame buffer device
Aug 23 09:38:22 charles ACPI: AC Adapter [ADP0] (on-line)
Aug 23 09:38:22 charles ACPI: Battery Slot [BAT0] (battery present)
Aug 23 09:38:22 charles input: Power Button (CM) as /devices/virtual/input/input0
Aug 23 09:38:22 charles ACPI: Power Button (CM) [PWRB]
Aug 23 09:38:22 charles input: Lid Switch as /devices/virtual/input/input1
Aug 23 09:38:22 charles ACPI: Lid Switch [LID]
Aug 23 09:38:22 charles input: Sleep Button (CM) as /devices/virtual/input/input2
Aug 23 09:38:22 charles ACPI: Sleep Button (CM) [SLPB]
Aug 23 09:38:22 charles ACPI: Thermal Zone [THM0] (60 C)
Aug 23 09:38:22 charles Real Time Clock Driver v1.12ac
Aug 23 09:38:22 charles Linux agpgart interface v0.102
Aug 23 09:38:22 charles Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Aug 23 09:38:22 charles Hangcheck: Using get_cycles().
Aug 23 09:38:22 charles Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 23 09:38:22 charles serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 23 09:38:22 charles 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 23 09:38:22 charles parport_pc 00:09: reported by Plug and Play ACPI
Aug 23 09:38:22 charles parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Aug 23 09:38:22 charles loop: module loaded
Aug 23 09:38:22 charles PPP generic driver version 2.4.2
Aug 23 09:38:22 charles PPP Deflate Compression module registered
Aug 23 09:38:22 charles PPP BSD Compression module registered
Aug 23 09:38:22 charles PPP MPPE Compression module registered
Aug 23 09:38:22 charles tun: Universal TUN/TAP device driver, 1.6
Aug 23 09:38:22 charles tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Aug 23 09:38:22 charles r8169 Gigabit Ethernet driver 2.2LK loaded
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
Aug 23 09:38:22 charles PCI: Disallowing DAC for device 0000:00:08.0
Aug 23 09:38:22 charles eth0: RTL8169sb/8110sb at 0xffffc20000034800, 00:90:f5:48:a2:2e, XID 10000000 IRQ 19
Aug 23 09:38:22 charles Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 23 09:38:22 charles ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 23 09:38:22 charles VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
Aug 23 09:38:22 charles VP_IDE: chipset revision 6
Aug 23 09:38:22 charles VP_IDE: not 100% native mode: will probe irqs later
Aug 23 09:38:22 charles VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Aug 23 09:38:22 charles ide0: BM-DMA at 0x2090-0x2097, BIOS settings: hda:pio, hdb:pio
Aug 23 09:38:22 charles ide1: BM-DMA at 0x2098-0x209f, BIOS settings: hdc:DMA, hdd:pio
Aug 23 09:38:22 charles Probing IDE interface ide0...
Aug 23 09:38:22 charles Probing IDE interface ide1...
Aug 23 09:38:22 charles hdc: TSSTcorpCDW/DVD TS-L462C, ATAPI CD/DVD-ROM drive
Aug 23 09:38:22 charles hdc: selected mode 0x42
Aug 23 09:38:22 charles ide1 at 0x170-0x177,0x376 on irq 15
Aug 23 09:38:22 charles Probing IDE interface ide0...
Aug 23 09:38:22 charles hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
Aug 23 09:38:22 charles Uniform CD-ROM driver Revision: 3.20
Aug 23 09:38:22 charles sata_via 0000:00:0f.0: version 2.2
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
Aug 23 09:38:22 charles sata_via 0000:00:0f.0: routed to hard irq line 11
Aug 23 09:38:22 charles scsi0 : sata_via
Aug 23 09:38:22 charles scsi1 : sata_via
Aug 23 09:38:22 charles ata1: SATA max UDMA/133 cmd 0x00000000000120b0 ctl 0x00000000000120a6 bmdma 0x0000000000012080 irq 20
Aug 23 09:38:22 charles ata2: SATA max UDMA/133 cmd 0x00000000000120a8 ctl 0x00000000000120a2 bmdma 0x0000000000012088 irq 20
Aug 23 09:38:22 charles ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 23 09:38:22 charles ata1.00: ATA-7: ST9120821AS, 3.06, max UDMA/133
Aug 23 09:38:22 charles ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 23 09:38:22 charles ata1.00: configured for UDMA/133
Aug 23 09:38:22 charles ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 23 09:38:22 charles ata2.00: ATA-7: SAMSUNG HM080JI, YC100-04, max UDMA7
Aug 23 09:38:22 charles ata2.00: 156368016 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 23 09:38:22 charles ata2.00: configured for UDMA/133
Aug 23 09:38:22 charles scsi 0:0:0:0: Direct-Access ATA ST9120821AS 3.06 PQ: 0 ANSI: 5
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Write Protect is off
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Write Protect is off
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:38:22 charles sda: sda1 sda2 sda3 sda4
Aug 23 09:38:22 charles sd 0:0:0:0: [sda] Attached SCSI disk
Aug 23 09:38:22 charles sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 23 09:38:22 charles scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM080JI YC10 PQ: 0 ANSI: 5
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] 156368016 512-byte hardware sectors (80060 MB)
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Write Protect is off
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] 156368016 512-byte hardware sectors (80060 MB)
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Write Protect is off
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 23 09:38:22 charles sdb: sdb1 sdb2 sdb3 sdb4
Aug 23 09:38:22 charles sd 1:0:0:0: [sdb] Attached SCSI disk
Aug 23 09:38:22 charles sd 1:0:0:0: Attached scsi generic sg1 type 0
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 20 (level, low) -> IRQ 20
Aug 23 09:38:22 charles firewire_ohci: Added fw-ohci device 0000:00:06.0, OHCI version 1.10
Aug 23 09:38:22 charles Yenta: CardBus bridge found at 0000:00:05.0 [1558:0901]
Aug 23 09:38:22 charles Yenta: Using CSCINT to route CSC interrupts to PCI
Aug 23 09:38:22 charles Yenta: Routing CardBus interrupts to PCI
Aug 23 09:38:22 charles Yenta TI: socket 0000:00:05.0, mfunc 0x00001002, devctl 0x64
Aug 23 09:38:22 charles Yenta: ISA IRQ mask 0x0a78, PCI irq 18
Aug 23 09:38:22 charles Socket status: 30000006
Aug 23 09:38:22 charles firewire_core: created new fw device fw0 (0 config rom retries, S400)
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:38:22 charles ehci_hcd 0000:00:10.4: EHCI Host Controller
Aug 23 09:38:22 charles ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Aug 23 09:38:22 charles ehci_hcd 0000:00:10.4: irq 21, io mem 0xd2206c00
Aug 23 09:38:22 charles ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 23 09:38:22 charles usb usb1: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles hub 1-0:1.0: USB hub found
Aug 23 09:38:22 charles hub 1-0:1.0: 8 ports detected
Aug 23 09:38:22 charles USB Universal Host Controller Interface driver v3.0
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.0: UHCI Host Controller
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.0: irq 21, io base 0x00002000
Aug 23 09:38:22 charles usb usb2: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles hub 2-0:1.0: USB hub found
Aug 23 09:38:22 charles hub 2-0:1.0: 2 ports detected
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.1: UHCI Host Controller
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.1: irq 21, io base 0x00002020
Aug 23 09:38:22 charles usb usb3: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles hub 3-0:1.0: USB hub found
Aug 23 09:38:22 charles hub 3-0:1.0: 2 ports detected
Aug 23 09:38:22 charles usb 1-2: new high speed USB device using ehci_hcd and address 2
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.2: UHCI Host Controller
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.2: irq 21, io base 0x00002040
Aug 23 09:38:22 charles usb usb4: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles hub 4-0:1.0: USB hub found
Aug 23 09:38:22 charles hub 4-0:1.0: 2 ports detected
Aug 23 09:38:22 charles usb 1-2: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.3: UHCI Host Controller
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Aug 23 09:38:22 charles uhci_hcd 0000:00:10.3: irq 21, io base 0x00002060
Aug 23 09:38:22 charles usb usb5: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles hub 5-0:1.0: USB hub found
Aug 23 09:38:22 charles hub 5-0:1.0: 2 ports detected
Aug 23 09:38:22 charles usb 1-4: new high speed USB device using ehci_hcd and address 4
Aug 23 09:38:22 charles usb 1-4: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles usb 3-1: new low speed USB device using uhci_hcd and address 2
Aug 23 09:38:22 charles usb 3-1: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles usb 4-1: new low speed USB device using uhci_hcd and address 2
Aug 23 09:38:22 charles usb 4-1: configuration #1 chosen from 1 choice
Aug 23 09:38:22 charles usbcore: registered new interface driver usblp
Aug 23 09:38:22 charles Initializing USB Mass Storage driver...
Aug 23 09:38:22 charles scsi2 : SCSI emulation for USB Mass Storage devices
Aug 23 09:38:22 charles usb-storage: device found at 4
Aug 23 09:38:22 charles usb-storage: waiting for device to settle before scanning
Aug 23 09:38:22 charles usbcore: registered new interface driver usb-storage
Aug 23 09:38:22 charles USB Mass Storage support registered.
Aug 23 09:38:22 charles PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 23 09:38:22 charles i8042.c: Detected active multiplexing controller, rev 1.1.
Aug 23 09:38:22 charles serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 23 09:38:22 charles serio: i8042 AUX0 port at 0x60,0x64 irq 12
Aug 23 09:38:22 charles serio: i8042 AUX1 port at 0x60,0x64 irq 12
Aug 23 09:38:22 charles serio: i8042 AUX2 port at 0x60,0x64 irq 12
Aug 23 09:38:22 charles serio: i8042 AUX3 port at 0x60,0x64 irq 12
Aug 23 09:38:22 charles mice: PS/2 mouse device common for all mice
Aug 23 09:38:22 charles input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Aug 23 09:38:22 charles i2c /dev entries driver
Aug 23 09:38:22 charles input: HID 1267:0103 as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4
Aug 23 09:38:22 charles input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:10.1-1
Aug 23 09:38:22 charles input: HID 1267:0103 as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input5
Aug 23 09:38:22 charles input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:10.1-1
Aug 23 09:38:22 charles input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input6
Aug 23 09:38:22 charles input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.2-1
Aug 23 09:38:22 charles usbcore: registered new interface driver usbhid
Aug 23 09:38:22 charles drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 23 09:38:22 charles Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
Aug 23 09:38:22 charles ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Aug 23 09:38:22 charles ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
Aug 23 09:38:22 charles PCI: Setting latency timer of device 0000:00:11.6 to 64
Aug 23 09:38:22 charles Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
Aug 23 09:38:22 charles input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
Aug 23 09:38:22 charles MC'97 1 converters and GPIO not ready (0xff00)
Aug 23 09:38:22 charles ALSA device list:
Aug 23 09:38:22 charles #1: VIA 82XX modem at 0x1c00, irq 22
Aug 23 09:38:22 charles IPv4 over IPv4 tunneling driver
Aug 23 09:38:22 charles GRE over IPv4 tunneling driver
Aug 23 09:38:22 charles TCP cubic registered
Aug 23 09:38:22 charles Initializing XFRM netlink socket
Aug 23 09:38:22 charles NET: Registered protocol family 1
Aug 23 09:38:22 charles NET: Registered protocol family 17
Aug 23 09:38:22 charles NET: Registered protocol family 15
Aug 23 09:38:22 charles SCTP: Hash tables configured (established 65536 bind 65536)
Aug 23 09:38:22 charles powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.00.00)
Aug 23 09:38:22 charles powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8
Aug 23 09:38:22 charles powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa
Aug 23 09:38:22 charles powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc
Aug 23 09:38:22 charles powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
Aug 23 09:38:22 charles ReiserFS: sda4: found reiserfs format "3.6" with standard journal
Aug 23 09:38:22 charles ReiserFS: sda4: using ordered data mode
Aug 23 09:38:22 charles ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 23 09:38:22 charles ReiserFS: sda4: checking transaction log (sda4)
Aug 23 09:38:22 charles ReiserFS: sda4: Using r5 hash to sort names
Aug 23 09:38:22 charles VFS: Mounted root (reiserfs filesystem) readonly.
Aug 23 09:38:22 charles Freeing unused kernel memory: 220k freed
Aug 23 09:38:22 charles scsi 2:0:0:0: Direct-Access GENERIC USB Storage-CFC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:38:22 charles sd 2:0:0:0: [sdc] Attached SCSI removable disk
Aug 23 09:38:22 charles sd 2:0:0:0: Attached scsi generic sg2 type 0
Aug 23 09:38:22 charles scsi 2:0:0:1: Direct-Access GENERIC USB Storage-SDC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:38:22 charles sd 2:0:0:1: [sdd] Attached SCSI removable disk
Aug 23 09:38:22 charles sd 2:0:0:1: Attached scsi generic sg3 type 0
Aug 23 09:38:22 charles scsi 2:0:0:2: Direct-Access GENERIC USB Storage-SMC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:38:22 charles sd 2:0:0:2: [sde] Attached SCSI removable disk
Aug 23 09:38:22 charles sd 2:0:0:2: Attached scsi generic sg4 type 0
Aug 23 09:38:22 charles scsi 2:0:0:3: Direct-Access GENERIC USB Storage-MSC 019A PQ: 0 ANSI: 0 CCS
Aug 23 09:38:22 charles sd 2:0:0:3: [sdf] Attached SCSI removable disk
Aug 23 09:38:22 charles sd 2:0:0:3: Attached scsi generic sg5 type 0
Aug 23 09:38:22 charles usb-storage: device scan complete
Aug 23 09:38:22 charles Adding 1959920k swap on /dev/sda3. Priority:-1 extents:1 across:1959920k
Aug 23 09:38:22 charles hdc: selected mode 0x42
Aug 23 09:38:22 charles acpid: starting up
Aug 23 09:38:22 charles acpid: 4 rules loaded
Aug 23 09:38:24 charles rpc.statd[3600]: Version 1.1.0 Starting
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.6.23-rc3 issues: AMD64 laptop hard-reboots soon after executing init
2007-08-23 22:47 2.6.23-rc3 issues: AMD64 laptop hard-reboots soon after executing init James Ausmus
@ 2007-08-28 20:28 ` James Ausmus
0 siblings, 0 replies; 2+ messages in thread
From: James Ausmus @ 2007-08-28 20:28 UTC (permalink / raw)
To: linux-kernel
On 8/23/07, James Ausmus <james.ausmus@gmail.com> wrote:
> That pretty much sums it up - It's an x86_64 system, I pulled my
> 2.6.20 .config file over, verified settings in make menuconfig, built
> it, and, if I use my normal init system (Gentoo distro), the laptop
> does a hard reboot just a little bit before I would hit a login
> prompt. If I append init=/bin/bash, I get the same behaviour after
> about the same time (but I do get a bash prompt).
<snip>
Problem seems to be solved with rc4.
Thanks!
-James
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-08-28 20:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-08-23 22:47 2.6.23-rc3 issues: AMD64 laptop hard-reboots soon after executing init James Ausmus
2007-08-28 20:28 ` James Ausmus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®