mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Waqar Hameed <waqar.hameed@axis.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: <kernel@axis.com>, <linux-arm-msm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 11/38] arm: dts: qcom: apq8064: Add newline between subnodes
Date: Fri, 2 Oct 2026 00:36:36 +0200	[thread overview]
Message-ID: <b86dabaeeea3672a790fb5e8378f829bd616de78.1790892852.git.waqar.hameed@axis.com> (raw)
In-Reply-To: <cover.1790892852.git.waqar.hameed@axis.com>

There should be a newline (and only one) between subnodes. Found/fixed
with dtfmt (Devicetree Source formatter).

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
 .../boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts    |  2 ++
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi              | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 9471839928505..bdd3dab530ece 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -53,6 +53,7 @@ key-volume-up {
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
+
 		key-volume-down {
 			label = "Volume Down";
 			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
@@ -330,6 +331,7 @@ pm8921_lvs5: lvs5 {
 		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
+
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 09062b2ad8ba5..0423b9380c812 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -116,6 +116,7 @@ cpu_alert0: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit0: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -137,6 +138,7 @@ cpu_alert1: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit1: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -158,6 +160,7 @@ cpu_alert2: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit2: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -179,6 +182,7 @@ cpu_alert3: trip0 {
 					hysteresis = <2000>;
 					type = "passive";
 				};
+
 				cpu_crit3: trip1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -707,6 +711,7 @@ qfprom: efuse@700000 {
 			tsens_calib: calib@404 {
 				reg = <0x404 0x10>;
 			};
+
 			tsens_backup: backup-calib@414 {
 				reg = <0x414 0x10>;
 			};
@@ -1177,7 +1182,6 @@ dsi0_out: endpoint {
 			};
 		};
 
-
 		dsi0_phy: phy@4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
@@ -1249,7 +1253,6 @@ dsi1_out: endpoint {
 			};
 		};
 
-
 		dsi1_phy: dsi-phy@5800200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			reg = <0x05800200 0x100>,
@@ -1596,18 +1599,21 @@ funnel_in0: endpoint {
 						remote-endpoint = <&etm0_out>;
 					};
 				};
+
 				port@1 {
 					reg = <1>;
 					funnel_in1: endpoint {
 						remote-endpoint = <&etm1_out>;
 					};
 				};
+
 				port@4 {
 					reg = <4>;
 					funnel_in4: endpoint {
 						remote-endpoint = <&etm2_out>;
 					};
 				};
+
 				port@5 {
 					reg = <5>;
 					funnel_in5: endpoint {
@@ -1698,4 +1704,5 @@ etm3_out: endpoint {
 		};
 	};
 };
+
 #include "qcom-apq8064-pins.dtsi"
-- 
2.43.0


  parent reply	other threads:[~2026-10-01 22:36 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
2026-10-01 22:36 ` [PATCH 01/38] arm: dts: qcom: pm8226: Add newline between subnodes Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 02/38] arm: dts: qcom: pm8841: Remove superfluous empty lines Waqar Hameed
2026-10-12 15:21   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 04/38] arm: dts: qcom: pm8941: " Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 03/38] arm: dts: qcom: pm8921: " Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 06/38] arm: dts: qcom: apq8026: Add newline between subnodes Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 05/38] arm: dts: qcom: pm8084: Remove superfluous empty line Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 07/38] arm: dts: qcom: apq8026: Add space between OR-operator Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 08/38] arm: dts: qcom: apq8060: Add newline between subnodes Waqar Hameed
2026-10-12 15:22   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 09/38] arm: dts: qcom: apq8060: Align multiple property data Waqar Hameed
2026-10-12 15:23   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 10/38] arm: dts: qcom: apq8060: Indent property data with tab Waqar Hameed
2026-10-12 15:24   ` Konrad Dybcio
2026-10-16 14:14     ` Waqar Hameed
2026-10-01 22:36 ` Waqar Hameed [this message]
2026-10-12 15:23   ` [PATCH 11/38] arm: dts: qcom: apq8064: Add newline between subnodes Konrad Dybcio
2026-10-16 14:14     ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 12/38] arm: dts: qcom: apq8064: Remove empty line at end of node Waqar Hameed
2026-10-12 15:24   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 13/38] arm: dts: qcom: apq8064: Add space before line comments Waqar Hameed
2026-10-12 15:24   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 14/38] arm: dts: qcom: apq8064: Align multiple property data Waqar Hameed
2026-10-12 15:52   ` Konrad Dybcio
2026-10-16 14:14     ` Waqar Hameed
2026-10-21 13:53       ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 15/38] arm: dts: qcom: apq8064: Remove tab after property name Waqar Hameed
2026-10-12 15:24   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 16/38] arm: dts: qcom: ipq4018: Indent closing brace properly Waqar Hameed
2026-10-12 15:25   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 17/38] arm: dts: qcom: ipq4019: Add newline between subnodes Waqar Hameed
2026-10-12 15:25   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 19/38] arm: dts: qcom: ipq4019: Break long property array data Waqar Hameed
2026-10-12 15:26   ` Konrad Dybcio
2026-10-16 14:15     ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 18/38] arm: dts: qcom: ipq4019: Align multiple property data Waqar Hameed
2026-10-12 15:26   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 21/38] arm: dts: qcom: ipq8064: " Waqar Hameed
2026-10-12 15:28   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 20/38] arm: dts: qcom: ipq8064: Add newline between subnodes Waqar Hameed
2026-10-12 15:28   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 22/38] arm: dts: qcom: ipq8064: Break long property array data Waqar Hameed
2026-10-12 15:31   ` Konrad Dybcio
2026-10-16 14:15     ` Waqar Hameed
2026-10-16 14:48       ` Krzysztof Kozlowski
2026-10-19  8:52         ` Waqar Hameed
2026-10-21 13:50       ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 23/38] arm: dts: qcom: msm8226: Add space between OR-operator Waqar Hameed
2026-10-12 15:28   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 24/38] arm: dts: qcom: msm8226: Add newline between subnodes Waqar Hameed
2026-10-12 15:28   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 25/38] arm: dts: qcom: ipq8064: Break long property array data Waqar Hameed
2026-10-01 22:36 ` [PATCH 26/38] arm: dts: qcom: msm8226: Align multiple property data Waqar Hameed
2026-10-12 15:31   ` Konrad Dybcio
2026-10-16 14:15     ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 27/38] arm: dts: qcom: msm8660: Remove empty line at end of node Waqar Hameed
2026-10-12 15:31   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 28/38] arm: dts: qcom: msm8660: Remove space inside array property Waqar Hameed
2026-10-12 15:31   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 29/38] arm: dts: qcom: msm8660: Align closing array bracket Waqar Hameed
2026-10-12 15:31   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 30/38] arm: dts: qcom: msm8916: Add newline between subnodes Waqar Hameed
2026-10-12 15:31   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 31/38] arm: dts: qcom: msm8960: Properly indent subnodes Waqar Hameed
2026-10-12 15:50   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 32/38] arm: dts: qcom: msm8660: Align closing array bracket Waqar Hameed
2026-10-12 15:50   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 33/38] arm: dts: qcom: msm8974: Align multiple property data Waqar Hameed
2026-10-12 15:51   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 34/38] arm: dts: qcom: msm8974: Align closing brace properly Waqar Hameed
2026-10-12 15:51   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 35/38] arm: dts: qcom: msm8974: Add newline between subnodes Waqar Hameed
2026-10-12 15:51   ` Konrad Dybcio
2026-10-16 14:15     ` Waqar Hameed
2026-10-16 14:44       ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 36/38] arm: dts: qcom: sdx55: Properly indent subnode Waqar Hameed
2026-10-12 15:51   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 37/38] arm: dts: qcom: sdx65: Remove empty line at end of node Waqar Hameed
2026-10-12 15:51   ` Konrad Dybcio
2026-10-01 22:36 ` [PATCH 38/38] arm: dts: qcom: sdx65: Align multiple property data Waqar Hameed
2026-10-12 15:52   ` Konrad Dybcio
2026-10-12 15:28 ` [PATCH 00/38] arm: dts: qcom: Format with dtfmt Konrad Dybcio
2026-10-16 14:13   ` Waqar Hameed
2026-11-08 20:21 ` (subset) " Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b86dabaeeea3672a790fb5e8378f829bd616de78.1790892852.git.waqar.hameed@axis.com \
    --to=waqar.hameed@axis.com \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@axis.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®