mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrew Davis <afd@ti.com>
To: Devarsh Thakkar <devarsht@ti.com>, <mchehab@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>, <hverkuil-cisco@xs4all.nl>,
	<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <laurent.pinchart@ideasonboard.com>, <praneeth@ti.com>,
	<nm@ti.com>, <vigneshr@ti.com>, <a-bhatia1@ti.com>,
	<j-luthra@ti.com>, <b-brnich@ti.com>, <detheridge@ti.com>,
	<p-mantena@ti.com>, <vijayp@ti.com>, <andrzej.p@collabora.com>,
	<nicolas@ndufresne.ca>
Subject: Re: [PATCH v4 1/3] media: dt-bindings: Add Imagination E5010 JPEG Encoder
Date: Mon, 5 Feb 2024 15:52:54 -0600	[thread overview]
Message-ID: <b98a3cb1-ad0d-4f7e-872e-b6381e57ec4a@ti.com> (raw)
In-Reply-To: <20240205114239.924697-2-devarsht@ti.com>

On 2/5/24 5:42 AM, Devarsh Thakkar wrote:
> Add dt-bindings for Imagination E5010 JPEG Encoder [1] which is implemented
> as stateful V4L2 M2M driver.
> 
> The device supports baseline encoding with two different quantization
> tables and compression ratio as demanded.
> 
> Minimum resolution supported is 64x64 and Maximum resolution supported is
> 8192x8192.
> 
> [1]:  AM62A TRM (Section 7.6 is for JPEG Encoder)
> Link: https://www.ti.com/lit/pdf/spruj16
> 
> Co-developed-by: David Huang <d-huang@ti.com>
> Signed-off-by: David Huang <d-huang@ti.com>
> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
> ---
> V2: No change
> V3:
> - Add vendor specific compatible
> - Update reg names
> - Update clocks to 1
> - Fix dts example with proper naming
> V4:
>   - Use ti-specific compatible ti,am62a-jpeg-enc as secondary one
>   - Update commit message and title
>   - Remove clock-names as only single clock
> 
> Link to previous commit:
> https://lore.kernel.org/all/20230816152210.4080779-2-devarsht@ti.com/
> ---
>   .../bindings/media/img,e5010-jpeg-enc.yaml    | 75 +++++++++++++++++++
>   MAINTAINERS                                   |  5 ++
>   2 files changed, 80 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> new file mode 100644
> index 000000000000..085020cb9e61
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Imagination E5010 JPEG Encoder
> +
> +maintainers:
> +  - Devarsh Thakkar <devarsht@ti.com>
> +
> +description: |
> +  The E5010 is a JPEG encoder from Imagination Technologies implemented on
> +  TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
> +  inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
> +  8Kx8K resolution.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: ti,am62a-jpeg-enc
> +          - const: img,e5010-jpeg-enc
> +      - const: img,e5010-jpeg-enc
> +
> +  reg:
> +    items:
> +      - description: The E5010 core register region
> +      - description: The E5010 mmu register region
> +
> +  reg-names:
> +    items:
> +      - const: core
> +      - const: mmu
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1

"resets" seems unused.

Andrew

> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      jpeg-encoder@fd20000 {
> +          compatible = "img,e5010-jpeg-enc";
> +          reg = <0x00 0xfd20000 0x00 0x100>,
> +                <0x00 0xfd20200 0x00 0x200>;
> +          reg-names = "core", "mmu";
> +          clocks = <&k3_clks 201 0>;
> +          power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
> +          interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8999497011a2..d0f8c46d3ce9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10461,6 +10461,11 @@ S:	Maintained
>   F:	Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
>   F:	drivers/auxdisplay/img-ascii-lcd.c
>   
> +IMGTEC JPEG ENCODER DRIVER
> +M:	Devarsh Thakkar <devarsht@ti.com>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
> +
>   IMGTEC IR DECODER DRIVER
>   S:	Orphan
>   F:	drivers/media/rc/img-ir/

  parent reply	other threads:[~2024-02-05 21:53 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-05 11:42 [PATCH v4 0/3] Add V4L2 M2M Driver for " Devarsh Thakkar
2024-02-05 11:42 ` [PATCH v4 1/3] media: dt-bindings: Add Imagination " Devarsh Thakkar
2024-02-05 20:09   ` Rob Herring
2024-02-05 21:52   ` Andrew Davis [this message]
2024-02-07  6:28     ` Devarsh Thakkar
2024-02-05 11:42 ` [PATCH v4 2/3] media: jpeg: Add reference quantization and huffman tables Devarsh Thakkar
2024-02-05 11:42 ` [PATCH v4 3/3] media: imagination: Add E5010 JPEG Encoder driver Devarsh Thakkar
2024-02-05 13:11   ` Benjamin Gaignard
2024-02-07  9:40     ` Devarsh Thakkar
2024-02-07 10:01       ` Benjamin Gaignard
2024-02-07 13:21         ` Devarsh Thakkar
2024-02-05 20:31   ` Andrew Davis
2024-02-07 13:14     ` Devarsh Thakkar
2024-02-07 17:21       ` Andrew Davis
2024-02-08 10:04         ` Devarsh Thakkar
2024-02-15 13:55           ` Devarsh Thakkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b98a3cb1-ad0d-4f7e-872e-b6381e57ec4a@ti.com \
    --to=afd@ti.com \
    --cc=a-bhatia1@ti.com \
    --cc=andrzej.p@collabora.com \
    --cc=b-brnich@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=detheridge@ti.com \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=j-luthra@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=nicolas@ndufresne.ca \
    --cc=nm@ti.com \
    --cc=p-mantena@ti.com \
    --cc=praneeth@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vijayp@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®