Re: [PATCH 11/18] spi: qup: properly detect extra interrupts

[Sricharan R <sricharan@codeaurora.org>]

Hi Varada,

On 6/14/2017 11:22 AM, Varadarajan Narayanan wrote:
> It's possible for a SPI transaction to complete and get another
> interrupt and have it processed on the same spi_transfer before the
> transfer_one can set it to NULL.
> 
> This masks unexpected interrupts, so let's set the spi_transfer to
> NULL in the interrupt once the transaction is done. So we can
> properly detect these bad interrupts and print warning messages.
> 
> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
>  drivers/spi/spi-qup.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
> index bd53e82..1a2a9d9 100644
> --- a/drivers/spi/spi-qup.c
> +++ b/drivers/spi/spi-qup.c
> @@ -496,13 +496,13 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
>  	struct spi_qup *controller = dev_id;
>  	struct spi_transfer *xfer;
>  	u32 opflags, qup_err, spi_err;
> -	unsigned long flags;
>  	int error = 0;
> +	bool done = 0;
>  
> -	spin_lock_irqsave(&controller->lock, flags);
> +	spin_lock(&controller->lock);
>  	xfer = controller->xfer;
>  	controller->xfer = NULL;
> -	spin_unlock_irqrestore(&controller->lock, flags);
> +	spin_unlock(&controller->lock);

 Why change the locking here ?

>  
>  	qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
>  	spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
> @@ -556,16 +556,19 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
>  			spi_qup_write(controller, xfer);
>  	}
>  
> -	spin_lock_irqsave(&controller->lock, flags);
> -	controller->error = error;
> -	controller->xfer = xfer;
> -	spin_unlock_irqrestore(&controller->lock, flags);
> -
>  	/* re-read opflags as flags may have changed due to actions above */
>  	opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
>  
>  	if ((controller->rx_bytes == xfer->len &&
>  		(opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) ||  error)
> +		done = true;
> +
> +	spin_lock(&controller->lock);
> +	controller->error = error;
> +	controller->xfer = done ? NULL : xfer;
> +	spin_unlock(&controller->lock);
> +
> +	if (done)
>  		complete(&controller->done);
>  
  Its not clear, why the driver is setting the controller->xfer = NULL
  and restoring it inside the irq. This patch seems to fix things on
  top of that.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation