* [PATCH][next] media: bt8xx: make read-only arrays static @ 2023-06-27 13:48 Colin Ian King 2023-06-27 14:38 ` Tommaso Merciai 0 siblings, 1 reply; 5+ messages in thread From: Colin Ian King @ 2023-06-27 13:48 UTC (permalink / raw) To: Mauro Carvalho Chehab, linux-media; +Cc: kernel-janitors, linux-kernel Don't populate the arrays on the stack, instead make them static const. Also add spaces between values to clean up checkpatch style warnings. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> --- drivers/media/pci/bt8xx/dvb-bt8xx.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c index 4cb890b949c3..df83b59a618d 100644 --- a/drivers/media/pci/bt8xx/dvb-bt8xx.c +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c @@ -190,11 +190,15 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe) u32 freq = c->frequency; int i, a, n, pump; u32 band, pll; - u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, - 1576000,1718000,1856000,2036000,2150000}; - u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, + static const u32 osci[] = { + 950000, 1019000, 1075000, 1178000, 1296000, 1432000, + 1576000, 1718000, 1856000, 2036000, 2150000 + }; + static const u32 bandsel[] = { + 0, 0x00020000, 0x00040000, 0x00100800, 0x00101000, 0x00102000,0x00104000,0x00108000,0x00110000, - 0x00120000,0x00140000}; + 0x00120000, 0x00140000 + }; #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq); -- 2.39.2 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH][next] media: bt8xx: make read-only arrays static 2023-06-27 13:48 [PATCH][next] media: bt8xx: make read-only arrays static Colin Ian King @ 2023-06-27 14:38 ` Tommaso Merciai 2023-06-27 15:04 ` Colin King (gmail) 0 siblings, 1 reply; 5+ messages in thread From: Tommaso Merciai @ 2023-06-27 14:38 UTC (permalink / raw) To: Colin Ian King Cc: Mauro Carvalho Chehab, linux-media, kernel-janitors, linux-kernel Hi Colin, On Tue, Jun 27, 2023 at 02:48:51PM +0100, Colin Ian King wrote: > Don't populate the arrays on the stack, instead make them static const. > Also add spaces between values to clean up checkpatch style warnings. > > Signed-off-by: Colin Ian King <colin.i.king@gmail.com> > --- > drivers/media/pci/bt8xx/dvb-bt8xx.c | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c > index 4cb890b949c3..df83b59a618d 100644 > --- a/drivers/media/pci/bt8xx/dvb-bt8xx.c > +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c > @@ -190,11 +190,15 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe) > u32 freq = c->frequency; > int i, a, n, pump; > u32 band, pll; > - u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, > - 1576000,1718000,1856000,2036000,2150000}; > - u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, > + static const u32 osci[] = { > + 950000, 1019000, 1075000, 1178000, 1296000, 1432000, > + 1576000, 1718000, 1856000, 2036000, 2150000 > + }; > + static const u32 bandsel[] = { > + 0, 0x00020000, 0x00040000, 0x00100800, 0x00101000, > 0x00102000,0x00104000,0x00108000,0x00110000, Are you not missing space also here? > - 0x00120000,0x00140000}; > + 0x00120000, 0x00140000 > + }; > > #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ > dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq); > -- > 2.39.2 > Regards, Tommaso ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH][next] media: bt8xx: make read-only arrays static 2023-06-27 14:38 ` Tommaso Merciai @ 2023-06-27 15:04 ` Colin King (gmail) 2023-06-27 15:14 ` Tommaso Merciai 0 siblings, 1 reply; 5+ messages in thread From: Colin King (gmail) @ 2023-06-27 15:04 UTC (permalink / raw) To: Tommaso Merciai Cc: Mauro Carvalho Chehab, linux-media, kernel-janitors, linux-kernel On 27/06/2023 15:38, Tommaso Merciai wrote: > Hi Colin, > > On Tue, Jun 27, 2023 at 02:48:51PM +0100, Colin Ian King wrote: >> Don't populate the arrays on the stack, instead make them static const. >> Also add spaces between values to clean up checkpatch style warnings. >> >> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> >> --- >> drivers/media/pci/bt8xx/dvb-bt8xx.c | 12 ++++++++---- >> 1 file changed, 8 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c >> index 4cb890b949c3..df83b59a618d 100644 >> --- a/drivers/media/pci/bt8xx/dvb-bt8xx.c >> +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c >> @@ -190,11 +190,15 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe) >> u32 freq = c->frequency; >> int i, a, n, pump; >> u32 band, pll; >> - u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, >> - 1576000,1718000,1856000,2036000,2150000}; >> - u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, >> + static const u32 osci[] = { >> + 950000, 1019000, 1075000, 1178000, 1296000, 1432000, >> + 1576000, 1718000, 1856000, 2036000, 2150000 >> + }; >> + static const u32 bandsel[] = { >> + 0, 0x00020000, 0x00040000, 0x00100800, 0x00101000, >> 0x00102000,0x00104000,0x00108000,0x00110000, > > Are you not missing space also here? I can't see the space you are referring to. > >> - 0x00120000,0x00140000}; >> + 0x00120000, 0x00140000 >> + }; >> >> #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ >> dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq); >> -- >> 2.39.2 >> > > Regards, > Tommaso ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH][next] media: bt8xx: make read-only arrays static 2023-06-27 15:04 ` Colin King (gmail) @ 2023-06-27 15:14 ` Tommaso Merciai 2023-06-27 15:22 ` Colin King (gmail) 0 siblings, 1 reply; 5+ messages in thread From: Tommaso Merciai @ 2023-06-27 15:14 UTC (permalink / raw) To: Colin King (gmail) Cc: Mauro Carvalho Chehab, linux-media, kernel-janitors, linux-kernel Hi Coli, On Tue, Jun 27, 2023 at 04:04:38PM +0100, Colin King (gmail) wrote: > On 27/06/2023 15:38, Tommaso Merciai wrote: > > Hi Colin, > > > > On Tue, Jun 27, 2023 at 02:48:51PM +0100, Colin Ian King wrote: > > > Don't populate the arrays on the stack, instead make them static const. > > > Also add spaces between values to clean up checkpatch style warnings. > > > > > > Signed-off-by: Colin Ian King <colin.i.king@gmail.com> > > > --- > > > drivers/media/pci/bt8xx/dvb-bt8xx.c | 12 ++++++++---- > > > 1 file changed, 8 insertions(+), 4 deletions(-) > > > > > > diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c > > > index 4cb890b949c3..df83b59a618d 100644 > > > --- a/drivers/media/pci/bt8xx/dvb-bt8xx.c > > > +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c > > > @@ -190,11 +190,15 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe) > > > u32 freq = c->frequency; > > > int i, a, n, pump; > > > u32 band, pll; > > > - u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, > > > - 1576000,1718000,1856000,2036000,2150000}; > > > - u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, > > > + static const u32 osci[] = { > > > + 950000, 1019000, 1075000, 1178000, 1296000, 1432000, > > > + 1576000, 1718000, 1856000, 2036000, 2150000 > > > + }; > > > + static const u32 bandsel[] = { > > > + 0, 0x00020000, 0x00040000, 0x00100800, 0x00101000, > > > 0x00102000,0x00104000,0x00108000,0x00110000, + 0x00102000, 0x00104000, 0x00108000, 0x00110000, ERROR: space required after that ',' (ctx:VxV) #199: FILE: drivers/media/pci/bt8xx/dvb-bt8xx.c:199: + 0x00102000,0x00104000,0x00108000,0x00110000, I'm wrong? Regards, Tommaso > > > > Are you not missing space also here? > > I can't see the space you are referring to. > > > > > > - 0x00120000,0x00140000}; > > > + 0x00120000, 0x00140000 > > > + }; > > > #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ > > > dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq); > > > -- > > > 2.39.2 > > > > > > > Regards, > > Tommaso > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH][next] media: bt8xx: make read-only arrays static 2023-06-27 15:14 ` Tommaso Merciai @ 2023-06-27 15:22 ` Colin King (gmail) 0 siblings, 0 replies; 5+ messages in thread From: Colin King (gmail) @ 2023-06-27 15:22 UTC (permalink / raw) To: Tommaso Merciai Cc: Mauro Carvalho Chehab, linux-media, kernel-janitors, linux-kernel On 27/06/2023 16:14, Tommaso Merciai wrote: > Hi Coli, > > On Tue, Jun 27, 2023 at 04:04:38PM +0100, Colin King (gmail) wrote: >> On 27/06/2023 15:38, Tommaso Merciai wrote: >>> Hi Colin, >>> >>> On Tue, Jun 27, 2023 at 02:48:51PM +0100, Colin Ian King wrote: >>>> Don't populate the arrays on the stack, instead make them static const. >>>> Also add spaces between values to clean up checkpatch style warnings. >>>> >>>> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> >>>> --- >>>> drivers/media/pci/bt8xx/dvb-bt8xx.c | 12 ++++++++---- >>>> 1 file changed, 8 insertions(+), 4 deletions(-) >>>> >>>> diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c >>>> index 4cb890b949c3..df83b59a618d 100644 >>>> --- a/drivers/media/pci/bt8xx/dvb-bt8xx.c >>>> +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c >>>> @@ -190,11 +190,15 @@ static int cx24108_tuner_set_params(struct dvb_frontend *fe) >>>> u32 freq = c->frequency; >>>> int i, a, n, pump; >>>> u32 band, pll; >>>> - u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, >>>> - 1576000,1718000,1856000,2036000,2150000}; >>>> - u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, >>>> + static const u32 osci[] = { >>>> + 950000, 1019000, 1075000, 1178000, 1296000, 1432000, >>>> + 1576000, 1718000, 1856000, 2036000, 2150000 >>>> + }; >>>> + static const u32 bandsel[] = { >>>> + 0, 0x00020000, 0x00040000, 0x00100800, 0x00101000, >>>> 0x00102000,0x00104000,0x00108000,0x00110000, > + 0x00102000, 0x00104000, 0x00108000, 0x00110000, > > ERROR: space required after that ',' (ctx:VxV) > #199: FILE: drivers/media/pci/bt8xx/dvb-bt8xx.c:199: > + 0x00102000,0x00104000,0x00108000,0x00110000, Yep, I can see it now, I'll send a V2. :-/ > > I'm wrong? > > Regards, > Tommaso > >>> >>> Are you not missing space also here? >> >> I can't see the space you are referring to. >> >>> >>>> - 0x00120000,0x00140000}; >>>> + 0x00120000, 0x00140000 >>>> + }; >>>> #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ >>>> dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq); >>>> -- >>>> 2.39.2 >>>> >>> >>> Regards, >>> Tommaso >> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-06-27 15:22 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-06-27 13:48 [PATCH][next] media: bt8xx: make read-only arrays static Colin Ian King 2023-06-27 14:38 ` Tommaso Merciai 2023-06-27 15:04 ` Colin King (gmail) 2023-06-27 15:14 ` Tommaso Merciai 2023-06-27 15:22 ` Colin King (gmail)
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®