mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Karsten Keil <keil@b1-systems.de>
To: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org, David Miller <davem@davemloft.net>,
	i4ldeveloper@listserv.isdn4linux.de
Subject: [mISDN PATCH v2 02/19] DSP now uses ring buffer for echo canceler
Date: Fri, 22 May 2009 23:04:45 +0200	[thread overview]
Message-ID: <bb4f2bad6654b2dd9f9e7c4a983c0c784654ac3e.1243024967.git.kkeil@pingi.linux-pingi.de> (raw)
In-Reply-To: <cover.1243024967.git.kkeil@pingi.linux-pingi.de>

From: Andreas Eversberg <andreas@eversberg.eu>

DSP now uses ring buffer for echo canceler.
Added missing include in l1oip_codec.c

Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
---
 drivers/isdn/mISDN/dsp.h         |    3 ++-
 drivers/isdn/mISDN/l1oip_codec.c |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
index 98a33c5..0a4a362 100644
--- a/drivers/isdn/mISDN/dsp.h
+++ b/drivers/isdn/mISDN/dsp.h
@@ -112,7 +112,8 @@ struct dsp_conf {
 
 #define DSP_DTMF_NPOINTS 102
 
-#define ECHOCAN_BUFLEN (4*128)
+#define ECHOCAN_BUFF_SIZE 0x400 /* must be 2**n */
+#define ECHOCAN_BUFF_MASK 0x3ff /* -1 */
 
 struct dsp_dtmf {
 	int		treshold; /* above this is dtmf (square of) */
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
index e4ecba3..bbfd1b8 100644
--- a/drivers/isdn/mISDN/l1oip_codec.c
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -48,6 +48,7 @@ NOTE: The bytes are handled as they are law-encoded.
 
 #include <linux/vmalloc.h>
 #include <linux/mISDNif.h>
+#include <linux/in.h>
 #include "core.h"
 #include "l1oip.h"
 
-- 
1.6.0.2


  parent reply	other threads:[~2009-05-22 21:05 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-22 20:42 [mISDN PATCH v2 00/19] mISDN patchset for next Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 01/19] Add watchdog functionality to hfcmulti driver Karsten Keil
2009-05-22 21:04 ` Karsten Keil [this message]
2009-05-22 21:04 ` [mISDN PATCH v2 03/19] Echo canceler now gets delay information from hardware Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 04/19] Fixed missing spin lock on pipeline process Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 05/19] Reduce stack size in dsp_cmx_send() Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 06/19] Added layer-1-hold feature Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 07/19] Fix DTMF locking bug issue Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 08/19] Hardware acceleration is now possible in conjunction with audio recording Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 09/19] Fix TEI and SAPI handling Karsten Keil
2009-05-22 21:53   ` Sam Ravnborg
2009-05-23 13:00     ` Karsten Keil
2009-05-23 23:10       ` Sam Ravnborg
2009-05-24 15:39         ` Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 10/19] Add "sapi" information to debug messages Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 11/19] Add allocation of recvbuf[1500] at run time to reduce stack size Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 12/19] Fix skb leak in error cases Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 14/19] Add XHFC support for embedded Speech-Design board to hfcmulti Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 13/19] isdn: get_free_devid() failure ignored Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 16/19] Added PCI ID for new Junghanns.net Single E1 cards Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 15/19] Add PCI ID for Junghanns 8S card Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 17/19] Cleanup debug messages Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 18/19] Use kernel_{send,recv}msg instead of open coding Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 19/19] Fix DTMF detection enable/disable Karsten Keil
2009-05-25  7:53 ` [mISDN PATCH v2 00/19] mISDN patchset for next David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bb4f2bad6654b2dd9f9e7c4a983c0c784654ac3e.1243024967.git.kkeil@pingi.linux-pingi.de \
    --to=keil@b1-systems.de \
    --cc=davem@davemloft.net \
    --cc=i4ldeveloper@listserv.isdn4linux.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®