From: Karsten Keil <keil@b1-systems.de>
To: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org, David Miller <davem@davemloft.net>,
i4ldeveloper@listserv.isdn4linux.de
Subject: [mISDN PATCH v2 01/19] Add watchdog functionality to hfcmulti driver
Date: Fri, 22 May 2009 23:04:44 +0200 [thread overview]
Message-ID: <c9cf6a56ab02e09941e5916e1d71f0325fdbbb58.1243024967.git.kkeil@pingi.linux-pingi.de> (raw)
In-Reply-To: <cover.1243024967.git.kkeil@pingi.linux-pingi.de>
From: Andreas Eversberg <andreas@eversberg.eu>
This patch was made by Titus Moldovan and provides IOCTL functions for enabling
and disabling the controller's built in watchdog. The use is optional.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
---
drivers/isdn/hardware/mISDN/hfc_multi.h | 1 +
drivers/isdn/hardware/mISDN/hfcmulti.c | 32 ++++++++++++++++++++++++++++++-
include/linux/mISDNif.h | 3 +-
3 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
index 663b77f..5765e19 100644
--- a/drivers/isdn/hardware/mISDN/hfc_multi.h
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -62,6 +62,7 @@ struct hfcm_hw {
u_char r_sci_msk;
u_char r_tx0, r_tx1;
u_char a_st_ctrl0[8];
+ u_char r_bert_wd_md;
timer_t timer;
};
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 0b28141..ca153de 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -4013,11 +4013,41 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
static int
channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
{
+ struct hfc_multi *hc = dch->hw;
int ret = 0;
+ int wd_mode, wd_cnt;
switch (cq->op) {
case MISDN_CTRL_GETOP:
- cq->op = 0;
+ cq->op = MISDN_CTRL_HFC_OP;
+ break;
+ case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */
+ wd_cnt = cq->p1 & 0xf;
+ wd_mode = !!(cq->p1 >> 4);
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG
+ "%s: MISDN_CTRL_HFC_WD_INIT mode %s counter 0x%x\n",
+ __func__, wd_mode ? "AUTO" : "MANUAL", wd_cnt);
+ /* set the watchdog timer */
+ HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4));
+ hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */;
+ /* init the watchdog register and reset the counter */
+ HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
+ if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+ /* enable the watchdog output for Speech-Design */
+ HFC_outb(hc, R_GPIO_SEL, V_GPIO_SEL7);
+ HFC_outb(hc, R_GPIO_EN1, V_GPIO_EN15);
+ HFC_outb(hc, R_GPIO_OUT1, 0);
+ HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15);
+ }
+ break;
+ case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
+ __func__);
+ HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
break;
default:
printk(KERN_WARNING "%s: unknown Op %x\n",
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 5da3d95..cf97459 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -362,7 +362,8 @@ clear_channelmap(u_int nr, u_char *map)
#define MISDN_CTRL_HFC_RECEIVE_ON 0x4006
#define MISDN_CTRL_HFC_ECHOCAN_ON 0x4007
#define MISDN_CTRL_HFC_ECHOCAN_OFF 0x4008
-
+#define MISDN_CTRL_HFC_WD_INIT 0x4009
+#define MISDN_CTRL_HFC_WD_RESET 0x400A
/* socket options */
#define MISDN_TIME_STAMP 0x0001
--
1.6.0.2
next prev parent reply other threads:[~2009-05-22 21:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-22 20:42 [mISDN PATCH v2 00/19] mISDN patchset for next Karsten Keil
2009-05-22 21:04 ` Karsten Keil [this message]
2009-05-22 21:04 ` [mISDN PATCH v2 02/19] DSP now uses ring buffer for echo canceler Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 03/19] Echo canceler now gets delay information from hardware Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 04/19] Fixed missing spin lock on pipeline process Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 05/19] Reduce stack size in dsp_cmx_send() Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 07/19] Fix DTMF locking bug issue Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 06/19] Added layer-1-hold feature Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 08/19] Hardware acceleration is now possible in conjunction with audio recording Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 09/19] Fix TEI and SAPI handling Karsten Keil
2009-05-22 21:53 ` Sam Ravnborg
2009-05-23 13:00 ` Karsten Keil
2009-05-23 23:10 ` Sam Ravnborg
2009-05-24 15:39 ` Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 11/19] Add allocation of recvbuf[1500] at run time to reduce stack size Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 10/19] Add "sapi" information to debug messages Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 12/19] Fix skb leak in error cases Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 14/19] Add XHFC support for embedded Speech-Design board to hfcmulti Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 13/19] isdn: get_free_devid() failure ignored Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 16/19] Added PCI ID for new Junghanns.net Single E1 cards Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 15/19] Add PCI ID for Junghanns 8S card Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 17/19] Cleanup debug messages Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 18/19] Use kernel_{send,recv}msg instead of open coding Karsten Keil
2009-05-22 21:04 ` [mISDN PATCH v2 19/19] Fix DTMF detection enable/disable Karsten Keil
2009-05-25 7:53 ` [mISDN PATCH v2 00/19] mISDN patchset for next David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c9cf6a56ab02e09941e5916e1d71f0325fdbbb58.1243024967.git.kkeil@pingi.linux-pingi.de \
--to=keil@b1-systems.de \
--cc=davem@davemloft.net \
--cc=i4ldeveloper@listserv.isdn4linux.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®