From: Jan Kiszka <jan.kiszka@siemens.com>
To: Guenter Roeck <linux@roeck-us.net>, linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
linux-kernel@vger.kernel.org, "Awan,
Arsalan" <Arsalan_Awan@mentor.com>,
"Hombourger, Cedric" <Cedric_Hombourger@mentor.com>,
"Farnsworth, Wade" <wade_farnsworth@mentor.com>
Subject: Re: watchdog: sp5100_tco support for AMD V/R/E series
Date: Thu, 10 Sep 2020 08:09:07 +0200 [thread overview]
Message-ID: <bbb50d5f-869d-3a18-e568-ba541c9a2569@siemens.com> (raw)
In-Reply-To: <cfa0b445-d4c7-94e3-9585-579f0103a7eb@roeck-us.net>
On 09.09.20 18:04, Guenter Roeck wrote:
> On 9/7/20 1:45 PM, Guenter Roeck wrote:
>> On 9/7/20 12:18 PM, Guenter Roeck wrote:
>>> On 9/7/20 8:46 AM, Jan Kiszka wrote:
>>>> On 07.09.20 17:31, Guenter Roeck wrote:
>>>>> On 9/7/20 4:20 AM, Jan Kiszka wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> Arsalan reported that the upstream driver for sp5100_tco does not work
>>>>>> for embedded Ryzen. Meanwhile, I was able to confirm that on an R1505G:
>>>>>>
>>>>>> [ 11.607251] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
>>>>>> [ 11.607337] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
>>>>>> [ 11.607344] sp5100-tco sp5100-tco: Watchdog hardware is disabled
>>>>>>
>>>>>> ..and fix it:
>>>>>>
>>>>>> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
>>>>>> index 85e9664318c9..5482154fde42 100644
>>>>>> --- a/drivers/watchdog/sp5100_tco.c
>>>>>> +++ b/drivers/watchdog/sp5100_tco.c
>>>>>> @@ -193,7 +193,8 @@ static void tco_timer_enable(struct sp5100_tco *tco)
>>>>>> /* Set the Watchdog timer resolution to 1 sec and enable */
>>>>>> sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN3,
>>>>>> ~EFCH_PM_WATCHDOG_DISABLE,
>>>>>> - EFCH_PM_DECODEEN_SECOND_RES);
>>>>>> + EFCH_PM_DECODEEN_SECOND_RES |
>>>>>> + EFCH_PM_DECODEEN_WDT_TMREN);
>>>>>
>>>>> Confusing. The register in question is a 32-bit register, but only a byte
>>>>> is written into it. Bit 24-25 are supposed to be the resolution, bit 25-26
>>>>> set to 0 enable the watchdog. Bit 7 is supposed to enable MMIO decoding.
>>>>> This is from AMD Publication 52740. So something in the existing code
>>>>> is (or seems to be) wrong, but either case I don't see how setting bit 7
>>>>> (or 31 ?) would enable the watchdog hardware.
>>>>>
>>>>> Hmm, I wrote that code. Guess I'll need to to spend some time figuring out
>>>>> what is going on.
>>>>
>>>> The logic came from [1] which inspired [2] - that's where I pointed out
>>>> the large overlap with the existing upstream driver. I would love to see
>>>> all that consolidated.
>>>>
>>>> BTW, the R1505G is family 0x17. Maybe something changed there, and that
>>>> bit 7 was just reserved/ignored so far. ENOSPECS
>>>>
>>>
>>> Thanks for the pointers.
>>>
>>> I think you are talking about bit 31. Bit 7 is and was WatchdogTmrEn, but that
>>> supposedly only enables watchdog timer memory access at 0xfeb00000. From what
>>> I glance from the other drivers, the existing code is wrong. It should set
>>> the disable and resolution bits in register offset 3 (bit 24..27), not 0.
>>> In other words, EFCH_PM_DECODEEN3 should be defined as 0x03, not as 0x00.
>>> Which actually makes sense from the name.
>>>
>>> Playing with my hardware, turns out that setting bit 7 in EFCH_PM_DECODEEN
>>> (register offset 0) does indeed enable the watchdog. I'll need to check
>>> if it actually works. Either case, -ENOSPECS is really a problem here.
>>>
>>
>> ... and it does work. After playing with it, it seems that on Family 17h
>> CPUs EFCH_PM_DECODEEN_WDT_TMREN not only enables watchdog timer memory
>> access at 0xfeb0000, but also enables the watchdog itself.
>>
>> Also, turns out the documentation is now public, at least for some of the
>> Family 17h CPUs (though oddly enough not for all of them). See processor
>> reference manuals at https://www.amd.com/en/support/tech-docs. The documents
>> for model 18h and model 20h include a note stating that bit 7 of
>> EFCH_PM_DECODEEN enables both memory access and the watchdog hardware.
>>
>> So we'll need two patches - one to fix the value of EFCH_PM_DECODEEN3,
>> and one to enable the watchdog bit setting bit 7 of EFCH_PM_DECODEEN
>> for Family 17h CPUs.
>>
> Jan - any chance you can submit those patches ? Or do you want me to do it ?
Oh, I was reading your reply as if you were writing the patches. The
first one is definitely your finding, and while I can also see now what
is wrong and needed on 17h, I'm unsure about the rest. If you have a
better picture, please go ahead.
Jan
--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux
prev parent reply other threads:[~2020-09-10 6:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 11:20 Jan Kiszka
2020-09-07 15:31 ` Guenter Roeck
2020-09-07 15:46 ` Jan Kiszka
2020-09-07 19:18 ` Guenter Roeck
2020-09-07 20:45 ` Guenter Roeck
2020-09-09 16:04 ` Guenter Roeck
2020-09-10 6:09 ` Jan Kiszka [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bbb50d5f-869d-3a18-e568-ba541c9a2569@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=Arsalan_Awan@mentor.com \
--cc=Cedric_Hombourger@mentor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wade_farnsworth@mentor.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®