* [PATCH v5 2/2] regulator: rt5133: Add RT5133 PMIC regulator Support
2025-07-29 6:40 [PATCH v5 1/2] dt-bindings: regulator: Add Richtek RT5133 Support jeff_chang
@ 2025-07-29 6:40 ` jeff_chang
2025-07-29 6:59 ` [PATCH v5 1/2] dt-bindings: regulator: Add Richtek RT5133 Support Krzysztof Kozlowski
1 sibling, 0 replies; 3+ messages in thread
From: jeff_chang @ 2025-07-29 6:40 UTC (permalink / raw)
To: lgirdwood, broonie, robh, krzk+dt, conor+dt, linux-kernel, devicetree
Cc: jeff_chang
From: Jeff Chang <jeff_chang@richtek.com>
RT5133 is a highly-integrated chip. It includes 8 LDOs and 3 GPOs that can
be used to drive output high/low purpose. The dependency of the GPO block is
internally LDO1 Voltage.
Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
---
PATCH v5
1. Move oc-shutdown-all, pgb-shutdown-all properties to chip layer. Remove
of_parse_cb of regulators_desc.
2. Using vin as LDO7's and LDO8's supply_name.
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rt5133-regulator.c | 642 +++++++++++++++++++++++++++
3 files changed, 655 insertions(+)
create mode 100644 drivers/regulator/rt5133-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6d8988387da4..bada46e86cd0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1229,6 +1229,18 @@ config REGULATOR_RT5120
600mV to 1395mV, per step 6.250mV. The others are all fixed voltage
by external hardware circuit.
+config REGULATOR_RT5133
+ tristate "Richtek RT5133 PMIC Regulators"
+ depends on I2C && GPIOLIB && OF
+ select REGMAP
+ select CRC8
+ select OF_GPIO
+ help
+ This driver adds support for RT5133 PMIC regulators.
+ RT5133 is an integrated chip. It includes 8 LDOs and 3 GPOs that
+ can be used to drive output high/low purpose. The dependency of the
+ GPO block is internally LDO1 Voltage.
+
config REGULATOR_RT5190A
tristate "Richtek RT5190A PMIC"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index c0bc7a0f4e67..709384ae0a0c 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_REGULATOR_RT4803) += rt4803.o
obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
obj-$(CONFIG_REGULATOR_RT5120) += rt5120-regulator.o
+obj-$(CONFIG_REGULATOR_RT5133) += rt5133-regulator.o
obj-$(CONFIG_REGULATOR_RT5190A) += rt5190a-regulator.o
obj-$(CONFIG_REGULATOR_RT5739) += rt5739.o
obj-$(CONFIG_REGULATOR_RT5759) += rt5759-regulator.o
diff --git a/drivers/regulator/rt5133-regulator.c b/drivers/regulator/rt5133-regulator.c
new file mode 100644
index 000000000000..05c6e1659e7f
--- /dev/null
+++ b/drivers/regulator/rt5133-regulator.c
@@ -0,0 +1,642 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2025 Richtek Technology Corp.
+// Author: ChiYuan Huang <cy_huang@richtek.com>
+// Author: ShihChia Chang <jeff_chang@richtek.com>
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define RT5133_REG_CHIP_INFO 0x00
+#define RT5133_REG_RST_CTRL 0x06
+#define RT5133_REG_BASE_CTRL 0x09
+#define RT5133_REG_GPIO_CTRL 0x0B
+#define RT5133_REG_BASE_EVT 0x10
+#define RT5133_REG_LDO_PGB_STAT 0x15
+#define RT5133_REG_BASE_MASK 0x16
+#define RT5133_REG_LDO_SHDN 0x19
+#define RT5133_REG_LDO_ON 0x1A
+#define RT5133_REG_LDO_OFF 0x1B
+#define RT5133_REG_LDO1_CTRL1 0x20
+#define RT5133_REG_LDO1_CTRL2 0x21
+#define RT5133_REG_LDO1_CTRL3 0x22
+#define RT5133_REG_LDO2_CTRL1 0x24
+#define RT5133_REG_LDO2_CTRL2 0x25
+#define RT5133_REG_LDO2_CTRL3 0x26
+#define RT5133_REG_LDO3_CTRL1 0x28
+#define RT5133_REG_LDO3_CTRL2 0x29
+#define RT5133_REG_LDO3_CTRL3 0x2A
+#define RT5133_REG_LDO4_CTRL1 0x2C
+#define RT5133_REG_LDO4_CTRL2 0x2D
+#define RT5133_REG_LDO4_CTRL3 0x2E
+#define RT5133_REG_LDO5_CTRL1 0x30
+#define RT5133_REG_LDO5_CTRL2 0x31
+#define RT5133_REG_LDO5_CTRL3 0x32
+#define RT5133_REG_LDO6_CTRL1 0x34
+#define RT5133_REG_LDO6_CTRL2 0x35
+#define RT5133_REG_LDO6_CTRL3 0x36
+#define RT5133_REG_LDO7_CTRL1 0x38
+#define RT5133_REG_LDO7_CTRL2 0x39
+#define RT5133_REG_LDO7_CTRL3 0x3A
+#define RT5133_REG_LDO8_CTRL1 0x3C
+#define RT5133_REG_LDO8_CTRL2 0x3D
+#define RT5133_REG_LDO8_CTRL3 0x3E
+#define RT5133_REG_LDO8_CTRL4 0x3F
+
+#define RT5133_LDO_REG_BASE(_id) (0x20 + ((_id) - 1) * 4)
+
+#define RT5133_VENDOR_ID_MASK GENMASK(7, 4)
+#define RT5133_RESET_CODE 0xB1
+
+#define RT5133_FOFF_BASE_MASK BIT(1)
+#define RT5133_OCSHDN_ALL_MASK BIT(7)
+#define RT5133_OCSHDN_ALL_SHIFT (7)
+#define RT5133_PGBSHDN_ALL_MASK BIT(6)
+#define RT5133_PGBSHDN_ALL_SHIFT (6)
+
+#define RT5133_OCPTSEL_MASK BIT(5)
+#define RT5133_PGBPTSEL_MASK BIT(4)
+#define RT5133_STBTDSEL_MASK GENMASK(1, 0)
+
+#define RT5133_LDO_ENABLE_MASK BIT(7)
+#define RT5133_LDO_VSEL_MASK GENMASK(7, 5)
+#define RT5133_LDO_AD_MASK BIT(2)
+#define RT5133_LDO_SOFT_START_MASK GENMASK(1, 0)
+
+#define RT5133_GPIO_NR 3
+
+#define RT5133_LDO_PGB_EVT_MASK GENMASK(23, 16)
+#define RT5133_LDO_PGB_EVT_SHIFT 16
+#define RT5133_LDO_OC_EVT_MASK GENMASK(15, 8)
+#define RT5133_LDO_OC_EVT_SHIFT 8
+#define RT5133_VREF_EVT_MASK BIT(6)
+#define RT5133_BASE_EVT_MASK GENMASK(7, 0)
+#define RT5133_INTR_CLR_MASK GENMASK(23, 0)
+#define RT5133_INTR_BYTE_NR 3
+
+#define RT5133_MAX_I2C_BLOCK_SIZE 1
+
+#define RT5133_CRC8_POLYNOMIAL 0x7
+
+#define RT5133_I2C_ADDR_LEN 1
+#define RT5133_PREDATA_LEN 2
+#define RT5133_I2C_CRC_LEN 1
+#define RT5133_REG_ADDR_LEN 1
+#define RT5133_I2C_DUMMY_LEN 1
+
+#define I2C_ADDR_XLATE_8BIT(_addr, _rw) ((((_addr) & 0x7F) << 1) | (_rw))
+
+enum {
+ RT5133_REGULATOR_BASE = 0,
+ RT5133_REGULATOR_LDO1,
+ RT5133_REGULATOR_LDO2,
+ RT5133_REGULATOR_LDO3,
+ RT5133_REGULATOR_LDO4,
+ RT5133_REGULATOR_LDO5,
+ RT5133_REGULATOR_LDO6,
+ RT5133_REGULATOR_LDO7,
+ RT5133_REGULATOR_LDO8,
+ RT5133_REGULATOR_MAX
+};
+
+struct chip_data {
+ const struct regulator_desc *regulators;
+ const u8 vendor_id;
+};
+
+struct rt5133_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct gpio_desc *enable_gpio;
+ struct regulator_dev *rdev[RT5133_REGULATOR_MAX];
+ struct gpio_chip gc;
+ const struct chip_data *cdata;
+ unsigned int gpio_output_flag;
+ u8 crc8_tbls[CRC8_TABLE_SIZE];
+};
+
+static const unsigned int vout_type1_tables[] = {
+ 1800000, 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000
+};
+
+static const unsigned int vout_type2_tables[] = {
+ 1700000, 1800000, 1900000, 2500000, 2700000, 2800000, 2900000, 3000000
+};
+
+static const unsigned int vout_type3_tables[] = {
+ 900000, 950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1800000
+};
+
+static const unsigned int vout_type4_tables[] = {
+ 855000, 900000, 950000, 1000000, 1040000, 1090000, 1140000, 1710000
+};
+
+static const struct regulator_ops rt5133_regulator_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops rt5133_base_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+#define RT5133_REGULATOR_DESC(_name, _node_name, vtables, _supply) \
+{\
+ .name = #_name,\
+ .id = RT5133_REGULATOR_##_name,\
+ .of_match = of_match_ptr(#_node_name),\
+ .regulators_node = of_match_ptr("regulators"),\
+ .supply_name = _supply,\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .ops = &rt5133_regulator_ops,\
+ .n_voltages = ARRAY_SIZE(vtables),\
+ .volt_table = vtables,\
+ .enable_reg = RT5133_REG_##_name##_CTRL1,\
+ .enable_mask = RT5133_LDO_ENABLE_MASK,\
+ .vsel_reg = RT5133_REG_##_name##_CTRL2,\
+ .vsel_mask = RT5133_LDO_VSEL_MASK,\
+ .active_discharge_reg = RT5133_REG_##_name##_CTRL3,\
+ .active_discharge_mask = RT5133_LDO_AD_MASK,\
+}
+
+static const struct regulator_desc rt5133_regulators[] = {
+ /* For digital part, base current control */
+ {
+ .name = "rt5133,base",
+ .id = RT5133_REGULATOR_BASE,
+ .of_match = of_match_ptr("base"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &rt5133_base_regulator_ops,
+ .enable_reg = RT5133_REG_BASE_CTRL,
+ .enable_mask = RT5133_FOFF_BASE_MASK,
+ .enable_is_inverted = true,
+ },
+ RT5133_REGULATOR_DESC(LDO1, ldo1, vout_type1_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO2, ldo2, vout_type1_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO3, ldo3, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO4, ldo4, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO5, ldo5, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO6, ldo6, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO7, ldo7, vout_type3_tables, "vin"),
+ RT5133_REGULATOR_DESC(LDO8, ldo8, vout_type3_tables, "vin"),
+};
+
+static const struct regulator_desc rt5133a_regulators[] = {
+ /* For digital part, base current control */
+ {
+ .name = "rt5133,base",
+ .id = RT5133_REGULATOR_BASE,
+ .of_match = of_match_ptr("base"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &rt5133_base_regulator_ops,
+ .enable_reg = RT5133_REG_BASE_CTRL,
+ .enable_mask = RT5133_FOFF_BASE_MASK,
+ .enable_is_inverted = true,
+ },
+ RT5133_REGULATOR_DESC(LDO1, ldo1, vout_type1_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO2, ldo2, vout_type1_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO3, ldo3, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO4, ldo4, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO5, ldo5, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO6, ldo6, vout_type2_tables, "rt5133,base"),
+ RT5133_REGULATOR_DESC(LDO7, ldo7, vout_type3_tables, "vin"),
+ RT5133_REGULATOR_DESC(LDO8, ldo8, vout_type4_tables, "vin"),
+};
+
+static const struct chip_data regulator_data[] = {
+ { rt5133_regulators, 0x70},
+ { rt5133a_regulators, 0x80},
+};
+
+static int rt5133_gpio_direction_output(struct gpio_chip *gpio,
+ unsigned int offset, int value)
+{
+ struct rt5133_priv *priv = gpiochip_get_data(gpio);
+
+ if (offset >= RT5133_GPIO_NR)
+ return -EINVAL;
+
+ return regmap_update_bits(priv->regmap, RT5133_REG_GPIO_CTRL,
+ BIT(7 - offset) | BIT(3 - offset),
+ value ? BIT(7 - offset) | BIT(3 - offset) : 0);
+}
+
+static int rt5133_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rt5133_priv *priv = gpiochip_get_data(chip);
+
+ return !!(priv->gpio_output_flag & BIT(offset));
+}
+
+static int rt5133_get_gpioen_mask(unsigned int offset, unsigned int *mask)
+{
+ if (offset >= RT5133_GPIO_NR)
+ return -EINVAL;
+
+ *mask = (BIT(7 - offset) | BIT(3 - offset));
+
+ return 0;
+}
+
+static void rt5133_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int set_val)
+{
+ struct rt5133_priv *priv = gpiochip_get_data(chip);
+ unsigned int mask = 0, val = 0, next_flag = priv->gpio_output_flag;
+ int ret = 0;
+
+ ret = rt5133_get_gpioen_mask(offset, &mask);
+ if (ret) {
+ dev_err(priv->dev, "%s get gpion en mask failed, offset(%d)\n", __func__, offset);
+ return;
+ }
+
+ val = set_val ? mask : 0;
+
+ if (set_val)
+ next_flag |= BIT(offset);
+ else
+ next_flag &= ~BIT(offset);
+
+ ret = regmap_update_bits(priv->regmap, RT5133_REG_GPIO_CTRL, mask, val);
+ if (ret) {
+ dev_err(priv->dev, "Failed to set gpio [%d] val %d\n", offset,
+ set_val);
+ return;
+ }
+
+ priv->gpio_output_flag = next_flag;
+}
+
+static irqreturn_t rt5133_intr_handler(int irq_number, void *data)
+{
+ struct rt5133_priv *priv = data;
+ u32 intr_evts = 0, handle_evts;
+ int i, ret;
+
+ ret = regmap_bulk_read(priv->regmap, RT5133_REG_BASE_EVT, &intr_evts,
+ RT5133_INTR_BYTE_NR);
+ if (ret) {
+ dev_err(priv->dev, "%s, read event failed\n", __func__);
+ return IRQ_NONE;
+ }
+
+ handle_evts = intr_evts & RT5133_BASE_EVT_MASK;
+ /*
+ * VREF_EVT is a special case, if base off
+ * this event will also be trigger. Skip it
+ */
+ if (handle_evts & ~RT5133_VREF_EVT_MASK)
+ dev_dbg(priv->dev, "base event occurred [0x%02x]\n",
+ handle_evts);
+
+ handle_evts = (intr_evts & RT5133_LDO_OC_EVT_MASK) >>
+ RT5133_LDO_OC_EVT_SHIFT;
+
+ for (i = RT5133_REGULATOR_LDO1; i < RT5133_REGULATOR_MAX && handle_evts; i++) {
+ if (!(handle_evts & BIT(i - 1)))
+ continue;
+ regulator_notifier_call_chain(priv->rdev[i],
+ REGULATOR_EVENT_OVER_CURRENT,
+ &i);
+ }
+
+ handle_evts = (intr_evts & RT5133_LDO_PGB_EVT_MASK) >>
+ RT5133_LDO_PGB_EVT_SHIFT;
+ for (i = RT5133_REGULATOR_LDO1; i < RT5133_REGULATOR_MAX && handle_evts; i++) {
+ if (!(handle_evts & BIT(i - 1)))
+ continue;
+ regulator_notifier_call_chain(priv->rdev[i],
+ REGULATOR_EVENT_FAIL, &i);
+ }
+
+ ret = regmap_bulk_write(priv->regmap, RT5133_REG_BASE_EVT, &intr_evts,
+ RT5133_INTR_BYTE_NR);
+ if (ret)
+ dev_err(priv->dev, "%s, clear event failed\n", __func__);
+
+ return IRQ_HANDLED;
+}
+
+static int rt5133_enable_interrupts(int irq_no, struct rt5133_priv *priv)
+{
+ u32 mask = RT5133_INTR_CLR_MASK;
+ int ret;
+
+ /* Force to write clear all events */
+ ret = regmap_bulk_write(priv->regmap, RT5133_REG_BASE_EVT, &mask,
+ RT5133_INTR_BYTE_NR);
+ if (ret) {
+ dev_err(priv->dev, "Failed to clear all interrupts\n");
+ return ret;
+ }
+
+ /* Unmask all interrupts */
+ mask = 0;
+ ret = regmap_bulk_write(priv->regmap, RT5133_REG_BASE_MASK, &mask,
+ RT5133_INTR_BYTE_NR);
+ if (ret) {
+ dev_err(priv->dev, "Failed to unmask all interrupts\n");
+ return ret;
+ }
+
+ return devm_request_threaded_irq(priv->dev, irq_no, NULL,
+ rt5133_intr_handler, IRQF_ONESHOT,
+ dev_name(priv->dev), priv);
+}
+
+static int rt5133_regmap_hw_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf,
+ size_t val_size)
+{
+ struct rt5133_priv *priv = context;
+ struct i2c_client *client = to_i2c_client(priv->dev);
+ u8 reg = *(u8 *)reg_buf, crc;
+ u8 *buf;
+ int buf_len = RT5133_PREDATA_LEN + val_size + RT5133_I2C_CRC_LEN;
+ int read_len, ret;
+
+ buf = kzalloc(buf_len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = I2C_ADDR_XLATE_8BIT(client->addr, I2C_SMBUS_READ);
+ buf[1] = reg;
+
+ read_len = val_size + RT5133_I2C_CRC_LEN;
+ ret = i2c_smbus_read_i2c_block_data(client, reg, read_len,
+ buf + RT5133_PREDATA_LEN);
+
+ if (ret < 0)
+ goto out_read_err;
+
+ if (ret != read_len) {
+ ret = -EIO;
+ goto out_read_err;
+ }
+
+ crc = crc8(priv->crc8_tbls, buf, RT5133_PREDATA_LEN + val_size, 0);
+ if (crc != buf[RT5133_PREDATA_LEN + val_size]) {
+ ret = -EIO;
+ goto out_read_err;
+ }
+
+ memcpy(val_buf, buf + RT5133_PREDATA_LEN, val_size);
+ dev_dbg(priv->dev, "%s, reg = 0x%02x, data = 0x%02x\n", __func__, reg, *(u8 *)val_buf);
+
+out_read_err:
+ kfree(buf);
+ return (ret < 0) ? ret : 0;
+}
+
+static int rt5133_regmap_hw_write(void *context, const void *data, size_t count)
+{
+ struct rt5133_priv *priv = context;
+ struct i2c_client *client = to_i2c_client(priv->dev);
+ u8 reg = *(u8 *)data, crc;
+ u8 *buf;
+ int buf_len = RT5133_I2C_ADDR_LEN + count + RT5133_I2C_CRC_LEN +
+ RT5133_I2C_DUMMY_LEN;
+ int write_len, ret;
+
+ buf = kzalloc(buf_len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = I2C_ADDR_XLATE_8BIT(client->addr, I2C_SMBUS_WRITE);
+ buf[1] = reg;
+ memcpy(buf + RT5133_PREDATA_LEN, data + RT5133_REG_ADDR_LEN,
+ count - RT5133_REG_ADDR_LEN);
+
+ crc = crc8(priv->crc8_tbls, buf, RT5133_I2C_ADDR_LEN + count, 0);
+ buf[RT5133_I2C_ADDR_LEN + count] = crc;
+
+ write_len = count - RT5133_REG_ADDR_LEN + RT5133_I2C_CRC_LEN +
+ RT5133_I2C_DUMMY_LEN;
+ ret = i2c_smbus_write_i2c_block_data(client, reg, write_len,
+ buf + RT5133_PREDATA_LEN);
+
+ dev_dbg(priv->dev, "%s, reg = 0x%02x, data = 0x%02x\n", __func__, reg,
+ *(u8 *)(buf + RT5133_PREDATA_LEN));
+ kfree(buf);
+ return ret;
+}
+
+static const struct regmap_bus rt5133_regmap_bus = {
+ .read = rt5133_regmap_hw_read,
+ .write = rt5133_regmap_hw_write,
+ /* Due to crc, the block read/write length has the limit */
+ .max_raw_read = RT5133_MAX_I2C_BLOCK_SIZE,
+ .max_raw_write = RT5133_MAX_I2C_BLOCK_SIZE,
+};
+
+static bool rt5133_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT5133_REG_CHIP_INFO:
+ case RT5133_REG_BASE_EVT...RT5133_REG_LDO_PGB_STAT:
+ case RT5133_REG_LDO_ON...RT5133_REG_LDO_OFF:
+ case RT5133_REG_LDO1_CTRL1:
+ case RT5133_REG_LDO2_CTRL1:
+ case RT5133_REG_LDO3_CTRL1:
+ case RT5133_REG_LDO4_CTRL1:
+ case RT5133_REG_LDO5_CTRL1:
+ case RT5133_REG_LDO6_CTRL1:
+ case RT5133_REG_LDO7_CTRL1:
+ case RT5133_REG_LDO8_CTRL1:
+ return true;
+ default:
+ return false;
+ };
+}
+
+static const struct regmap_config rt5133_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RT5133_REG_LDO8_CTRL4,
+ .cache_type = REGCACHE_FLAT,
+ .num_reg_defaults_raw = RT5133_REG_LDO8_CTRL4 + 1,
+ .volatile_reg = rt5133_is_volatile_reg,
+};
+
+static int rt5133_chip_reset(struct rt5133_priv *priv)
+{
+ int ret;
+
+ ret = regmap_write(priv->regmap, RT5133_REG_RST_CTRL,
+ RT5133_RESET_CODE);
+ if (ret)
+ return ret;
+
+ /* Wait for register reset to take effect */
+ udelay(2);
+
+ return 0;
+}
+
+static int rt5133_validate_vendor_info(struct rt5133_priv *priv)
+{
+ unsigned int val = 0;
+ int i, ret;
+
+ ret = regmap_read(priv->regmap, RT5133_REG_CHIP_INFO, &val);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(regulator_data); i++) {
+ if ((val & RT5133_VENDOR_ID_MASK) ==
+ regulator_data[i].vendor_id){
+ priv->cdata = ®ulator_data[i];
+ break;
+ }
+ }
+ if (IS_ERR(priv->cdata)) {
+ dev_err(priv->dev, "Failed to find regualtor match version\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int rt5133_parse_dt(struct rt5133_priv *priv)
+{
+ unsigned int val = 0;
+ int ret = 0;
+
+ if (!device_property_read_bool(priv->dev, "richtek,oc-shutdown-all"))
+ val = 0;
+ else
+ val = 1 << RT5133_OCSHDN_ALL_SHIFT;
+ ret = regmap_update_bits(priv->regmap, RT5133_REG_LDO_SHDN,
+ RT5133_OCSHDN_ALL_MASK, val);
+ if (ret)
+ return ret;
+
+ if (!device_property_read_bool(priv->dev, "richtek,pgb-shutdown-all"))
+ val = 0;
+ else
+ val = 1 << RT5133_PGBSHDN_ALL_SHIFT;
+ return regmap_update_bits(priv->regmap, RT5133_REG_LDO_SHDN,
+ RT5133_PGBSHDN_ALL_MASK, val);
+}
+
+static int rt5133_probe(struct i2c_client *i2c)
+{
+ struct rt5133_priv *priv;
+ struct regulator_config config = {0};
+ int i, ret;
+
+ priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &i2c->dev;
+ crc8_populate_msb(priv->crc8_tbls, RT5133_CRC8_POLYNOMIAL);
+
+ priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->enable_gpio))
+ dev_err(&i2c->dev, "Failed to request HWEN gpio, check if default en=high\n");
+
+ priv->regmap = devm_regmap_init(&i2c->dev, &rt5133_regmap_bus, priv,
+ &rt5133_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ dev_err(&i2c->dev, "Failed to register regmap\n");
+ return PTR_ERR(priv->regmap);
+ }
+
+ ret = rt5133_validate_vendor_info(priv);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to check vendor info [%d]\n", ret);
+ return ret;
+ }
+
+ ret = rt5133_chip_reset(priv);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to execute sw reset\n");
+ return ret;
+ }
+
+ config.dev = &i2c->dev;
+ config.driver_data = priv;
+ config.regmap = priv->regmap;
+
+ for (i = 0; i < RT5133_REGULATOR_MAX; i++) {
+ priv->rdev[i] = devm_regulator_register(&i2c->dev,
+ priv->cdata->regulators + i,
+ &config);
+ if (IS_ERR(priv->rdev[i])) {
+ dev_err(&i2c->dev,
+ "Failed to register [%d] regulator\n", i);
+ return PTR_ERR(priv->rdev[i]);
+ }
+ }
+
+ ret = rt5133_parse_dt(priv);
+ if (ret) {
+ dev_err(&i2c->dev, "%s, Failed to parse dt\n", __func__);
+ return ret;
+ }
+
+ priv->gc.label = dev_name(&i2c->dev);
+ priv->gc.parent = &i2c->dev;
+ priv->gc.base = -1;
+ priv->gc.ngpio = RT5133_GPIO_NR;
+ priv->gc.set = rt5133_gpio_set;
+ priv->gc.get = rt5133_gpio_get;
+ priv->gc.direction_output = rt5133_gpio_direction_output;
+ priv->gc.can_sleep = true;
+
+ ret = devm_gpiochip_add_data(&i2c->dev, &priv->gc, priv);
+ if (ret)
+ return ret;
+
+ ret = rt5133_enable_interrupts(i2c->irq, priv);
+ if (ret) {
+ dev_err(&i2c->dev, "enable interrupt failed\n");
+ return ret;
+ }
+
+ i2c_set_clientdata(i2c, priv);
+
+ return ret;
+}
+
+static const struct of_device_id __maybe_unused rt5133_of_match_table[] = {
+ { .compatible = "richtek,rt5133", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rt5133_of_match_table);
+
+static struct i2c_driver rt5133_driver = {
+ .driver = {
+ .name = "rt5133",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = rt5133_of_match_table,
+ },
+ .probe = rt5133_probe,
+};
+module_i2c_driver(rt5133_driver);
+
+MODULE_DESCRIPTION("RT5133 Regulator Driver");
+MODULE_LICENSE("GPL v2");
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread