[PATCH] dt-bindings: tas2770: Fix I2C addresses for the TAS2770

[PATCH] dt-bindings: tas2770: Fix I2C addresses for the TAS2770

[Dan Murphy]

The I2C addresses listed in the yaml are not correct. The addresses can
range from 0x41 through 0x48 based on register configurations. Fix the
example and the description.

Fixes: 4b7151dadfd4 ("dt-bindings: ASoC: Add tas2770 smart PA dt bindings")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 Documentation/devicetree/bindings/sound/tas2770.yaml | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 33a90f829c80..bb26d081c9fa 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -24,7 +24,7 @@ properties:
   reg:
     maxItems: 1
     description: |
-       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+       I2C address of the device can be between 0x41 to 0x48.
 
   reset-gpio:
     description: GPIO used to reset the device.
@@ -62,9 +62,9 @@ examples:
    i2c0 {
      #address-cells = <1>;
      #size-cells = <0>;
-     codec: codec@4c {
+     codec: codec@41 {
        compatible = "ti,tas2770";
-       reg = <0x4c>;
+       reg = <0x41>;
        #sound-dai-cells = <1>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
-- 
2.28.0

Re: [PATCH] dt-bindings: tas2770: Fix I2C addresses for the TAS2770

[Dan Murphy]

All

On 9/18/20 11:43 AM, Dan Murphy wrote:
> The I2C addresses listed in the yaml are not correct. The addresses can
> range from 0x41 through 0x48 based on register configurations. Fix the
> example and the description.

Please ignore this patch I added this patch intp a different patch 
series because there were just that many fixes.

https://lore.kernel.org/patchwork/project/lkml/list/?series=463738

Dan

Re: [PATCH] dt-bindings: tas2770: Fix I2C addresses for the TAS2770

[Mark Brown]

On Fri, 18 Sep 2020 11:43:20 -0500, Dan Murphy wrote:
> The I2C addresses listed in the yaml are not correct. The addresses can
> range from 0x41 through 0x48 based on register configurations. Fix the
> example and the description.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] dt-bindings: tas2770: Fix I2C addresses for the TAS2770
      commit: b23d9eb897a1209e4d741fd69e5490f1b5b9e7cf

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark