* [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support
@ 2026-01-12 9:02 Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 1/5] media: dt-bindings: Add CAMSS device for Kaanapali Hangxiang Ma
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 9:02 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Hangxiang Ma, Krzysztof Kozlowski, Atiya Kailany
Add support for the RDI only CAMSS camera driver on Kaanapali. Enabling
RDI path involves adding the support for a set of CSIPHY, CSID and TFE
modules, with each TFE having multiple RDI ports. This hardware
architecture requires 'qdss_debug_xo' clock for CAMNOC to be functional.
Kaanapali camera subsystem provides:
- 3 x VFE, 5 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE Lite
- 3 x CSID
- 2 x CSID Lite
- 6 x CSI PHY
- 2 x ICP
- 1 x IPE
- 2 x JPEG DMA & Downscaler
- 2 x JPEG Encoder
- 1 x OFE
- 5 x RT CDM
- 3 x TPG
This series has been tested using the following commands with a
downstream driver for S5KJN5 sensor.
- media-ctl --reset
- media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F /dev/video0
Dependencies:
- https://lore.kernel.org/all/20260112-camss-extended-csiphy-macro-v2-1-ee7342f2aaf5@oss.qualcomm.com/
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
Changes in v11:
- Rebase this series due to conflict - bod
- Update binding commit message to align with previous generations
- Link to v10: https://lore.kernel.org/r/20251211-add-support-for-camss-on-kaanapali-v10-0-39e8874dcd27@oss.qualcomm.com
Changes in v10:
- Update interconnect and CX domain AXI clock names to be consistent with
previous generations - bod
- Update the struct name for csiphy lane register settings to make it reusable
for other compatible chipsets
- Updated power domain names to IFE for consistency - Krzysztof
- Add description for acronyms listed in binding commit message - Dmitry
- Link to v9: https://lore.kernel.org/r/20251208-add-support-for-camss-on-kaanapali-v9-0-3fcd31258415@oss.qualcomm.com
Changes in v9:
- Updates the names of some of the resources in DT bindings to be consistent
with previous generations and improve the commit its message. The name
changes are also applied to csiphy and vfe camss resource lists - bod
- Link to v8: https://lore.kernel.org/r/20251130-add-support-for-camss-on-kaanapali-v8-0-143a8265e6e8@oss.qualcomm.com
Changes in v8:
- Change csid and vfe driver file names as 'gen4' to reuse for other SOCs - bod
- Add missing register descriptions to binding and cover letter commit log - bod
- Link to v7: https://lore.kernel.org/r/20251120-add-support-for-camss-on-kaanapali-v7-0-de27f9a67ce6@oss.qualcomm.com
Changes in v7:
- Add ICP SYS registers to camss binding - bod
- Rename 'is_deferred' to 'reg_update_after_csid_config' to do rup/aup
after csid config to make it clearer and simplify its call path - bod
- Remove unnecessary bitwise AND while configuring image address to bus- bod
- Tidy up a comment and a couple of hex values and csid/vfe - bod
- Link to v6: https://lore.kernel.org/r/20251113-add-support-for-camss-on-kaanapali-v6-0-1e6038785a8e@oss.qualcomm.com
Changes in v6:
- Modified the bindings to represent the whole of the camera hardware on
KNP than just what is exercised by the CAMSS driver by extending the
descriptions and the properties, the regs, clocks, interrupts, power
domains, iommus etc. In addition, use the word 'vfe' everywhere in the
bindings to be clear that all of those resources are referring to the
same front end modules. - Krzysztof/bod
- Change camss vfe power domain names to align with the binding file
- Link to v5: https://lore.kernel.org/r/20251030-add-support-for-camss-on-kaanapali-v5-0-f8e12bea3d02@oss.qualcomm.com
Changes in v5:
- Refine v4 change log - Krzysztof
- Fix typo by removing redundant numerical version in kaanapali camss binding
comment description - Krzysztof
- Add missing tags that should be posted with v4 revision - Krzysztof/Andi
- Link to v4: https://lore.kernel.org/r/20251028-add-support-for-camss-on-kaanapali-v4-0-7eb484c89585@oss.qualcomm.com
Changes in v4:
- Add detailed hardware descriptions and revise message title to follow the
standard comment format for kaanapali camss binding file - Krzysztof
- Format kaanapali camss binding file to keep style consistency, by reverting
power domain name from TFE to IFE and keeping clocks name order as last
generation - Krzysztof
- Separate the 1.2 and 0.9 voltage supply DT flags for each CSIPHY to allow
for arbitrary board design with common or unique supplies to each of the PHYs
in kaanapali camss binding example, based on v2 comments - bod/Vladimir
- Link to v3: https://lore.kernel.org/r/20251023-add-support-for-camss-on-kaanapali-v3-0-02abc9a107bf@oss.qualcomm.com
Changes in v3:
- Use the name 'ahb' for 'cam_top_ahb' clock in cci binding file - Vladimir
- Reduce and simplify CSIPHY supply, port properties in camss bindings - Vladimir
- Resolve the dependency issues in the camss bindings file using ephemeral
DT nodes - Vladimir/Dmitry
- Update hf mnoc name and bandwidth values for icc module - bod
- Split CSIPHY status macro changes into a separate patch series - bod
- Add clear functions for AUP/RUP update in csid and vfe for consistency - bod
- Clarify why the RUP and AUP register update process is deferred - bod
- Clarify the necessity to keep NRT clocks for vfe - Vijay
- Link to v2: https://lore.kernel.org/r/20251014-add-support-for-camss-on-kaanapali-v2-0-f5745ba2dff9@oss.qualcomm.com
Changes in v2:
- Aggregate CSI2_RX_CFG0_PHY_SEL_BASE_IDX definition into 'camss-csid.h' - bod
- Remove 'camss-csid-1080.h' and use 'camss-csid-gen3.h' header instead - bod
- Remove redundant code in 'camss-csid-1080.c' and align the namespaces - bod
- Slipt 'camnoc_rt_axi' clock in vfe matching list into a single patch - bod
- Add whole vfe write engine client mappings in comment - bod
- Remove hardcoded image buffer number but use 'CAMSS_INIT_BUF_COUNT' - bod
- Remove SoC specific logic for vfe ops->reg_update and add a new variable
to determine whether ops->reg_update is deferred or not - bod
- Add description to explain why 'qdss_debug_xo' should be retained - bod
- Add the procss node in csiphy register list comment - bod
- Rename the variable 'cmn_status_offset' to 'common_status_offset' and
align this with macro in csiphy register structure to avoid ambiguity - bod
- Aggregate Kaanapali items into the definition that introduced by
'qcom,qcm2290-cci' in cci binding file - Loic
- Format 'kaanpali-camss.yaml' binding file
- Link to v1: https://lore.kernel.org/r/20250924-knp-cam-v1-0-b72d6deea054@oss.qualcomm.com
---
Hangxiang Ma (5):
media: dt-bindings: Add CAMSS device for Kaanapali
media: qcom: camss: Add Kaanapali compatible camss driver
media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
media: qcom: camss: csid: Add support for CSID gen4
media: qcom: camss: vfe: Add support for VFE gen4
.../bindings/media/qcom,kaanapali-camss.yaml | 646 +++++++++++++++++++++
drivers/media/platform/qcom/camss/Makefile | 2 +
drivers/media/platform/qcom/camss/camss-csid-680.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen3.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen4.c | 376 ++++++++++++
drivers/media/platform/qcom/camss/camss-csid.h | 11 +-
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 124 ++++
drivers/media/platform/qcom/camss/camss-vfe.c | 9 +-
drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
drivers/media/platform/qcom/camss/camss.c | 352 +++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
11 files changed, 1520 insertions(+), 5 deletions(-)
---
base-commit: 31d167f54de93f14fa8e4bc6cbc4adaf7019fd94
change-id: 20260112-kaanapali-camss-73772d44eff7
prerequisite-message-id: 20260112-camss-extended-csiphy-macro-v2-1-ee7342f2aaf5@oss.qualcomm.com
prerequisite-patch-id: 27c2ef96f0e747ec6b4bcf316d8802356e4cc3f4
Best regards,
--
Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v11 1/5] media: dt-bindings: Add CAMSS device for Kaanapali
2026-01-12 9:02 [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
@ 2026-01-12 9:02 ` Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 2/5] media: qcom: camss: Add Kaanapali compatible camss driver Hangxiang Ma
` (3 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 9:02 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Hangxiang Ma, Krzysztof Kozlowski
Add bindings for Camera Subsystem (CAMSS) on the Qualcomm Kaanapali
platform.
The Kaanapali platform provides:
- 3 x VFE (Video Front End), 5 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE Lite
- 3 x CSID (CSI Decoder)
- 2 x CSID Lite
- 6 x CSIPHY (CSI Physical Layer)
- 2 x ICP (Image Control Processor)
- 1 x IPE (Image Processing Engine)
- 2 x JPEG DMA & Downscaler
- 2 x JPEG Encoder
- 1 x OFE (Offline Front End)
- 5 x RT CDM (Camera Data Mover)
- 3 x TPG (Test Pattern Generator)
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
.../bindings/media/qcom,kaanapali-camss.yaml | 646 +++++++++++++++++++++
1 file changed, 646 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/qcom,kaanapali-camss.yaml b/Documentation/devicetree/bindings/media/qcom,kaanapali-camss.yaml
new file mode 100644
index 000000000000..7108a4f12f58
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,kaanapali-camss.yaml
@@ -0,0 +1,646 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,kaanapali-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Kaanapali Camera Subsystem (CAMSS)
+
+maintainers:
+ - Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
+
+description:
+ Kaanapali camera subsystem includes submodules such as CSIPHY (CSI Physical Layer)
+ and CSID (CSI Decoder), which comply with the MIPI CSI2 protocol.
+
+ The subsystem also integrates a set of real-time image processing engines and
+ their associated configuration modules, as well as non-real-time engines.
+
+ Additionally, it encompasses a test pattern generator (TPG) submodule.
+
+properties:
+ compatible:
+ const: qcom,kaanapali-camss
+
+ reg:
+ items:
+ - description: Registers for CSID 0
+ - description: Registers for CSID 1
+ - description: Registers for CSID 2
+ - description: Registers for CSID Lite 0
+ - description: Registers for CSID Lite 1
+ - description: Registers for CSIPHY 0
+ - description: Registers for CSIPHY 1
+ - description: Registers for CSIPHY 2
+ - description: Registers for CSIPHY 3
+ - description: Registers for CSIPHY 4
+ - description: Registers for CSIPHY 5
+ - description: Registers for VFE (Video Front End) 0
+ - description: Registers for VFE 1
+ - description: Registers for VFE 2
+ - description: Registers for VFE Lite 0
+ - description: Registers for VFE Lite 1
+ - description: Registers for ICP (Imaging Control Processor) 0
+ - description: Registers for ICP 0 SYS
+ - description: Registers for ICP 1
+ - description: Registers for ICP 1 SYS
+ - description: Registers for IPE (Image Processing Engine)
+ - description: Registers for JPEG DMA & Downscaler
+ - description: Registers for JPEG Encoder
+ - description: Registers for OFE (Offline Front End)
+ - description: Registers for RT CDM (Camera Data Mover) 0
+ - description: Registers for RT CDM 1
+ - description: Registers for RT CDM 2
+ - description: Registers for RT CDM 3
+ - description: Registers for RT CDM 4
+ - description: Registers for TPG 0
+ - description: Registers for TPG 1
+ - description: Registers for TPG 2
+
+ reg-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid_lite0
+ - const: csid_lite1
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: vfe0
+ - const: vfe1
+ - const: vfe2
+ - const: vfe_lite0
+ - const: vfe_lite1
+ - const: icp0
+ - const: icp0_sys
+ - const: icp1
+ - const: icp1_sys
+ - const: ipe
+ - const: jpeg_dma
+ - const: jpeg_enc
+ - const: ofe
+ - const: rt_cdm0
+ - const: rt_cdm1
+ - const: rt_cdm2
+ - const: rt_cdm3
+ - const: rt_cdm4
+ - const: tpg0
+ - const: tpg1
+ - const: tpg2
+
+ clocks:
+ maxItems: 60
+
+ clock-names:
+ items:
+ - const: camnoc_nrt_axi
+ - const: camnoc_rt_axi
+ - const: camnoc_rt_vfe0
+ - const: camnoc_rt_vfe1
+ - const: camnoc_rt_vfe2
+ - const: camnoc_rt_vfe_lite
+ - const: cpas_ahb
+ - const: cpas_fast_ahb
+ - const: csid
+ - const: csid_csiphy_rx
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: csiphy4
+ - const: csiphy4_timer
+ - const: csiphy5
+ - const: csiphy5_timer
+ - const: gcc_axi_hf
+ - const: vfe0
+ - const: vfe0_fast_ahb
+ - const: vfe1
+ - const: vfe1_fast_ahb
+ - const: vfe2
+ - const: vfe2_fast_ahb
+ - const: vfe_lite
+ - const: vfe_lite_ahb
+ - const: vfe_lite_cphy_rx
+ - const: vfe_lite_csid
+ - const: qdss_debug_xo
+ - const: camnoc_ipe_nps
+ - const: camnoc_ofe
+ - const: gcc_axi_sf
+ - const: icp0
+ - const: icp0_ahb
+ - const: icp1
+ - const: icp1_ahb
+ - const: ipe_nps
+ - const: ipe_nps_ahb
+ - const: ipe_nps_fast_ahb
+ - const: ipe_pps
+ - const: ipe_pps_fast_ahb
+ - const: jpeg
+ - const: ofe_ahb
+ - const: ofe_anchor
+ - const: ofe_anchor_fast_ahb
+ - const: ofe_hdr
+ - const: ofe_hdr_fast_ahb
+ - const: ofe_main
+ - const: ofe_main_fast_ahb
+ - const: vfe0_bayer
+ - const: vfe0_bayer_fast_ahb
+ - const: vfe1_bayer
+ - const: vfe1_bayer_fast_ahb
+ - const: vfe2_bayer
+ - const: vfe2_bayer_fast_ahb
+
+ interrupts:
+ maxItems: 30
+
+ interrupt-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid_lite0
+ - const: csid_lite1
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: vfe0
+ - const: vfe1
+ - const: vfe2
+ - const: vfe_lite0
+ - const: vfe_lite1
+ - const: camnoc_nrt
+ - const: camnoc_rt
+ - const: icp0
+ - const: icp1
+ - const: jpeg_dma
+ - const: jpeg_enc
+ - const: rt_cdm0
+ - const: rt_cdm1
+ - const: rt_cdm2
+ - const: rt_cdm3
+ - const: rt_cdm4
+ - const: tpg0
+ - const: tpg1
+ - const: tpg2
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: cam_ahb
+ - const: cam_hf_mnoc
+ - const: cam_sf_icp_mnoc
+ - const: cam_sf_mnoc
+
+ iommus:
+ items:
+ - description: VFE non-protected stream
+ - description: ICP0 shared stream
+ - description: ICP1 shared stream
+ - description: IPE CDM non-protected stream
+ - description: IPE non-protected stream
+ - description: JPEG non-protected stream
+ - description: OFE CDM non-protected stream
+ - description: OFE non-protected stream
+ - description: VFE / VFE Lite CDM non-protected stream
+
+ power-domains:
+ items:
+ - description:
+ IFE0 GDSC - Global Distributed Switch Controller for IFE0.
+ - description:
+ IFE1 GDSC - Global Distributed Switch Controller for IFE1.
+ - description:
+ IFE2 GDSC - Global Distributed Switch Controller for IFE2.
+ - description:
+ Titan GDSC - Global Distributed Switch Controller for the entire camss.
+ - description:
+ IPE GDSC - Global Distributed Switch Controller for IPE.
+ - description:
+ OFE GDSC - Block Global Distributed Switch Controller for OFE.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: ife2
+ - const: top
+ - const: ipe
+ - const: ofe
+
+ vdd-csiphy0-0p8-supply:
+ description:
+ Phandle to a 0.8V regulator supply to CSIPHY0 core block.
+
+ vdd-csiphy0-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY0 pll block.
+
+ vdd-csiphy1-0p8-supply:
+ description:
+ Phandle to a 0.8V regulator supply to CSIPHY1 core block.
+
+ vdd-csiphy1-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY1 pll block.
+
+ vdd-csiphy2-0p8-supply:
+ description:
+ Phandle to a 0.8V regulator supply to CSIPHY2 core block.
+
+ vdd-csiphy2-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY2 pll block.
+
+ vdd-csiphy3-0p8-supply:
+ description:
+ Phandle to a 0.8V regulator supply to CSIPHY3 core block.
+
+ vdd-csiphy3-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY3 pll block.
+
+ vdd-csiphy4-0p8-supply:
+ description:
+ Phandle to a 0.8V regulator supply to CSIPHY4 core block.
+
+ vdd-csiphy4-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY4 pll block.
+
+ vdd-csiphy5-0p8-supply:
+ description:
+ Phandle to a 0.8V regulator supply to CSIPHY5 core block.
+
+ vdd-csiphy5-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSIPHY5 pll block.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+patternProperties:
+ "^port@[0-5]$":
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input ports for receiving CSI data on CSIPHY 0-5.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - interconnects
+ - interconnect-names
+ - iommus
+ - power-domains
+ - power-domain-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ isp@9253000 {
+ compatible = "qcom,kaanapali-camss";
+
+ reg = <0x0 0x09253000 0x0 0x5e80>,
+ <0x0 0x09263000 0x0 0x5e80>,
+ <0x0 0x09273000 0x0 0x5e80>,
+ <0x0 0x092d3000 0x0 0x3880>,
+ <0x0 0x092e7000 0x0 0x3880>,
+ <0x0 0x09523000 0x0 0x2000>,
+ <0x0 0x09525000 0x0 0x2000>,
+ <0x0 0x09527000 0x0 0x2000>,
+ <0x0 0x09529000 0x0 0x2000>,
+ <0x0 0x0952b000 0x0 0x2000>,
+ <0x0 0x0952d000 0x0 0x2000>,
+ <0x0 0x09151000 0x0 0x20000>,
+ <0x0 0x09171000 0x0 0x20000>,
+ <0x0 0x09191000 0x0 0x20000>,
+ <0x0 0x092dc000 0x0 0x1300>,
+ <0x0 0x092f0000 0x0 0x1300>,
+ <0x0 0x0900e000 0x0 0x1000>,
+ <0x0 0x0900d000 0x0 0x1000>,
+ <0x0 0x0902e000 0x0 0x1000>,
+ <0x0 0x0902d000 0x0 0x1000>,
+ <0x0 0x090d7000 0x0 0x20000>,
+ <0x0 0x0904e000 0x0 0x1000>,
+ <0x0 0x0904d000 0x0 0x1000>,
+ <0x0 0x09057000 0x0 0x40000>,
+ <0x0 0x09147000 0x0 0x580>,
+ <0x0 0x09148000 0x0 0x580>,
+ <0x0 0x09149000 0x0 0x580>,
+ <0x0 0x0914a000 0x0 0x580>,
+ <0x0 0x0914b000 0x0 0x580>,
+ <0x0 0x093fd000 0x0 0x400>,
+ <0x0 0x093fe000 0x0 0x400>,
+ <0x0 0x093ff000 0x0 0x400>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1",
+ "icp0",
+ "icp0_sys",
+ "icp1",
+ "icp1_sys",
+ "ipe",
+ "jpeg_dma",
+ "jpeg_enc",
+ "ofe",
+ "rt_cdm0",
+ "rt_cdm1",
+ "rt_cdm2",
+ "rt_cdm3",
+ "rt_cdm4",
+ "tpg0",
+ "tpg1",
+ "tpg2";
+
+ clocks = <&camcc_cam_cc_camnoc_nrt_axi_clk>,
+ <&camcc_cam_cc_camnoc_rt_axi_clk>,
+ <&camcc_cam_cc_camnoc_rt_vfe_0_main_clk>,
+ <&camcc_cam_cc_camnoc_rt_vfe_1_main_clk>,
+ <&camcc_cam_cc_camnoc_rt_vfe_2_main_clk>,
+ <&camcc_cam_cc_camnoc_rt_vfe_lite_clk>,
+ <&camcc_cam_cc_cam_top_ahb_clk>,
+ <&camcc_cam_cc_cam_top_fast_ahb_clk>,
+ <&camcc_cam_cc_csid_clk>,
+ <&camcc_cam_cc_csid_csiphy_rx_clk>,
+ <&camcc_cam_cc_csiphy0_clk>,
+ <&camcc_cam_cc_csi0phytimer_clk>,
+ <&camcc_cam_cc_csiphy1_clk>,
+ <&camcc_cam_cc_csi1phytimer_clk>,
+ <&camcc_cam_cc_csiphy2_clk>,
+ <&camcc_cam_cc_csi2phytimer_clk>,
+ <&camcc_cam_cc_csiphy3_clk>,
+ <&camcc_cam_cc_csi3phytimer_clk>,
+ <&camcc_cam_cc_csiphy4_clk>,
+ <&camcc_cam_cc_csi4phytimer_clk>,
+ <&camcc_cam_cc_csiphy5_clk>,
+ <&camcc_cam_cc_csi5phytimer_clk>,
+ <&gcc_gcc_camera_hf_axi_clk>,
+ <&camcc_cam_cc_vfe_0_main_clk>,
+ <&camcc_cam_cc_vfe_0_main_fast_ahb_clk>,
+ <&camcc_cam_cc_vfe_1_main_clk>,
+ <&camcc_cam_cc_vfe_1_main_fast_ahb_clk>,
+ <&camcc_cam_cc_vfe_2_main_clk>,
+ <&camcc_cam_cc_vfe_2_main_fast_ahb_clk>,
+ <&camcc_cam_cc_vfe_lite_clk>,
+ <&camcc_cam_cc_vfe_lite_ahb_clk>,
+ <&camcc_cam_cc_vfe_lite_cphy_rx_clk>,
+ <&camcc_cam_cc_vfe_lite_csid_clk>,
+ <&camcc_cam_cc_qdss_debug_xo_clk>,
+ <&camcc_cam_cc_camnoc_nrt_ipe_nps_clk>,
+ <&camcc_cam_cc_camnoc_nrt_ofe_main_clk>,
+ <&gcc_gcc_camera_sf_axi_clk>,
+ <&camcc_cam_cc_icp_0_clk>,
+ <&camcc_cam_cc_icp_0_ahb_clk>,
+ <&camcc_cam_cc_icp_1_clk>,
+ <&camcc_cam_cc_icp_1_ahb_clk>,
+ <&camcc_cam_cc_ipe_nps_clk>,
+ <&camcc_cam_cc_ipe_nps_ahb_clk>,
+ <&camcc_cam_cc_ipe_nps_fast_ahb_clk>,
+ <&camcc_cam_cc_ipe_pps_clk>,
+ <&camcc_cam_cc_ipe_pps_fast_ahb_clk>,
+ <&camcc_cam_cc_jpeg_clk>,
+ <&camcc_cam_cc_ofe_ahb_clk>,
+ <&camcc_cam_cc_ofe_anchor_clk>,
+ <&camcc_cam_cc_ofe_anchor_fast_ahb_clk>,
+ <&camcc_cam_cc_ofe_hdr_clk>,
+ <&camcc_cam_cc_ofe_hdr_fast_ahb_clk>,
+ <&camcc_cam_cc_ofe_main_clk>,
+ <&camcc_cam_cc_ofe_main_fast_ahb_clk>,
+ <&camcc_cam_cc_vfe_0_bayer_clk>,
+ <&camcc_cam_cc_vfe_0_bayer_fast_ahb_clk>,
+ <&camcc_cam_cc_vfe_1_bayer_clk>,
+ <&camcc_cam_cc_vfe_1_bayer_fast_ahb_clk>,
+ <&camcc_cam_cc_vfe_2_bayer_clk>,
+ <&camcc_cam_cc_vfe_2_bayer_fast_ahb_clk>;
+ clock-names = "camnoc_nrt_axi",
+ "camnoc_rt_axi",
+ "camnoc_rt_vfe0",
+ "camnoc_rt_vfe1",
+ "camnoc_rt_vfe2",
+ "camnoc_rt_vfe_lite",
+ "cpas_ahb",
+ "cpas_fast_ahb",
+ "csid",
+ "csid_csiphy_rx",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "gcc_axi_hf",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe2",
+ "vfe2_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid",
+ "qdss_debug_xo",
+ "camnoc_ipe_nps",
+ "camnoc_ofe",
+ "gcc_axi_sf",
+ "icp0",
+ "icp0_ahb",
+ "icp1",
+ "icp1_ahb",
+ "ipe_nps",
+ "ipe_nps_ahb",
+ "ipe_nps_fast_ahb",
+ "ipe_pps",
+ "ipe_pps_fast_ahb",
+ "jpeg",
+ "ofe_ahb",
+ "ofe_anchor",
+ "ofe_anchor_fast_ahb",
+ "ofe_hdr",
+ "ofe_hdr_fast_ahb",
+ "ofe_main",
+ "ofe_main_fast_ahb",
+ "vfe0_bayer",
+ "vfe0_bayer_fast_ahb",
+ "vfe1_bayer",
+ "vfe1_bayer_fast_ahb",
+ "vfe2_bayer",
+ "vfe2_bayer_fast_ahb";
+
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 657 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 475 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 456 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 664 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 702 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 413 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 416 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1",
+ "camnoc_nrt",
+ "camnoc_rt",
+ "icp0",
+ "icp1",
+ "jpeg_dma",
+ "jpeg_enc",
+ "rt_cdm0",
+ "rt_cdm1",
+ "rt_cdm2",
+ "rt_cdm3",
+ "rt_cdm4",
+ "tpg0",
+ "tpg1",
+ "tpg2";
+
+ interconnects = <&gem_noc_master_appss_proc QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc_slave_camera_cfg QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc_master_camnoc_hf QCOM_ICC_TAG_ALWAYS
+ &mc_virt_slave_ebi1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc_master_camnoc_sf_icp QCOM_ICC_TAG_ALWAYS
+ &mc_virt_slave_ebi1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc_master_camnoc_sf QCOM_ICC_TAG_ALWAYS
+ &mc_virt_slave_ebi1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_icp_mnoc",
+ "cam_sf_mnoc";
+
+ iommus = <&apps_smmu 0x1c00 0x00>,
+ <&apps_smmu 0x18c0 0x00>,
+ <&apps_smmu 0x1980 0x00>,
+ <&apps_smmu 0x1840 0x00>,
+ <&apps_smmu 0x1800 0x00>,
+ <&apps_smmu 0x18a0 0x00>,
+ <&apps_smmu 0x1880 0x00>,
+ <&apps_smmu 0x1820 0x00>,
+ <&apps_smmu 0x1860 0x00>;
+
+ power-domains = <&camcc_cam_cc_ife_0_gdsc>,
+ <&camcc_cam_cc_ife_1_gdsc>,
+ <&camcc_cam_cc_ife_2_gdsc>,
+ <&camcc_cam_cc_titan_top_gdsc>,
+ <&camcc_cam_cc_ipe_gdsc>,
+ <&camcc_cam_cc_ofe_gdsc>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top",
+ "ipe",
+ "ofe";
+
+ vdd-csiphy0-0p8-supply = <&vreg_0p8_supply>;
+ vdd-csiphy0-1p2-supply = <&vreg_1p2_supply>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csiphy_ep0: endpoint {
+ data-lanes = <0 1>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v11 2/5] media: qcom: camss: Add Kaanapali compatible camss driver
2026-01-12 9:02 [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 1/5] media: dt-bindings: Add CAMSS device for Kaanapali Hangxiang Ma
@ 2026-01-12 9:02 ` Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY Hangxiang Ma
` (2 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 9:02 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel, Hangxiang Ma
Add support for Kaanapali in the camss driver. Add high level resource
information along with the bus bandwidth votes. Module level detailed
resource information will be enumerated in the following patches of the
series.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
drivers/media/platform/qcom/camss/camss.c | 22 ++++++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
2 files changed, 23 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index fcc2b2c3cba0..d07bde60b3a8 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -34,6 +34,20 @@
static const struct parent_dev_ops vfe_parent_dev_ops;
+static const struct resources_icc icc_res_kaanapali[] = {
+ {
+ .name = "cam_ahb",
+ .icc_bw_tbl.avg = 150000,
+ .icc_bw_tbl.peak = 300000,
+ },
+ /* Based on 4096 x 3072 30 FPS 2496 Mbps mode */
+ {
+ .name = "cam_hf_mnoc",
+ .icc_bw_tbl.avg = 471860,
+ .icc_bw_tbl.peak = 925857,
+ },
+};
+
static const struct camss_subdev_resources csiphy_res_8x16[] = {
/* CSIPHY0 */
{
@@ -4746,6 +4760,13 @@ static void camss_remove(struct platform_device *pdev)
camss_genpd_cleanup(camss);
}
+static const struct camss_resources kaanapali_resources = {
+ .version = CAMSS_KAANAPALI,
+ .pd_name = "top",
+ .icc_res = icc_res_kaanapali,
+ .icc_path_num = ARRAY_SIZE(icc_res_kaanapali),
+};
+
static const struct camss_resources msm8916_resources = {
.version = CAMSS_8x16,
.csiphy_res = csiphy_res_8x16,
@@ -4947,6 +4968,7 @@ static const struct camss_resources x1e80100_resources = {
};
static const struct of_device_id camss_dt_match[] = {
+ { .compatible = "qcom,kaanapali-camss", .data = &kaanapali_resources },
{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
{ .compatible = "qcom,msm8939-camss", .data = &msm8939_resources },
{ .compatible = "qcom,msm8953-camss", .data = &msm8953_resources },
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 9d9a62640e25..b1cc4825f027 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -92,6 +92,7 @@ enum camss_version {
CAMSS_8550,
CAMSS_8650,
CAMSS_8775P,
+ CAMSS_KAANAPALI,
CAMSS_X1E80100,
};
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
2026-01-12 9:02 [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 1/5] media: dt-bindings: Add CAMSS device for Kaanapali Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 2/5] media: qcom: camss: Add Kaanapali compatible camss driver Hangxiang Ma
@ 2026-01-12 9:02 ` Hangxiang Ma
2026-01-12 12:07 ` Bryan O'Donoghue
2026-01-12 12:08 ` Bryan O'Donoghue
2026-01-12 9:02 ` [PATCH v11 4/5] media: qcom: camss: csid: Add support for CSID gen4 Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 5/5] media: qcom: camss: vfe: Add support for VFE gen4 Hangxiang Ma
4 siblings, 2 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 9:02 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel, Hangxiang Ma
Add more detailed resource information for CSIPHY devices in the camss
driver along with the support for v2.4.0 in the 2 phase CSIPHY driver
that is responsible for the PHY lane register configuration, module
reset and interrupt handling.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 124 +++++++++++++++++++++
drivers/media/platform/qcom/camss/camss.c | 107 ++++++++++++++++++
2 files changed, 231 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 619abbf60781..27179af31dfa 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -683,6 +683,123 @@ csiphy_lane_regs lane_regs_sm8650[] = {
{0x0c10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
};
+/* 3nm 2PH v 2.4.0 2p5Gbps 4 lane DPHY mode */
+static const struct
+csiphy_lane_regs lane_regs_2_4_0[] = {
+ /* LN 0 */
+ {0x0094, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x00A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0090, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0098, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0094, 0x07, 0xd1, CSIPHY_DEFAULT_PARAMS},
+ {0x0030, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0000, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0020, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0008, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0094, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x005C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0060, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0064, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN 2 */
+ {0x0494, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x04A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0490, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0498, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0494, 0x07, 0xd1, CSIPHY_DEFAULT_PARAMS},
+ {0x0430, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0400, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0420, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0408, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0494, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x045C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0460, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0464, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN 4 */
+ {0x0894, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x08A0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0890, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0898, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0894, 0x07, 0xd1, CSIPHY_DEFAULT_PARAMS},
+ {0x0830, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0800, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0838, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x082C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0834, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x081C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0814, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x083C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0804, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0820, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0808, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0810, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0894, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x085C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0860, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0864, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN 6 */
+ {0x0C94, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0CA0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C90, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C98, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C94, 0x07, 0xd1, CSIPHY_DEFAULT_PARAMS},
+ {0x0C30, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C00, 0x8C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C38, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C2C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C34, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C1C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C14, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C3C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C04, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C20, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C08, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0C10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C94, 0xD7, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C5C, 0x54, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C60, 0xFD, 0x00, CSIPHY_SKEW_CAL},
+ {0x0C64, 0x7F, 0x00, CSIPHY_SKEW_CAL},
+
+ /* LN CLK */
+ {0x0E94, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0EA0, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E90, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E98, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E94, 0x07, 0xd1, CSIPHY_DEFAULT_PARAMS},
+ {0x0E30, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E28, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E00, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E0C, 0xFF, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E38, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E2C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E34, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E1C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E14, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E3C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E04, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E20, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0E08, 0x19, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0E10, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+};
+
/* 4nm 2PH v 2.1.2 2p5Gbps 4 lane DPHY mode */
static const struct
csiphy_lane_regs lane_regs_x1e80100[] = {
@@ -1012,6 +1129,7 @@ static bool csiphy_is_gen2(u32 version)
case CAMSS_8550:
case CAMSS_8650:
case CAMSS_8775P:
+ case CAMSS_KAANAPALI:
case CAMSS_X1E80100:
ret = true;
break;
@@ -1125,6 +1243,12 @@ static int csiphy_init(struct csiphy_device *csiphy)
regs->lane_regs = &lane_regs_sa8775p[0];
regs->lane_array_size = ARRAY_SIZE(lane_regs_sa8775p);
break;
+ case CAMSS_KAANAPALI:
+ regs->lane_regs = &lane_regs_2_4_0[0];
+ regs->lane_array_size = ARRAY_SIZE(lane_regs_2_4_0);
+ regs->offset = 0x1000;
+ regs->common_status_offset = 0x138;
+ break;
default:
break;
}
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index d07bde60b3a8..462d509a4a61 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -34,6 +34,111 @@
static const struct parent_dev_ops vfe_parent_dev_ops;
+static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
+ /* CSIPHY0 */
+ {
+ .regulators = { "vdd-csiphy0-0p8", "vdd-csiphy0-1p2" },
+ .clock = { "csiphy0", "csiphy0_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" },
+ .csiphy = {
+ .id = 0,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY1 */
+ {
+ .regulators = { "vdd-csiphy1-0p8", "vdd-csiphy1-1p2" },
+ .clock = { "csiphy1", "csiphy1_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" },
+ .csiphy = {
+ .id = 1,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY2 */
+ {
+ .regulators = { "vdd-csiphy2-0p8", "vdd-csiphy2-1p2" },
+ .clock = { "csiphy2", "csiphy2_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" },
+ .csiphy = {
+ .id = 2,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY3 */
+ {
+ .regulators = { "vdd-csiphy3-0p8", "vdd-csiphy3-1p2" },
+ .clock = { "csiphy3", "csiphy3_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" },
+ .csiphy = {
+ .id = 3,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY4 */
+ {
+ .regulators = { "vdd-csiphy4-0p8", "vdd-csiphy4-1p2" },
+ .clock = { "csiphy4", "csiphy4_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy4" },
+ .interrupt = { "csiphy4" },
+ .csiphy = {
+ .id = 4,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+ /* CSIPHY5 */
+ {
+ .regulators = { "vdd-csiphy5-0p8", "vdd-csiphy5-1p2" },
+ .clock = { "csiphy5", "csiphy5_timer",
+ "cpas_ahb", "cpas_fast_ahb" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "csiphy5" },
+ .interrupt = { "csiphy5" },
+ .csiphy = {
+ .id = 5,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+};
+
static const struct resources_icc icc_res_kaanapali[] = {
{
.name = "cam_ahb",
@@ -4763,8 +4868,10 @@ static void camss_remove(struct platform_device *pdev)
static const struct camss_resources kaanapali_resources = {
.version = CAMSS_KAANAPALI,
.pd_name = "top",
+ .csiphy_res = csiphy_res_kaanapali,
.icc_res = icc_res_kaanapali,
.icc_path_num = ARRAY_SIZE(icc_res_kaanapali),
+ .csiphy_num = ARRAY_SIZE(csiphy_res_kaanapali),
};
static const struct camss_resources msm8916_resources = {
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v11 4/5] media: qcom: camss: csid: Add support for CSID gen4
2026-01-12 9:02 [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
` (2 preceding siblings ...)
2026-01-12 9:02 ` [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY Hangxiang Ma
@ 2026-01-12 9:02 ` Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 5/5] media: qcom: camss: vfe: Add support for VFE gen4 Hangxiang Ma
4 siblings, 0 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 9:02 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Hangxiang Ma, Atiya Kailany
Add more detailed resource information for CSID devices along with the
driver for CSID gen4 that is responsible for CSID register configuration,
module reset and IRQ handling for BUF_DONE events. And aggregate a common
definition 'CSI2_RX_CFG0_PHY_SEL_BASE_IDX' into csid header file.
In this CSID version, RUP and AUP update values are split into two
registers along with a SET register. Accordingly, enhance the CSID
interface to accommodate both the legacy combined reg_update and the
split RUP and AUP updates.
Co-developed-by: Atiya Kailany <atiya.kailany@oss.qualcomm.com>
Signed-off-by: Atiya Kailany <atiya.kailany@oss.qualcomm.com>
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
drivers/media/platform/qcom/camss/camss-csid-680.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen3.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen4.c | 376 +++++++++++++++++++++
drivers/media/platform/qcom/camss/camss-csid.h | 11 +-
drivers/media/platform/qcom/camss/camss.c | 80 +++++
6 files changed, 467 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 5e349b491513..ba9faa635bd7 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -10,6 +10,7 @@ qcom-camss-objs += \
camss-csid-680.o \
camss-csid-gen2.o \
camss-csid-gen3.o \
+ camss-csid-gen4.o \
camss-csiphy-2ph-1-0.o \
camss-csiphy-3ph-1-0.o \
camss-csiphy.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-680.c b/drivers/media/platform/qcom/camss/camss-csid-680.c
index 3ad3a174bcfb..86134a23cd4e 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-680.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-680.c
@@ -101,7 +101,6 @@
#define CSI2_RX_CFG0_DL2_INPUT_SEL 12
#define CSI2_RX_CFG0_DL3_INPUT_SEL 16
#define CSI2_RX_CFG0_PHY_NUM_SEL 20
-#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
#define CSI2_RX_CFG0_PHY_TYPE_SEL 24
#define CSID_CSI2_RX_CFG1 0x204
diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen3.c b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
index 664245cf6eb0..f09b5575572a 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-gen3.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
@@ -103,7 +103,6 @@
#define CSID_RDI_IRQ_SUBSAMPLE_PERIOD(rdi) (csid_is_lite(csid) && IS_CSID_690(csid) ?\
(0x34C + 0x100 * (rdi)) :\
(0x54C + 0x100 * (rdi)))
-#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
static void __csid_configure_rx(struct csid_device *csid,
struct csid_phy_config *phy, int vc)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen4.c b/drivers/media/platform/qcom/camss/camss-csid-gen4.c
new file mode 100644
index 000000000000..b000bd3e9c2e
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen4.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-gen4.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include "camss.h"
+#include "camss-csid.h"
+#include "camss-csid-gen3.h"
+
+/* Reset and Command Registers */
+#define CSID_RST_CFG 0x108
+#define RST_MODE BIT(0)
+#define RST_LOCATION BIT(4)
+
+/* Reset and Command Registers */
+#define CSID_RST_CMD 0x10C
+#define SELECT_HW_RST BIT(0)
+#define SELECT_IRQ_RST BIT(2)
+#define CSID_IRQ_CMD 0x110
+#define IRQ_CMD_CLEAR BIT(0)
+
+/* Register Update Commands, RUP/AUP */
+#define CSID_RUP_CMD 0x114
+#define CSID_AUP_CMD 0x118
+#define CSID_RUP_AUP_RDI(rdi) (BIT(8) << (rdi))
+#define CSID_RUP_AUP_CMD 0x11C
+#define RUP_SET BIT(0)
+#define MUP BIT(4)
+
+/* Top level interrupt registers */
+#define CSID_TOP_IRQ_STATUS 0x180
+#define CSID_TOP_IRQ_MASK 0x184
+#define CSID_TOP_IRQ_CLEAR 0x188
+#define INFO_RST_DONE BIT(0)
+#define CSI2_RX_IRQ_STATUS BIT(2)
+#define BUF_DONE_IRQ_STATUS BIT(3)
+
+/* Buffer done interrupt registers */
+#define CSID_BUF_DONE_IRQ_STATUS 0x1A0
+#define BUF_DONE_IRQ_STATUS_RDI_OFFSET 16
+#define CSID_BUF_DONE_IRQ_MASK 0x1A4
+#define CSID_BUF_DONE_IRQ_CLEAR 0x1A8
+#define CSID_BUF_DONE_IRQ_SET 0x1AC
+
+/* CSI2 RX interrupt registers */
+#define CSID_CSI2_RX_IRQ_STATUS 0x1B0
+#define CSID_CSI2_RX_IRQ_MASK 0x1B4
+#define CSID_CSI2_RX_IRQ_CLEAR 0x1B8
+#define CSID_CSI2_RX_IRQ_SET 0x1BC
+
+/* CSI2 RX Configuration */
+#define CSID_CSI2_RX_CFG0 0x880
+#define CSI2_RX_CFG0_NUM_ACTIVE_LANES 0
+#define CSI2_RX_CFG0_DL0_INPUT_SEL 4
+#define CSI2_RX_CFG0_PHY_NUM_SEL 20
+#define CSID_CSI2_RX_CFG1 0x884
+#define CSI2_RX_CFG1_ECC_CORRECTION_EN BIT(0)
+#define CSI2_RX_CFG1_VC_MODE BIT(2)
+
+#define MSM_CSID_MAX_SRC_STREAMS_GEN4 (csid_is_lite(csid) ? 4 : 5)
+
+/* RDI Configuration */
+#define CSID_RDI_CFG0(rdi) \
+ ((csid_is_lite(csid) ? 0x3080 : 0x5480) + 0x200 * (rdi))
+#define RDI_CFG0_RETIME_BS BIT(5)
+#define RDI_CFG0_TIMESTAMP_EN BIT(6)
+#define RDI_CFG0_TIMESTAMP_STB_SEL BIT(8)
+#define RDI_CFG0_DECODE_FORMAT 12
+#define RDI_CFG0_DT 16
+#define RDI_CFG0_VC 22
+#define RDI_CFG0_EN BIT(31)
+
+/* RDI Control and Configuration */
+#define CSID_RDI_CTRL(rdi) \
+ ((csid_is_lite(csid) ? 0x3088 : 0x5488) + 0x200 * (rdi))
+#define RDI_CTRL_START_CMD BIT(0)
+
+#define CSID_RDI_CFG1(rdi) \
+ ((csid_is_lite(csid) ? 0x3094 : 0x5494) + 0x200 * (rdi))
+#define RDI_CFG1_DROP_H_EN BIT(5)
+#define RDI_CFG1_DROP_V_EN BIT(6)
+#define RDI_CFG1_CROP_H_EN BIT(7)
+#define RDI_CFG1_CROP_V_EN BIT(8)
+#define RDI_CFG1_PACKING_FORMAT_MIPI BIT(15)
+
+/* RDI Pixel Store Configuration */
+#define CSID_RDI_PIX_STORE_CFG0(rdi) (0x5498 + 0x200 * (rdi))
+#define RDI_PIX_STORE_CFG0_EN BIT(0)
+#define RDI_PIX_STORE_CFG0_MIN_HBI 1
+
+/* RDI IRQ Status in wrapper */
+#define CSID_CSI2_RDIN_IRQ_STATUS(rdi) (0x224 + (0x10 * (rdi)))
+#define CSID_CSI2_RDIN_IRQ_MASK(rdi) (0x228 + (0x10 * (rdi)))
+#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) (0x22C + (0x10 * (rdi)))
+#define INFO_RUP_DONE BIT(23)
+
+static void __csid_aup_rup_trigger(struct csid_device *csid)
+{
+ /* trigger SET in combined register */
+ writel(RUP_SET, csid->base + CSID_RUP_AUP_CMD);
+}
+
+static void __csid_aup_rup_clear(struct csid_device *csid, int port_id)
+{
+ /* Hardware clears the registers upon consuming the settings */
+ csid->aup_update &= ~CSID_RUP_AUP_RDI(port_id);
+ csid->rup_update &= ~CSID_RUP_AUP_RDI(port_id);
+}
+
+static void __csid_aup_update(struct csid_device *csid, int port_id)
+{
+ csid->aup_update |= CSID_RUP_AUP_RDI(port_id);
+ writel(csid->aup_update, csid->base + CSID_AUP_CMD);
+
+ __csid_aup_rup_trigger(csid);
+}
+
+static void __csid_reg_update(struct csid_device *csid, int port_id)
+{
+ csid->rup_update |= CSID_RUP_AUP_RDI(port_id);
+ writel(csid->rup_update, csid->base + CSID_RUP_CMD);
+
+ __csid_aup_rup_trigger(csid);
+}
+
+static void __csid_configure_rx(struct csid_device *csid,
+ struct csid_phy_config *phy)
+{
+ int val;
+
+ val = (phy->lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
+ val |= phy->lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
+ val |= (phy->csiphy_id + CSI2_RX_CFG0_PHY_SEL_BASE_IDX)
+ << CSI2_RX_CFG0_PHY_NUM_SEL;
+ writel(val, csid->base + CSID_CSI2_RX_CFG0);
+
+ val = CSI2_RX_CFG1_ECC_CORRECTION_EN;
+ writel(val, csid->base + CSID_CSI2_RX_CFG1);
+}
+
+static void __csid_configure_rx_vc(struct csid_device *csid, int vc)
+{
+ int val;
+
+ if (vc > 3) {
+ val = readl(csid->base + CSID_CSI2_RX_CFG1);
+ val |= CSI2_RX_CFG1_VC_MODE;
+ writel(val, csid->base + CSID_CSI2_RX_CFG1);
+ }
+}
+
+static void __csid_ctrl_rdi(struct csid_device *csid, int enable, u8 rdi)
+{
+ int val = 0;
+
+ if (enable)
+ val = RDI_CTRL_START_CMD;
+
+ writel(val, csid->base + CSID_RDI_CTRL(rdi));
+}
+
+static void __csid_configure_rdi_pix_store(struct csid_device *csid, u8 rdi)
+{
+ u32 val;
+
+ /* Configure pixel store to allow absorption of hblanking or idle time.
+ * This helps with horizontal crop and prevents line buffer conflicts.
+ * Reset state is 0x8 which has MIN_HBI=4, we keep the default MIN_HBI
+ * and just enable the pixel store functionality.
+ */
+ val = (4 << RDI_PIX_STORE_CFG0_MIN_HBI) | RDI_PIX_STORE_CFG0_EN;
+ writel(val, csid->base + CSID_RDI_PIX_STORE_CFG0(rdi));
+}
+
+static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 vc)
+{
+ u32 val;
+ u8 lane_cnt = csid->phy.lane_cnt;
+
+ /* Source pads matching RDI channels on hardware.
+ * E.g. Pad 1 -> RDI0, Pad 2 -> RDI1, etc.
+ */
+ struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
+ const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
+ csid->res->formats->nformats,
+ input_format->code);
+
+ if (!lane_cnt)
+ lane_cnt = 4;
+
+ val = RDI_CFG0_TIMESTAMP_EN;
+ val |= RDI_CFG0_TIMESTAMP_STB_SEL;
+ val |= RDI_CFG0_RETIME_BS;
+
+ /* note: for non-RDI path, this should be format->decode_format */
+ val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
+ val |= vc << RDI_CFG0_VC;
+ val |= format->data_type << RDI_CFG0_DT;
+ writel(val, csid->base + CSID_RDI_CFG0(vc));
+
+ val = RDI_CFG1_PACKING_FORMAT_MIPI;
+ writel(val, csid->base + CSID_RDI_CFG1(vc));
+
+ /* Configure pixel store using dedicated register in gen4 */
+ if (!csid_is_lite(csid))
+ __csid_configure_rdi_pix_store(csid, vc);
+
+ val = 0;
+ writel(val, csid->base + CSID_RDI_CTRL(vc));
+
+ val = readl(csid->base + CSID_RDI_CFG0(vc));
+
+ if (enable)
+ val |= RDI_CFG0_EN;
+
+ writel(val, csid->base + CSID_RDI_CFG0(vc));
+}
+
+static void csid_configure_stream(struct csid_device *csid, u8 enable)
+{
+ u8 i;
+ u8 vc;
+
+ __csid_configure_rx(csid, &csid->phy);
+
+ for (vc = 0; vc < MSM_CSID_MAX_SRC_STREAMS_GEN4; vc++) {
+ if (csid->phy.en_vc & BIT(vc)) {
+ __csid_configure_rdi_stream(csid, enable, vc);
+ __csid_configure_rx_vc(csid, vc);
+
+ for (i = 0; i < CAMSS_INIT_BUF_COUNT; i++)
+ __csid_aup_update(csid, vc);
+
+ __csid_reg_update(csid, vc);
+
+ __csid_ctrl_rdi(csid, enable, vc);
+ }
+ }
+}
+
+static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
+{
+ return 0;
+}
+
+static void csid_subdev_reg_update(struct csid_device *csid, int port_id,
+ bool clear)
+{
+ if (clear)
+ __csid_aup_rup_clear(csid, port_id);
+ else
+ __csid_aup_update(csid, port_id);
+}
+
+/**
+ * csid_isr - CSID module interrupt service routine
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csid_isr(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 val, buf_done_val;
+ u8 reset_done;
+ int i;
+
+ val = readl(csid->base + CSID_TOP_IRQ_STATUS);
+ writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
+
+ reset_done = val & INFO_RST_DONE;
+
+ buf_done_val = readl(csid->base + CSID_BUF_DONE_IRQ_STATUS);
+ writel(buf_done_val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
+
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_GEN4; i++) {
+ if (csid->phy.en_vc & BIT(i)) {
+ val = readl(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i));
+ writel(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
+
+ if (val & INFO_RUP_DONE)
+ csid_subdev_reg_update(csid, i, true);
+
+ if (buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i))
+ camss_buf_done(csid->camss, csid->id, i);
+ }
+ }
+
+ val = IRQ_CMD_CLEAR;
+ writel(val, csid->base + CSID_IRQ_CMD);
+
+ if (reset_done)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * csid_reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_reset(struct csid_device *csid)
+{
+ unsigned long time;
+ u32 val;
+ int i;
+
+ reinit_completion(&csid->reset_complete);
+
+ val = INFO_RST_DONE | BUF_DONE_IRQ_STATUS;
+ writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
+ writel(val, csid->base + CSID_TOP_IRQ_MASK);
+
+ val = 0;
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_GEN4; i++) {
+ if (csid->phy.en_vc & BIT(i)) {
+ /*
+ * Only need to clear buf done IRQ status here,
+ * RUP done IRQ status will be cleared once isr
+ * strobe generated by CSID_RST_CMD
+ */
+ val |= BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i);
+ }
+ }
+ writel(val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
+ writel(val, csid->base + CSID_BUF_DONE_IRQ_MASK);
+
+ /* Clear all IRQ status with CLEAR bits set */
+ val = IRQ_CMD_CLEAR;
+ writel(val, csid->base + CSID_IRQ_CMD);
+
+ val = RST_LOCATION | RST_MODE;
+ writel(val, csid->base + CSID_RST_CFG);
+
+ val = SELECT_HW_RST | SELECT_IRQ_RST;
+ writel(val, csid->base + CSID_RST_CMD);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+
+ if (!time) {
+ dev_err(csid->camss->dev, "CSID reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void csid_subdev_init(struct csid_device *csid)
+{
+ csid->testgen.nmodes = CSID_PAYLOAD_MODE_DISABLED;
+}
+
+const struct csid_hw_ops csid_ops_gen4 = {
+ .configure_stream = csid_configure_stream,
+ .configure_testgen_pattern = csid_configure_testgen_pattern,
+ .hw_version = csid_hw_version,
+ .isr = csid_isr,
+ .reset = csid_reset,
+ .src_pad_code = csid_src_pad_code,
+ .subdev_init = csid_subdev_init,
+ .reg_update = csid_subdev_reg_update,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index aedc96ed84b2..75a113050eb1 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -27,6 +27,8 @@
/* CSID hardware can demultiplex up to 4 outputs */
#define MSM_CSID_MAX_SRC_STREAMS 4
+/* CSIPHY to hardware PHY selector mapping */
+#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
#define CSID_RESET_TIMEOUT_MS 500
enum csid_testgen_mode {
@@ -154,7 +156,13 @@ struct csid_device {
void __iomem *base;
u32 irq;
char irq_name[30];
- u32 reg_update;
+ union {
+ u32 reg_update;
+ struct {
+ u32 rup_update;
+ u32 aup_update;
+ };
+ };
struct camss_clock *clock;
int nclocks;
struct regulator_bulk_data *supplies;
@@ -217,6 +225,7 @@ extern const struct csid_hw_ops csid_ops_340;
extern const struct csid_hw_ops csid_ops_680;
extern const struct csid_hw_ops csid_ops_gen2;
extern const struct csid_hw_ops csid_ops_gen3;
+extern const struct csid_hw_ops csid_ops_gen4;
/*
* csid_is_lite - Check if CSID is CSID lite.
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 462d509a4a61..d292364d1701 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -139,6 +139,84 @@ static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
},
};
+static const struct camss_subdev_resources csid_res_kaanapali[] = {
+ /* CSID0 */
+ {
+ .regulators = {},
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_gen4,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID1 */
+ {
+ .regulators = {},
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_gen4,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID2 */
+ {
+ .regulators = {},
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_gen4,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID_LITE0 */
+ {
+ .regulators = {},
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid_lite0" },
+ .interrupt = { "csid_lite0" },
+ .csid = {
+ .is_lite = true,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_gen4,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID_LITE1 */
+ {
+ .regulators = {},
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid_lite1" },
+ .interrupt = { "csid_lite1" },
+ .csid = {
+ .is_lite = true,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_gen4,
+ .formats = &csid_formats_gen2
+ }
+ }
+};
+
static const struct resources_icc icc_res_kaanapali[] = {
{
.name = "cam_ahb",
@@ -4869,9 +4947,11 @@ static const struct camss_resources kaanapali_resources = {
.version = CAMSS_KAANAPALI,
.pd_name = "top",
.csiphy_res = csiphy_res_kaanapali,
+ .csid_res = csid_res_kaanapali,
.icc_res = icc_res_kaanapali,
.icc_path_num = ARRAY_SIZE(icc_res_kaanapali),
.csiphy_num = ARRAY_SIZE(csiphy_res_kaanapali),
+ .csid_num = ARRAY_SIZE(csid_res_kaanapali),
};
static const struct camss_resources msm8916_resources = {
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v11 5/5] media: qcom: camss: vfe: Add support for VFE gen4
2026-01-12 9:02 [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
` (3 preceding siblings ...)
2026-01-12 9:02 ` [PATCH v11 4/5] media: qcom: camss: csid: Add support for CSID gen4 Hangxiang Ma
@ 2026-01-12 9:02 ` Hangxiang Ma
4 siblings, 0 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 9:02 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Hangxiang Ma, Atiya Kailany
Add Video Front End (VFE) version gen4 as found on the Kaanapali SoC.
The FULL front end modules in Kaanapali camera subsystem are called TFEs
(Thin Front End), however, retaining the name VFE at places to maintain
consistency and avoid unnecessary code changes.
This change limits the VFE output lines to 3 for now as constrained by
the CAMSS driver framework.
Kaanapali architecture requires for the REG_UPDATE and AUP_UPDATE to be
issued after all of the CSID configuration has been done. Additionally,
the number of AUP_UPDATEs should match the number of buffers enqueued to
the write master while it's being enabled.
Although the real time data from TFE goes through the RT_CAMNOC, we are
required to enable both the camnoc_rt_axi and camnoc_nrt_axi clocks for
the PDX_NOC, that follows both the RT and NRT NOCs in this architecture,
to ensure that both of the latter are idle after reset.
Co-developed-by: Atiya Kailany <atiya.kailany@oss.qualcomm.com>
Signed-off-by: Atiya Kailany <atiya.kailany@oss.qualcomm.com>
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
drivers/media/platform/qcom/camss/camss-vfe.c | 9 +-
drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
drivers/media/platform/qcom/camss/camss.c | 143 ++++++++++++++++++++++++++
4 files changed, 153 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index ba9faa635bd7..ed8001ef90a6 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -23,6 +23,7 @@ qcom-camss-objs += \
camss-vfe-480.o \
camss-vfe-680.o \
camss-vfe-gen3.o \
+ camss-vfe-gen4.o \
camss-vfe-gen1.o \
camss-vfe-vbif.o \
camss-vfe.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 9c7ad8aa4058..399be8b70fed 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -351,6 +351,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_8550:
case CAMSS_8650:
case CAMSS_8775P:
+ case CAMSS_KAANAPALI:
case CAMSS_X1E80100:
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
@@ -523,7 +524,8 @@ int vfe_enable_output_v2(struct vfe_line *line)
spin_lock_irqsave(&vfe->output_lock, flags);
- ops->reg_update_clear(vfe, line->id);
+ if (ops->reg_update_clear)
+ ops->reg_update_clear(vfe, line->id);
if (output->state > VFE_OUTPUT_RESERVED) {
dev_err(vfe->camss->dev,
@@ -550,7 +552,9 @@ int vfe_enable_output_v2(struct vfe_line *line)
output->gen2.active_num++;
ops->vfe_wm_update(vfe, output->wm_idx[0],
output->buf[i]->addr[0], line);
- ops->reg_update(vfe, line->id);
+
+ if (!vfe->res->reg_update_after_csid_config)
+ ops->reg_update(vfe, line->id);
}
spin_unlock_irqrestore(&vfe->output_lock, flags);
@@ -2009,6 +2013,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
case CAMSS_8550:
case CAMSS_8650:
case CAMSS_8775P:
+ case CAMSS_KAANAPALI:
case CAMSS_X1E80100:
ret = 16;
break;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index ae9dad353a37..c402ef170c81 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -133,6 +133,7 @@ struct vfe_isr_ops {
struct vfe_subdev_resources {
bool is_lite;
+ bool reg_update_after_csid_config;
u8 line_num;
bool has_pd;
char *pd_name;
@@ -249,6 +250,7 @@ extern const struct vfe_hw_ops vfe_ops_340;
extern const struct vfe_hw_ops vfe_ops_480;
extern const struct vfe_hw_ops vfe_ops_680;
extern const struct vfe_hw_ops vfe_ops_gen3;
+extern const struct vfe_hw_ops vfe_ops_gen4;
int vfe_get(struct vfe_device *vfe);
void vfe_put(struct vfe_device *vfe);
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index d292364d1701..2bd4e0934c09 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -217,6 +217,147 @@ static const struct camss_subdev_resources csid_res_kaanapali[] = {
}
};
+/* In Kaanapali, CAMNOC requires all CAMNOC_RT_TFEX clocks
+ * to operate on any TFE Full.
+ */
+static const struct camss_subdev_resources vfe_res_kaanapali[] = {
+ /* VFE0 - TFE Full */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "vfe0_fast_ahb", "vfe0",
+ "camnoc_rt_vfe0", "camnoc_rt_vfe1", "camnoc_rt_vfe2",
+ "camnoc_rt_axi", "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 360280000, 480000000, 630000000, 716000000,
+ 833000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .reg_update_after_csid_config = true,
+ .has_pd = true,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE1 - TFE Full */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "vfe1_fast_ahb", "vfe1",
+ "camnoc_rt_vfe0", "camnoc_rt_vfe1", "camnoc_rt_vfe2",
+ "camnoc_rt_axi", "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 360280000, 480000000, 630000000, 716000000,
+ 833000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .reg_update_after_csid_config = true,
+ .has_pd = true,
+ .pd_name = "ife1",
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE2 - TFE Full */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "vfe2_fast_ahb", "vfe2",
+ "camnoc_rt_vfe0", "camnoc_rt_vfe1", "camnoc_rt_vfe2",
+ "camnoc_rt_axi", "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 360280000, 480000000, 630000000, 716000000,
+ 833000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe2" },
+ .interrupt = { "vfe2" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .reg_update_after_csid_config = true,
+ .has_pd = true,
+ .pd_name = "ife2",
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE3 - IFE Lite */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "vfe_lite_ahb", "vfe_lite",
+ "camnoc_rt_vfe_lite", "camnoc_rt_axi",
+ "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 266666667, 400000000, 480000000 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .reg_update_after_csid_config = true,
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE4 - IFE Lite */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "vfe_lite_ahb", "vfe_lite",
+ "camnoc_rt_vfe_lite", "camnoc_rt_axi",
+ "camnoc_nrt_axi", "qdss_debug_xo" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 266666667, 400000000, 480000000 },
+ { 0 },
+ { 200000000, 300000000, 400000000, 480000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .reg_update_after_csid_config = true,
+ .hw_ops = &vfe_ops_gen4,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+};
+
static const struct resources_icc icc_res_kaanapali[] = {
{
.name = "cam_ahb",
@@ -4948,10 +5089,12 @@ static const struct camss_resources kaanapali_resources = {
.pd_name = "top",
.csiphy_res = csiphy_res_kaanapali,
.csid_res = csid_res_kaanapali,
+ .vfe_res = vfe_res_kaanapali,
.icc_res = icc_res_kaanapali,
.icc_path_num = ARRAY_SIZE(icc_res_kaanapali),
.csiphy_num = ARRAY_SIZE(csiphy_res_kaanapali),
.csid_num = ARRAY_SIZE(csid_res_kaanapali),
+ .vfe_num = ARRAY_SIZE(vfe_res_kaanapali),
};
static const struct camss_resources msm8916_resources = {
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
2026-01-12 9:02 ` [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY Hangxiang Ma
@ 2026-01-12 12:07 ` Bryan O'Donoghue
2026-01-12 15:13 ` Hangxiang Ma
2026-01-12 12:08 ` Bryan O'Donoghue
1 sibling, 1 reply; 9+ messages in thread
From: Bryan O'Donoghue @ 2026-01-12 12:07 UTC (permalink / raw)
To: Hangxiang Ma, Robert Foss, Todor Tomov, Vladimir Zapolskiy,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel
On 12/01/2026 09:02, Hangxiang Ma wrote:
> Add more detailed resource information for CSIPHY devices in the camss
> driver along with the support for v2.4.0 in the 2 phase CSIPHY driver
> that is responsible for the PHY lane register configuration, module
> reset and interrupt handling.
>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
> ---
> +static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
> + /* CSIPHY0 */
> + {
> + .regulators = { "vdd-csiphy0-0p8", "vdd-csiphy0-1p2" },
Please sync up with Wenmeng's patch:
https://lore.kernel.org/linux-arm-msm/20251114082649.4240-1-wenmeng.liu@oss.qualcomm.com/
---
bod
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
2026-01-12 9:02 ` [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY Hangxiang Ma
2026-01-12 12:07 ` Bryan O'Donoghue
@ 2026-01-12 12:08 ` Bryan O'Donoghue
1 sibling, 0 replies; 9+ messages in thread
From: Bryan O'Donoghue @ 2026-01-12 12:08 UTC (permalink / raw)
To: Hangxiang Ma, Robert Foss, Todor Tomov, Vladimir Zapolskiy,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel
On 12/01/2026 09:02, Hangxiang Ma wrote:
> static const struct parent_dev_ops vfe_parent_dev_ops;
>
> +static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
> + /* CSIPHY0 */
> + {
> + .regulators = { "vdd-csiphy0-0p8", "vdd-csiphy0-1p2" },
The convention in this file so far is to add new entries at the end.
Since you need to v12 this, please do that too.
---
bod
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
2026-01-12 12:07 ` Bryan O'Donoghue
@ 2026-01-12 15:13 ` Hangxiang Ma
0 siblings, 0 replies; 9+ messages in thread
From: Hangxiang Ma @ 2026-01-12 15:13 UTC (permalink / raw)
To: Bryan O'Donoghue, Robert Foss, Todor Tomov,
Vladimir Zapolskiy, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel
On 1/12/2026 8:07 PM, Bryan O'Donoghue wrote:
> On 12/01/2026 09:02, Hangxiang Ma wrote:
>> Add more detailed resource information for CSIPHY devices in the camss
>> driver along with the support for v2.4.0 in the 2 phase CSIPHY driver
>> that is responsible for the PHY lane register configuration, module
>> reset and interrupt handling.
>>
>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
>> ---
>
>
>> +static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
>> + /* CSIPHY0 */
>> + {
>> + .regulators = { "vdd-csiphy0-0p8", "vdd-csiphy0-1p2" },
>
> Please sync up with Wenmeng's patch:
>
> https://lore.kernel.org/linux-arm-msm/20251114082649.4240-1-
> wenmeng.liu@oss.qualcomm.com/
>
> ---
> bod
Ack. I'll rebase accordingly.
Best Regards,
Hangxiang
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2026-01-12 15:13 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-01-12 9:02 [PATCH v11 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 1/5] media: dt-bindings: Add CAMSS device for Kaanapali Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 2/5] media: qcom: camss: Add Kaanapali compatible camss driver Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY Hangxiang Ma
2026-01-12 12:07 ` Bryan O'Donoghue
2026-01-12 15:13 ` Hangxiang Ma
2026-01-12 12:08 ` Bryan O'Donoghue
2026-01-12 9:02 ` [PATCH v11 4/5] media: qcom: camss: csid: Add support for CSID gen4 Hangxiang Ma
2026-01-12 9:02 ` [PATCH v11 5/5] media: qcom: camss: vfe: Add support for VFE gen4 Hangxiang Ma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®