From: Robin Murphy <robin.murphy@arm.com>
To: Brent DeGraaf <bdegraaf@codeaurora.org>,
catalin.marinas@arm.com, will.deacon@arm.com
Cc: mark.rutland@arm.com, jungseoklee85@gmail.com,
andre.przywara@arm.com, timur@codeaurora.org,
linux-kernel@vger.kernel.org, james.morse@arm.com,
apinski@cavium.com, labbott@redhat.com,
linux-arm-kernel@lists.infradead.org, cov@codeaurora.org
Subject: Re: [RFC] arm64: Ensure proper addressing for ldnp/stnp
Date: Mon, 19 Sep 2016 19:01:13 +0100 [thread overview]
Message-ID: <be5f5bfd-fd41-d202-cec9-0ca3fcad28db@arm.com> (raw)
In-Reply-To: <1474306586-25118-1-git-send-email-bdegraaf@codeaurora.org>
On 19/09/16 18:36, Brent DeGraaf wrote:
> According to section 6.3.8 of the ARM Programmer's Guide, non-temporal
> loads and stores do not verify that address dependency is met between a
> load of an address to a register and a subsequent non-temporal load or
> store using that address on the executing PE. Therefore, context switch
> code and subroutine calls that use non-temporally accessed addresses as
> parameters that might depend on a load of an address into an argument
> register must ensure that ordering requirements are met by introducing
> a barrier prior to the successive non-temporal access. Add appropriate
> barriers whereever this specific situation comes into play.
>
> Signed-off-by: Brent DeGraaf <bdegraaf@codeaurora.org>
> ---
> arch/arm64/kernel/entry.S | 1 +
> arch/arm64/lib/copy_page.S | 2 ++
> 2 files changed, 3 insertions(+)
>
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 441420c..982c4d3 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -679,6 +679,7 @@ ENTRY(cpu_switch_to)
> ldp x27, x28, [x8], #16
> ldp x29, x9, [x8], #16
> ldr lr, [x8]
> + dmb nshld // Existence of instructions with loose load-use dependencies (e.g. ldnp/stnp) make this barrier necessary
> mov sp, x9
> and x9, x9, #~(THREAD_SIZE - 1)
> msr sp_el0, x9
> diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
> index 4c1e700..21c6892 100644
> --- a/arch/arm64/lib/copy_page.S
> +++ b/arch/arm64/lib/copy_page.S
> @@ -47,6 +47,8 @@ alternative_endif
> ldp x14, x15, [x1, #96]
> ldp x16, x17, [x1, #112]
>
> + dmb nshld // In case x0 (for stnp) is dependent on a load
The ARMv8 ARM (B2.7.2 in issue j) says that when an address dependency
exists between a load and a subsequent LDNP, *other* observers may
observe those accesses in any order. How's that related to an STNP on
the same CPU?
Robin.
> +
> mov x18, #(PAGE_SIZE - 128)
> add x1, x1, #128
> 1:
>
next prev parent reply other threads:[~2016-09-19 18:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-19 17:36 Brent DeGraaf
2016-09-19 18:01 ` Robin Murphy [this message]
2016-09-19 18:25 ` bdegraaf
2016-09-20 11:00 ` Robin Murphy
2016-09-20 13:02 ` bdegraaf
2016-09-19 18:28 ` Laura Abbott
2016-09-19 18:41 ` bdegraaf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=be5f5bfd-fd41-d202-cec9-0ca3fcad28db@arm.com \
--to=robin.murphy@arm.com \
--cc=andre.przywara@arm.com \
--cc=apinski@cavium.com \
--cc=bdegraaf@codeaurora.org \
--cc=catalin.marinas@arm.com \
--cc=cov@codeaurora.org \
--cc=james.morse@arm.com \
--cc=jungseoklee85@gmail.com \
--cc=labbott@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=timur@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome