Re: [PATCH] arm64: dts: qcom: hamoa-iot-evk: Enable display support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 7/23/25 8:14 AM, Yongxing Mou wrote:
> Enable DisplayPort support on all three USB-C ports of the
> hamoa-iot-evk platform.
> 
> Unlike most X1E-based boards, this platform uses FSUSB42 USB
> switches for the USB0 Type-C port, while USB1 and USB2 rely on
> Parade PS8830 retimers for Alt Mode switching.
> 
> Support for the PS8830 retimers was already included in the
> initial DTS, so this change adds support for the FSUSB42 switches.
> 
> Due to limitations in the USB/DP combo PHY driver, DisplayPort
> functionality is limited to 2 lanes instead of the maximum 4,
> consistent with other X1E-based platforms.
> 
> The platform also supports embedded DisplayPort (eDP) by default.
> 
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
> This change made top of initial DTS:
> https://lore.kernel.org/all/20250716-hamoa_initial-v1-0-f6f5d0f9a163@oss.qualcomm.com/
> ---

[...]

> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss_dp3_out: endpoint {

Please keep a \n between properties and subnodes

[...]

> base-commit: 0be23810e32e6d0a17df7c0ebad895ba2c210fc4
> change-id: 20250721-x1e-evk-dp-141e0df5593d
> prerequisite-message-id: <20250716-hamoa_initial-v1-0-f6f5d0f9a163@oss.qualcomm.com>
> prerequisite-patch-id: 3c553b55d143eafc1036ce2e88df558ec61c4e83
> prerequisite-patch-id: a4b2dabd376d32ecb159141c17113a8f3fc4ddfa
> prerequisite-patch-id: 24bf2ada12dc10f9980ed2c56347e5b6f7964ebd
> prerequisite-patch-id: c764e86c94055e56aaf9e701341bba52a54a998b

Having so many dependencies should raise your attention..

Konrad