Re: [PATCH v5 80/80] ARM: dts: bcm2711: Enable the display pipeline

[Hoegeun Kwon <hoegeun.kwon@samsung.com>]

Hi Maxime,

On 9/3/20 5:01 PM, Maxime Ripard wrote:
> Now that all the drivers have been adjusted for it, let's bring in the
> necessary device tree changes.
>
> The VEC and PV3 are left out for now, since it will require a more specific
> clock setup.
>
> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Thanks for your v5 patch


Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>


Best regards,

Hoegeun

> ---
>   arch/arm/boot/dts/bcm2711-rpi-4-b.dts |  48 +++++++++++-
>   arch/arm/boot/dts/bcm2711.dtsi        | 122 ++++++++++++++++++++++++++-
>   2 files changed, 169 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index e94244a215af..09a1182c2936 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -70,6 +70,14 @@
>   	};
>   };
>   
> +&ddc0 {
> +	status = "okay";
> +};
> +
> +&ddc1 {
> +	status = "okay";
> +};
> +
>   &firmware {
>   	firmware_clocks: clocks {
>   		compatible = "raspberrypi,firmware-clocks";
> @@ -170,6 +178,38 @@
>   			  "RGMII_TXD3";
>   };
>   
> +&hdmi0 {
> +	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
> +	clock-names = "hdmi", "bvb", "audio", "cec";
> +	status = "okay";
> +};
> +
> +&hdmi1 {
> +	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
> +	clock-names = "hdmi", "bvb", "audio", "cec";
> +	status = "okay";
> +};
> +
> +&hvs {
> +	clocks = <&firmware_clocks 4>;
> +};
> +
> +&pixelvalve0 {
> +	status = "okay";
> +};
> +
> +&pixelvalve1 {
> +	status = "okay";
> +};
> +
> +&pixelvalve2 {
> +	status = "okay";
> +};
> +
> +&pixelvalve4 {
> +	status = "okay";
> +};
> +
>   &pwm1 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
> @@ -253,3 +293,11 @@
>   &vchiq {
>   	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>   };
> +
> +&vc4 {
> +	status = "okay";
> +};
> +
> +&vec {
> +	status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 00bcaed1be32..4847dd305317 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -12,6 +12,18 @@
>   
>   	interrupt-parent = <&gicv2>;
>   
> +	vc4: gpu {
> +		compatible = "brcm,bcm2711-vc5";
> +		status = "disabled";
> +	};
> +
> +	clk_27MHz: clk-27M {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <27000000>;
> +		clock-output-names = "27MHz-clock";
> +	};
> +
>   	clk_108MHz: clk-108M {
>   		#clock-cells = <0>;
>   		compatible = "fixed-clock";
> @@ -238,6 +250,27 @@
>   			status = "disabled";
>   		};
>   
> +		pixelvalve0: pixelvalve@7e206000 {
> +			compatible = "brcm,bcm2711-pixelvalve0";
> +			reg = <0x7e206000 0x100>;
> +			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		pixelvalve1: pixelvalve@7e207000 {
> +			compatible = "brcm,bcm2711-pixelvalve1";
> +			reg = <0x7e207000 0x100>;
> +			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		pixelvalve2: pixelvalve@7e20a000 {
> +			compatible = "brcm,bcm2711-pixelvalve2";
> +			reg = <0x7e20a000 0x100>;
> +			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
>   		pwm1: pwm@7e20c800 {
>   			compatible = "brcm,bcm2835-pwm";
>   			reg = <0x7e20c800 0x28>;
> @@ -248,10 +281,25 @@
>   			status = "disabled";
>   		};
>   
> -		hvs@7e400000 {
> +		pixelvalve4: pixelvalve@7e216000 {
> +			compatible = "brcm,bcm2711-pixelvalve4";
> +			reg = <0x7e216000 0x100>;
> +			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		hvs: hvs@7e400000 {
> +			compatible = "brcm,bcm2711-hvs";
>   			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>   		};
>   
> +		pixelvalve3: pixelvalve@7ec12000 {
> +			compatible = "brcm,bcm2711-pixelvalve3";
> +			reg = <0x7ec12000 0x100>;
> +			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
>   		dvp: clock@7ef00000 {
>   			compatible = "brcm,brcm2711-dvp";
>   			reg = <0x7ef00000 0x10>;
> @@ -259,6 +307,78 @@
>   			#clock-cells = <1>;
>   			#reset-cells = <1>;
>   		};
> +
> +		hdmi0: hdmi@7ef00700 {
> +			compatible = "brcm,bcm2711-hdmi0";
> +			reg = <0x7ef00700 0x300>,
> +			      <0x7ef00300 0x200>,
> +			      <0x7ef00f00 0x80>,
> +			      <0x7ef00f80 0x80>,
> +			      <0x7ef01b00 0x200>,
> +			      <0x7ef01f00 0x400>,
> +			      <0x7ef00200 0x80>,
> +			      <0x7ef04300 0x100>,
> +			      <0x7ef20000 0x100>;
> +			reg-names = "hdmi",
> +				    "dvp",
> +				    "phy",
> +				    "rm",
> +				    "packet",
> +				    "metadata",
> +				    "csc",
> +				    "cec",
> +				    "hd";
> +			clock-names = "hdmi", "bvb", "audio", "cec";
> +			resets = <&dvp 0>;
> +			ddc = <&ddc0>;
> +			dmas = <&dma 10>;
> +			dma-names = "audio-rx";
> +			status = "disabled";
> +		};
> +
> +		ddc0: i2c@7ef04500 {
> +			compatible = "brcm,bcm2711-hdmi-i2c";
> +			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
> +			reg-names = "bsc", "auto-i2c";
> +			clock-frequency = <97500>;
> +			status = "disabled";
> +		};
> +
> +		hdmi1: hdmi@7ef05700 {
> +			compatible = "brcm,bcm2711-hdmi1";
> +			reg = <0x7ef05700 0x300>,
> +			      <0x7ef05300 0x200>,
> +			      <0x7ef05f00 0x80>,
> +			      <0x7ef05f80 0x80>,
> +			      <0x7ef06b00 0x200>,
> +			      <0x7ef06f00 0x400>,
> +			      <0x7ef00280 0x80>,
> +			      <0x7ef09300 0x100>,
> +			      <0x7ef20000 0x100>;
> +			reg-names = "hdmi",
> +				    "dvp",
> +				    "phy",
> +				    "rm",
> +				    "packet",
> +				    "metadata",
> +				    "csc",
> +				    "cec",
> +				    "hd";
> +			ddc = <&ddc1>;
> +			clock-names = "hdmi", "bvb", "audio", "cec";
> +			resets = <&dvp 1>;
> +			dmas = <&dma 17>;
> +			dma-names = "audio-rx";
> +			status = "disabled";
> +		};
> +
> +		ddc1: i2c@7ef09500 {
> +			compatible = "brcm,bcm2711-hdmi-i2c";
> +			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
> +			reg-names = "bsc", "auto-i2c";
> +			clock-frequency = <97500>;
> +			status = "disabled";
> +		};
>   	};
>   
>   	/*