From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
linux-rpi-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Maxime Ripard <maxime@cerno.tech>,
Chanwoo Choi <cw00.choi@samsung.com>,
Hoegeun Kwon <hoegeun.kwon@samsung.com>,
Stefan Wahren <stefan.wahren@i2se.com>
Subject: [PATCH v5 39/80] drm/vc4: hdmi: Move structure to header
Date: Thu, 3 Sep 2020 10:01:11 +0200 [thread overview]
Message-ID: <db3ff2babc914e38e86f794c4e49128697aed887.1599120059.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.dddc064d8bb83e46744336af67dcb13139e5747d.1599120059.git-series.maxime@cerno.tech>
We will need to share the vc4_hdmi and related structures with multiple
files, so let's create a header for it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 76 +-------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 86 +++++++++++++++++++++++++++++++++++-
2 files changed, 87 insertions(+), 75 deletions(-)
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ae8c4d53e239..5c4d2fee6b86 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -49,87 +49,13 @@
#include <sound/soc.h>
#include "media/cec.h"
#include "vc4_drv.h"
+#include "vc4_hdmi.h"
#include "vc4_regs.h"
#define HSM_CLOCK_FREQ 163682864
#define CEC_CLOCK_FREQ 40000
#define CEC_CLOCK_DIV (HSM_CLOCK_FREQ / CEC_CLOCK_FREQ)
-/* HDMI audio information */
-struct vc4_hdmi_audio {
- struct snd_soc_card card;
- struct snd_soc_dai_link link;
- struct snd_soc_dai_link_component cpu;
- struct snd_soc_dai_link_component codec;
- struct snd_soc_dai_link_component platform;
- int samplerate;
- int channels;
- struct snd_dmaengine_dai_dma_data dma_data;
- struct snd_pcm_substream *substream;
-};
-
-/* General HDMI hardware state. */
-struct vc4_hdmi {
- struct platform_device *pdev;
-
- struct drm_encoder *encoder;
- struct drm_connector *connector;
-
- struct vc4_hdmi_audio audio;
-
- struct i2c_adapter *ddc;
- void __iomem *hdmicore_regs;
- void __iomem *hd_regs;
- int hpd_gpio;
- bool hpd_active_low;
-
- struct cec_adapter *cec_adap;
- struct cec_msg cec_rx_msg;
- bool cec_tx_ok;
- bool cec_irq_was_rx;
-
- struct clk *pixel_clock;
- struct clk *hsm_clock;
-
- struct debugfs_regset32 hdmi_regset;
- struct debugfs_regset32 hd_regset;
-};
-
-#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
-#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
-#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
-#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
-
-/* VC4 HDMI encoder KMS struct */
-struct vc4_hdmi_encoder {
- struct vc4_encoder base;
- bool hdmi_monitor;
- bool limited_rgb_range;
-};
-
-static inline struct vc4_hdmi_encoder *
-to_vc4_hdmi_encoder(struct drm_encoder *encoder)
-{
- return container_of(encoder, struct vc4_hdmi_encoder, base.base);
-}
-
-/* VC4 HDMI connector KMS struct */
-struct vc4_hdmi_connector {
- struct drm_connector base;
-
- /* Since the connector is attached to just the one encoder,
- * this is the reference to it so we can do the best_encoder()
- * hook.
- */
- struct drm_encoder *encoder;
-};
-
-static inline struct vc4_hdmi_connector *
-to_vc4_hdmi_connector(struct drm_connector *connector)
-{
- return container_of(connector, struct vc4_hdmi_connector, base);
-}
-
static const struct debugfs_reg32 hdmi_regs[] = {
VC4_REG32(VC4_HDMI_CORE_REV),
VC4_REG32(VC4_HDMI_SW_RESET_CONTROL),
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
new file mode 100644
index 000000000000..5ec5d1f6b1e6
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -0,0 +1,86 @@
+#ifndef _VC4_HDMI_H_
+#define _VC4_HDMI_H_
+
+#include <drm/drm_connector.h>
+#include <media/cec.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/soc.h>
+
+#include "vc4_drv.h"
+
+/* HDMI audio information */
+struct vc4_hdmi_audio {
+ struct snd_soc_card card;
+ struct snd_soc_dai_link link;
+ struct snd_soc_dai_link_component cpu;
+ struct snd_soc_dai_link_component codec;
+ struct snd_soc_dai_link_component platform;
+ int samplerate;
+ int channels;
+ struct snd_dmaengine_dai_dma_data dma_data;
+ struct snd_pcm_substream *substream;
+};
+
+/* General HDMI hardware state. */
+struct vc4_hdmi {
+ struct platform_device *pdev;
+
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ struct vc4_hdmi_audio audio;
+
+ struct i2c_adapter *ddc;
+ void __iomem *hdmicore_regs;
+ void __iomem *hd_regs;
+ int hpd_gpio;
+ bool hpd_active_low;
+
+ struct cec_adapter *cec_adap;
+ struct cec_msg cec_rx_msg;
+ bool cec_tx_ok;
+ bool cec_irq_was_rx;
+
+ struct clk *pixel_clock;
+ struct clk *hsm_clock;
+
+ struct debugfs_regset32 hdmi_regset;
+ struct debugfs_regset32 hd_regset;
+};
+
+#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
+#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
+#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
+#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
+
+/* VC4 HDMI encoder KMS struct */
+struct vc4_hdmi_encoder {
+ struct vc4_encoder base;
+ bool hdmi_monitor;
+ bool limited_rgb_range;
+};
+
+static inline struct vc4_hdmi_encoder *
+to_vc4_hdmi_encoder(struct drm_encoder *encoder)
+{
+ return container_of(encoder, struct vc4_hdmi_encoder, base.base);
+}
+
+/* VC4 HDMI connector KMS struct */
+struct vc4_hdmi_connector {
+ struct drm_connector base;
+
+ /* Since the connector is attached to just the one encoder,
+ * this is the reference to it so we can do the best_encoder()
+ * hook.
+ */
+ struct drm_encoder *encoder;
+};
+
+static inline struct vc4_hdmi_connector *
+to_vc4_hdmi_connector(struct drm_connector *connector)
+{
+ return container_of(connector, struct vc4_hdmi_connector, base);
+}
+
+#endif /* _VC4_HDMI_H_ */
--
git-series 0.9.1
next prev parent reply other threads:[~2020-09-03 8:05 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200904071259epcas1p3de4209531c0bc5ed6ea9ef19827b6ed5@epcas1p3.samsung.com>
2020-09-03 8:00 ` [PATCH v5 00/80] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 01/80] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 02/80] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 03/80] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 04/80] drm/vc4: plane: Change LBM alignment constraint on LBM Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 05/80] drm/vc4: plane: Optimize the LBM allocation size Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 06/80] drm/vc4: plane: Create more planes Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 07/80] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 08/80] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 09/80] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 10/80] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 11/80] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 12/80] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 13/80] drm/vc4: kms: Convert to for_each_new_crtc_state Maxime Ripard
2020-09-04 15:42 ` Dave Stevenson
2020-09-03 8:00 ` [PATCH v5 14/80] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 15/80] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 16/80] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 17/80] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 18/80] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 19/80] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 20/80] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 21/80] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 22/80] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 23/80] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 24/80] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 25/80] drm/vc4: crtc: Remove mode_set_nofb Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 26/80] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-09-03 8:00 ` [PATCH v5 27/80] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 28/80] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 29/80] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 30/80] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 31/80] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 32/80] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 33/80] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 34/80] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 35/80] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 36/80] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 37/80] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 38/80] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-09-03 8:01 ` Maxime Ripard [this message]
2020-09-03 8:01 ` [PATCH v5 40/80] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 41/80] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 42/80] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 43/80] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 44/80] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 45/80] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 46/80] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 47/80] drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our device Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 48/80] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 49/80] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 50/80] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 51/80] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 52/80] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 53/80] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 54/80] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 55/80] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-09-04 15:45 ` Dave Stevenson
2020-09-03 8:01 ` [PATCH v5 56/80] drm/vc4: hdmi: Add a set_timings callback Maxime Ripard
2020-09-04 15:46 ` Dave Stevenson
2020-09-03 8:01 ` [PATCH v5 57/80] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 58/80] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 59/80] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 60/80] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 61/80] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 62/80] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 63/80] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 64/80] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 65/80] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 66/80] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 67/80] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 68/80] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 69/80] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 70/80] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 71/80] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 72/80] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 73/80] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 74/80] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 75/80] drm/vc4: hdmi: Add pixel BVB clock control Maxime Ripard
2020-09-04 9:46 ` Dave Stevenson
2020-09-07 16:21 ` Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 76/80] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 77/80] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-09-07 11:54 ` Hoegeun Kwon
2020-09-03 8:01 ` [PATCH v5 78/80] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-09-03 8:01 ` [PATCH v5 79/80] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-09-04 15:51 ` Dave Stevenson
2020-09-03 8:01 ` [PATCH v5 80/80] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-09-07 12:03 ` Hoegeun Kwon
2020-09-08 16:31 ` Nicolas Saenz Julienne
2020-09-29 22:15 ` Nathan Chancellor
2020-09-30 14:07 ` Maxime Ripard
2020-09-30 16:38 ` Nathan Chancellor
2020-09-30 16:52 ` Stefan Wahren
2020-10-01 6:48 ` Maxime Ripard
2020-10-01 8:54 ` Maxime Ripard
2020-10-01 10:15 ` Tim Gover
2020-10-01 16:47 ` Nicolas Saenz Julienne
2020-10-01 19:45 ` Tim Gover
2020-10-02 15:19 ` Maxime Ripard
2020-10-02 15:57 ` Dave Stevenson
2020-10-06 15:26 ` Maxime Ripard
2020-10-06 17:14 ` Dave Stevenson
2020-10-08 9:35 ` Nicolas Saenz Julienne
2020-10-01 9:22 ` Nicolas Saenz Julienne
2020-10-01 9:33 ` Maxime Ripard
2020-10-01 18:09 ` Nathan Chancellor
2020-09-07 11:49 ` [PATCH v5 00/80] drm/vc4: Support BCM2711 Display Pipeline Hoegeun Kwon
2020-09-08 12:00 ` Maxime Ripard
2020-09-14 10:14 ` Hoegeun Kwon
2020-09-16 16:57 ` Maxime Ripard
2020-10-08 11:27 ` Maxime Ripard
2020-09-07 16:22 ` Maxime Ripard
2020-09-07 18:21 ` Nicolas Saenz Julienne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db3ff2babc914e38e86f794c4e49128697aed887.1599120059.git-series.maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=cw00.choi@samsung.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=hoegeun.kwon@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=stefan.wahren@i2se.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®