From: Julien Panis <jpanis@baylibre.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
lee@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, corbet@lwn.net, arnd@arndb.de,
gregkh@linuxfoundation.org, derek.kiernan@xilinx.com,
dragan.cvetic@xilinx.com
Cc: eric.auger@redhat.com, jgg@ziepe.ca, razor@blackwall.org,
stephen@networkplumber.org, davem@davemloft.net,
christian.koenig@amd.com, contact@emersion.fr,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org, sterzik@ti.com, u-kumar1@ti.com,
eblanc@baylibre.com, jneanne@baylibre.com
Subject: Re: [PATCH v3 1/4] dt-bindings: mfd: Add TI TPS6594 PMIC
Date: Wed, 22 Mar 2023 09:01:35 +0100 [thread overview]
Message-ID: <bffba580-e737-8996-4812-3c76c880acc9@baylibre.com> (raw)
In-Reply-To: <88a6856e-c766-d4a5-1882-5350fd0e248a@linaro.org>
On 3/22/23 08:34, Krzysztof Kozlowski wrote:
> On 21/03/2023 18:10, Julien Panis wrote:
>> TPS6594 is a Power Management IC which provides regulators and others
>> features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
>> PFSM (Pre-configurable Finite State Machine) managing the state of the
>> device.
>> TPS6594 is the super-set device while TPS6593 and LP8764X are derivatives.
>>
>> Signed-off-by: Julien Panis <jpanis@baylibre.com>
>> ---
>> .../devicetree/bindings/mfd/ti,tps6594.yaml | 231 ++++++++++++++++++
>> 1 file changed, 231 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
>> new file mode 100644
>> index 000000000000..4e4565a68e40
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
>> @@ -0,0 +1,231 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: TI TPS6594 Power Management Integrated Circuit
>> +
>> +maintainers:
>> + - Julien Panis <jpanis@baylibre.com>
>> +
>> +description:
>> + TPS6594 is a Power Management IC which provides regulators and others
>> + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
>> + PFSM (Pre-configurable Finite State Machine) managing the state of the device.
>> + TPS6594 is the super-set device while TPS6593 and LP8764X are derivatives.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ti,lp8764x
> Does x stand for a wildcard? If so, then fix it. Compatibles should be
> specific.
OK, I will remove 'x' in next version.
>
>> + - ti,tps6593
>> + - ti,tps6594
>> +
>> + reg:
>> + description: I2C slave address or SPI chip select number.
>> + maxItems: 1
>> +
>> + ti,primary-pmic:
>> + type: boolean
>> + description: |
>> + Identify the primary PMIC on SPMI bus.
>> + A multi-PMIC synchronization scheme is implemented in the PMIC device
>> + to synchronize the power state changes with other PMIC devices. This is
>> + accomplished through a SPMI bus: the primary PMIC is the controller
>> + device on the SPMI bus, and the secondary PMICs are the target devices
>> + on the SPMI bus.
>> +
>> + system-power-controller: true
>> +
>> + gpio-controller: true
>> +
>> + '#gpio-cells':
>> + const: 2
>> + description: |
>> + The first cell is the pin number, the second cell is used to specify flags.
>> + See ../gpio/gpio.txt for more information.
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + ti,multi-phase-id:
>> + description: |
>> + Describes buck multi-phase configuration, if any. For instance, XY id means
>> + that outputs of buck converters X and Y are combined in multi-phase mode.
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
> No improvements here. As Rob pointed out, this looks like coupled
> regulators.
I used 'oneOf' logic to handle mutual exclusion. But it seems that I did not
understand what you and Rob expected.
Does some generic property already exist for 'coupled regulators' ?
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2023-03-22 8:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-21 17:10 [PATCH v3 0/4] TI TPS6594 PMIC support (Core, ESM, PFSM) Julien Panis
2023-03-21 17:10 ` [PATCH v3 1/4] dt-bindings: mfd: Add TI TPS6594 PMIC Julien Panis
2023-03-22 7:34 ` Krzysztof Kozlowski
2023-03-22 8:01 ` Julien Panis [this message]
2023-03-22 8:16 ` Krzysztof Kozlowski
2023-03-22 13:55 ` Julien Panis
2023-03-22 21:36 ` Krzysztof Kozlowski
2023-03-21 17:10 ` [PATCH v3 2/4] mfd: tps6594: Add driver for " Julien Panis
2023-03-27 15:35 ` Julien Panis
2023-03-29 14:49 ` Lee Jones
2023-03-21 17:10 ` [PATCH v3 3/4] misc: tps6594-esm: Add driver for TI TPS6594 ESM Julien Panis
2023-03-21 17:10 ` [PATCH v3 4/4] misc: tps6594-pfsm: Add driver for TI TPS6594 PFSM Julien Panis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bffba580-e737-8996-4812-3c76c880acc9@baylibre.com \
--to=jpanis@baylibre.com \
--cc=arnd@arndb.de \
--cc=christian.koenig@amd.com \
--cc=contact@emersion.fr \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=derek.kiernan@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=dragan.cvetic@xilinx.com \
--cc=eblanc@baylibre.com \
--cc=eric.auger@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=jgg@ziepe.ca \
--cc=jneanne@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lee@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=razor@blackwall.org \
--cc=robh+dt@kernel.org \
--cc=stephen@networkplumber.org \
--cc=sterzik@ti.com \
--cc=u-kumar1@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®