Re: [PATCH 3/5] drm/rockchip: dw_hdmi_qp: Provide ref clock rate in dw_hdmi_qp_plat_data

[Cristian Ciocaltea <cristian.ciocaltea@collabora.com>]

Hi Maxime,

On 7/4/25 6:07 PM, Maxime Ripard wrote:
> On Fri, Jul 04, 2025 at 05:23:24PM +0300, Cristian Ciocaltea wrote:
>> In order to support correct initialization of the timer base in the HDMI
>> QP IP block, extend the platform data to provide the necessary reference
>> clock rate.
>>
>> While at it, ensure plat_data is zero-initialized in
>> dw_hdmi_qp_rockchip_bind().
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>  drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c | 13 ++++++++++++-
>>  include/drm/bridge/dw_hdmi_qp.h                |  1 +
>>  2 files changed, 13 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
>> index 126e556025961e8645f3567b4d7a1c73cc2f2e7f..8c1185490009c5f1bc658998a868f8b18dc479a3 100644
>> --- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
>> +++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
>> @@ -431,8 +431,8 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
>>  				    void *data)
>>  {
>>  	struct platform_device *pdev = to_platform_device(dev);
>> +	struct dw_hdmi_qp_plat_data plat_data = {};
>>  	const struct rockchip_hdmi_qp_cfg *cfg;
>> -	struct dw_hdmi_qp_plat_data plat_data;
>>  	struct drm_device *drm = data;
>>  	struct drm_connector *connector;
>>  	struct drm_encoder *encoder;
>> @@ -515,6 +515,17 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
>>  		return ret;
>>  	}
>>  
>> +	for (i = 0; i < ret; i++) {
>> +		if (!strcmp(clks[i].id, "ref")) {
>> +			plat_data.ref_clk_rate = clk_get_rate(clks[i].clk);
>> +			break;
>> +		}
>> +	}
>> +	if (!plat_data.ref_clk_rate) {
>> +		dev_err(hdmi->dev, "Missing ref clock\n");
>> +		return -EINVAL;
>> +	}
>> +
> 
> You'd be better off not using clk_bulk, or calling an additional clk_get
> for the ref clock only.

I'd keep clk_bulk as there are 5 more clocks in the list.  But replacing the
loop with just an extra clk_get would be a simpler approach, indeed, so
thanks for the hint!

Regards,
Cristian