mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Lechner <david@lechnology.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>,
	Greg KH <gregkh@linuxfoundation.org>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] counter: drop chrdev_lock
Date: Tue, 19 Oct 2021 09:44:04 -0500	[thread overview]
Message-ID: <c0a4cd67-6046-b06d-c33c-c0f3374d0b52@lechnology.com> (raw)
In-Reply-To: <YW5xUtWdvW5zHFx5@shinobu>

On 10/19/21 2:18 AM, William Breathitt Gray wrote:
> On Tue, Oct 19, 2021 at 09:07:48AM +0200, Greg KH wrote:
>> On Tue, Oct 19, 2021 at 03:53:08PM +0900, William Breathitt Gray wrote:
>>> On Mon, Oct 18, 2021 at 11:03:49AM -0500, David Lechner wrote:
>>>> On 10/18/21 4:14 AM, William Breathitt Gray wrote:
>>>>> On Sun, Oct 17, 2021 at 01:55:21PM -0500, David Lechner wrote:
>>>>>> diff --git a/drivers/counter/counter-sysfs.c b/drivers/counter/counter-sysfs.c
>>>>>> index 1ccd771da25f..7bf8882ff54d 100644
>>>>>> --- a/drivers/counter/counter-sysfs.c
>>>>>> +++ b/drivers/counter/counter-sysfs.c
>>>>>> @@ -796,25 +796,18 @@ static int counter_events_queue_size_write(struct counter_device *counter,
>>>>>>    					   u64 val)
>>>>>>    {
>>>>>>    	DECLARE_KFIFO_PTR(events, struct counter_event);
>>>>>> -	int err = 0;
>>>>>> -
>>>>>> -	/* Ensure chrdev is not opened more than 1 at a time */
>>>>>> -	if (!atomic_add_unless(&counter->chrdev_lock, 1, 1))
>>>>>> -		return -EBUSY;
>>>>>> +	int err;
>>>>>>    
>>>>>>    	/* Allocate new events queue */
>>>>>>    	err = kfifo_alloc(&events, val, GFP_KERNEL);
>>>>>>    	if (err)
>>>>>> -		goto exit_early;
>>>>>> +		return err;
>>>>>>    
>>>>>>    	/* Swap in new events queue */
>>>>>>    	kfifo_free(&counter->events);
>>>>>>    	counter->events.kfifo = events.kfifo;
>>>>>
>>>>> Do we need to hold the events_lock mutex here for this swap in case
>>>>> counter_chrdev_read() is in the middle of reading the kfifo to
>>>>> userspace, or do the kfifo macros already protect us from a race
>>>>> condition here?
>>>>>
>>>> Another possibility might be to disallow changing the size while
>>>> events are enabled. Otherwise, we also need to protect against
>>>> write after free.
>>>>
>>>> I considered this:
>>>>
>>>> 	swap(counter->events.kfifo, events.kfifo);
>>>> 	kfifo_free(&events);
>>>>
>>>> But I'm not sure that would be safe enough.
>>>
>>> I think it depends on whether it's safe to call kfifo_free() while other
>>> kfifo_*() calls are executing. I suspect it is not safe because I don't
>>> think kfifo_free() waits until all kfifo read/write operations are
>>> finished before freeing -- but if I'm wrong here please let me know.
>>>
>>> Because of that, will need to hold the counter->events_lock afterall so
>>> that we don't modify the events fifo while a kfifo read/write is going
>>> on, lest we suffer an address fault. This can happen regardless of
>>> whether you swap before or after the kfifo_free() because the old fifo
>>> address could still be in use within those uncompleted kfifo_*() calls
>>> if they were called before the swap but don't complete before the
>>> kfifo_free().
>>>
>>> So we have a problem now that I think you have already noticed: the
>>> kfifo_in() call in counter_push_events() also needs protection, but it's
>>> executing within an interrupt context so we can't try to lock a mutex
>>> lest we end up sleeping.
>>>
>>> One option we have is as you suggested: we disallow changing size while
>>> events are enabled. However, that will require us to keep track of when
>>> events are disabled and implement a spinlock to ensure that we don't
>>> disable events in the middle of a kfifo_in().
>>>
>>> Alternatively, we could change events_lock to a spinlock and use it to
>>> protect all these operations on the counter->events fifo. Would this
>>> alternative be a better option so that we avoid creating another
>>> separate lock?
>>
>> I would recommend just having a single lock here if at all possible,
>> until you determine that there a performance problem that can be
>> measured that would require it to be split up.
>>
>> thanks,
>>
>> greg k-h
> 
> All right let's go with a single events_lock spinlock then. David, if
> you make those changes and submit a v2, I'll be okay with this patch and
> can provide my ack for it.
> 

We can't use a spin lock for everything since there are operations
that can sleep that need to be in the critical sections. Likewise,
we can't use a mutex for everything since some critical sections
are in interrupt handlers. But, I suppose we can try combining
the existing mutexes. Since the kfifo is accessed from both
contexts, it seems like it still needs more consideration than
just a mutex or a spin lock, e.g. if events are enabled, don't
allow swapping out the kfifo buffer.


  parent reply	other threads:[~2021-10-19 14:44 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-17 18:55 David Lechner
2021-10-18  6:08 ` Greg KH
2021-10-18  8:58   ` William Breathitt Gray
2021-10-18  9:13     ` Greg KH
2021-10-18  9:51       ` William Breathitt Gray
2021-10-18 16:14         ` David Lechner
2021-10-18 23:56           ` William Breathitt Gray
2021-10-18  9:14 ` William Breathitt Gray
2021-10-18 16:03   ` David Lechner
2021-10-19  6:53     ` William Breathitt Gray
2021-10-19  7:07       ` Greg KH
2021-10-19  7:18         ` William Breathitt Gray
2021-10-19  7:29           ` Greg KH
2021-10-19  7:46             ` William Breathitt Gray
2021-10-19  9:36               ` Greg KH
2021-10-19 14:44           ` David Lechner [this message]
2021-10-19 20:59             ` William Breathitt Gray
2021-10-20  5:42               ` William Breathitt Gray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c0a4cd67-6046-b06d-c33c-c0f3374d0b52@lechnology.com \
    --to=david@lechnology.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®