From: Guenter Roeck <linux@roeck-us.net>
To: Holger Kiehl <Holger.Kiehl@dwd.de>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
"Clemens Ladisch" <clemens@ladisch.de>,
"Jean Delvare" <jdelvare@suse.com>,
"Darren Salt" <devspam@moreofthesa.me.uk>,
"Bernhard Gebetsberger" <bernhard.gebetsberger@gmx.at>,
"Ken Moffat" <zarniwhoop73@googlemail.com>,
"Ondrej Čerman" <ocerman@sda1.eu>,
"Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Brad Campbell" <lists2009@fnarfbargle.com>
Subject: Re: [PATCH v2 0/5] hwmon: k10temp driver improvements
Date: Sun, 19 Jan 2020 07:49:31 -0800 [thread overview]
Message-ID: <c0dc8e86-0063-b1ef-fb05-b4b62dd278ef@roeck-us.net> (raw)
In-Reply-To: <alpine.LRH.2.21.2001191054490.328@diagnostix.dwd.de>
On 1/19/20 5:38 AM, Holger Kiehl wrote:
> On Sat, 18 Jan 2020, Guenter Roeck wrote:
>
>> This patch series implements various improvements for the k10temp driver.
>>
>> Patch 1/5 introduces the use of bit operations.
>>
>> Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info
>> API. This not only simplifies the code and reduces its size, it also
>> makes the code easier to maintain and enhance.
>>
>> Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures
>> on Ryzen 3 (Zen2) CPUs.
>>
>> Patch 4/5 adds support for reporting core and SoC current and voltage
>> information on Ryzen CPUs.
>>
>> Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs.
>> It is inaccurate, misleading, and it just doesn't make sense to report
>> wrong information.
>>
>> With all patches in place, output on Ryzen 3900X CPUs looks as follows
>> (with the system under load).
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> Vcore: +1.36 V
>> Vsoc: +1.18 V
>> Tdie: +86.8°C
>> Tctl: +86.8°C
>> Tccd1: +80.0°C
>> Tccd2: +81.8°C
>> Icore: +44.14 A
>> Isoc: +13.83 A
>>
>> The voltage and current information is limited to Ryzen CPUs. Voltage
>> and current reporting on Threadripper and EPYC CPUs is different, and the
>> reported information is either incomplete or wrong. Exclude it for the time
>> being; it can always be added if/when more information becomes available.
>>
>> Tested with the following Ryzen CPUs:
>> 1300X A user with this CPU in the system reported somewhat unexpected
>> values for Vcore; it isn't entirely if at all clear why that is
>> the case. Overall this does not warrant holding up the series.
>> 1600
>> 1800X
>> 2200G
>> 2400G
>> 3800X
>> 3900X
>> 3950X
>>
>> v2: Added tested-by: tags as received.
>> Don't display voltage and current information for Threadripper and EPYC.
>> Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C
>> for Tdie on model 17h/18h CPUs.
>>
> Just tested this on a 2400G. Here idle values:
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> Vcore: +0.77 V
> Vsoc: +1.11 V
> Tdie: +45.0°C
> Tctl: +45.0°C
> Icore: +10.39 A
> Isoc: +2.89 A
>
> nvme-pci-0100
> Adapter: PCI adapter
> Composite: +43.9°C (low = -273.1°C, high = +80.8°C)
> (crit = +80.8°C)
> Sensor 1: +43.9°C (low = -273.1°C, high = +65261.8°C)
> Sensor 2: +48.9°C (low = -273.1°C, high = +65261.8°C)
>
> nct6793-isa-0290
> Adapter: ISA adapter
> in0: +0.35 V (min = +0.00 V, max = +1.74 V)
> in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
> in2: +3.41 V (min = +0.00 V, max = +0.00 V) ALARM
> in3: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
> in4: +0.26 V (min = +0.00 V, max = +0.00 V) ALARM
> in5: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
> in6: +0.66 V (min = +0.00 V, max = +0.00 V) ALARM
> in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
> in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
> in9: +1.83 V (min = +0.00 V, max = +0.00 V) ALARM
> in10: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
> in11: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
> in12: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM
> in13: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
> in14: +0.21 V (min = +0.00 V, max = +0.00 V) ALARM
> fan1: 0 RPM (min = 0 RPM)
> fan2: 323 RPM (min = 0 RPM)
> fan3: 0 RPM (min = 0 RPM)
> fan4: 0 RPM (min = 0 RPM)
> fan5: 0 RPM (min = 0 RPM)
> SYSTIN: +112.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
> CPUTIN: +60.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
> AUXTIN0: +46.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
> AUXTIN1: +106.0°C sensor = thermistor
> AUXTIN2: +105.0°C sensor = thermistor
> AUXTIN3: +102.0°C sensor = thermistor
> SMBUSMASTER 0: +45.0°C
> PCH_CHIP_CPU_MAX_TEMP: +0.0°C
> PCH_CHIP_TEMP: +0.0°C
> PCH_CPU_TEMP: +0.0°C
> intrusion0: OK
> intrusion1: ALARM
> beep_enable: disabled
>
> amdgpu-pci-0300
> Adapter: PCI adapter
> vddgfx: N/A
> vddnb: N/A
> edge: +45.0°C (crit = +80.0°C, hyst = +0.0°C)
>
> And here with some high load:
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> Vcore: +1.32 V
> Vsoc: +1.11 V
> Tdie: +77.1°C
> Tctl: +77.1°C
> Icore: +85.22 A
> Isoc: +3.61 A
>
> nvme-pci-0100
> Adapter: PCI adapter
> Composite: +42.9°C (low = -273.1°C, high = +80.8°C)
> (crit = +80.8°C)
> Sensor 1: +42.9°C (low = -273.1°C, high = +65261.8°C)
> Sensor 2: +45.9°C (low = -273.1°C, high = +65261.8°C)
>
> nct6793-isa-0290
> Adapter: ISA adapter
> in0: +0.68 V (min = +0.00 V, max = +1.74 V)
> in1: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM
> in2: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
> in3: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
> in4: +0.26 V (min = +0.00 V, max = +0.00 V) ALARM
> in5: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
> in6: +0.66 V (min = +0.00 V, max = +0.00 V) ALARM
> in7: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
> in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
> in9: +1.83 V (min = +0.00 V, max = +0.00 V) ALARM
> in10: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
> in11: +0.14 V (min = +0.00 V, max = +0.00 V) ALARM
> in12: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM
> in13: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
> in14: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
> fan1: 0 RPM (min = 0 RPM)
> fan2: 1931 RPM (min = 0 RPM)
> fan3: 0 RPM (min = 0 RPM)
> fan4: 0 RPM (min = 0 RPM)
> fan5: 0 RPM (min = 0 RPM)
> SYSTIN: +113.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
> CPUTIN: +64.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
> AUXTIN0: +45.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
> AUXTIN1: +107.0°C sensor = thermistor
> AUXTIN2: +105.0°C sensor = thermistor
> AUXTIN3: +102.0°C sensor = thermistor
> SMBUSMASTER 0: +77.0°C
> PCH_CHIP_CPU_MAX_TEMP: +0.0°C
> PCH_CHIP_TEMP: +0.0°C
> PCH_CPU_TEMP: +0.0°C
> intrusion0: OK
> intrusion1: ALARM
> beep_enable: disabled
>
> amdgpu-pci-0300
> Adapter: PCI adapter
> vddgfx: N/A
> vddnb: N/A
> edge: +77.0°C (crit = +80.0°C, hyst = +0.0°C)
>
> Have also tried this on a EPYC 7302. Before the patch:
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> Tdie: +28.1°C (high = +70.0°C)
> Tctl: +28.1°C
>
> and after:
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> Tdie: +28.2°C
> Tctl: +28.2°C
>
> No extra values shown, but I think this is expected.
>
Unfortunately yes, but it helps to confirm that the detection works.
> Tested-by Holger Kiehl <holger.kiehl@dwd.de>
>
Thanks again!
Guenter
next prev parent reply other threads:[~2020-01-19 15:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-18 17:26 Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 1/5] hwmon: (k10temp) Use bitops Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 2/5] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 3/5] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 4/5] hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 5/5] hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs Guenter Roeck
2020-01-19 0:33 ` [PATCH v2 0/5] hwmon: k10temp driver improvements Ken Moffat
2020-01-19 0:48 ` Guenter Roeck
2020-01-19 1:08 ` Ken Moffat
2020-01-19 3:13 ` Brad Campbell
2020-01-19 10:18 ` Jonathan McDowell
2020-01-19 15:46 ` Guenter Roeck
2020-01-19 19:38 ` Jonathan McDowell
2020-01-19 13:38 ` Holger Kiehl
2020-01-19 15:49 ` Guenter Roeck [this message]
2020-01-21 6:27 ` Andreas Hartmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c0dc8e86-0063-b1ef-fb05-b4b62dd278ef@roeck-us.net \
--to=linux@roeck-us.net \
--cc=Holger.Kiehl@dwd.de \
--cc=bernhard.gebetsberger@gmx.at \
--cc=clemens@ladisch.de \
--cc=devspam@moreofthesa.me.uk \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lists2009@fnarfbargle.com \
--cc=ocerman@sda1.eu \
--cc=sebastian.reichel@collabora.com \
--cc=zarniwhoop73@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®