From: Andreas Hartmann <andihartmann@01019freenet.de>
To: Kernel-Mailingliste <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 0/5] hwmon: k10temp driver improvements
Date: Tue, 21 Jan 2020 07:27:49 +0100 [thread overview]
Message-ID: <c5d5aafb-282e-9ed1-ff1e-be6105446d39@01019freenet.de> (raw)
In-Reply-To: <20200118172615.26329-1-linux@roeck-us.net>
On 18.01.20 at 18:26 Guenter Roeck wrote:
> This patch series implements various improvements for the k10temp driver.
Tested with Asus Prime X370-PRO / 1700X / Linux 5.4.x
Tested-By: Andreas Hartmann <andihartmann@01019freenet.de>
Idle:
it8665-isa-0290
Adapter: ISA adapter
in0: +0.88 V (min = +1.27 V, max = +2.00 V)
in1: +2.52 V (min = +2.76 V, max = +2.55 V)
in2: +2.05 V (min = +1.23 V, max = +0.16 V)
in3: +2.01 V (min = +1.53 V, max = +2.25 V)
in4: +0.03 V (min = +2.67 V, max = +2.43 V)
in5: +0.03 V (min = +2.39 V, max = +1.21 V)
in6: +0.03 V (min = +1.67 V, max = +0.56 V)
3VSB: +3.31 V (min = +2.46 V, max = +5.43 V)
Vbat: +3.25 V
+3.3V: +3.31 V
Fan CPU: 594 RPM (min = 10 RPM)
Fan back: 380 RPM (min = 11 RPM)
Fan front: 415 RPM (min = 12 RPM)
fan5: 0 RPM (min = -1 RPM) ALARM
fan6: 0 RPM (min = -1 RPM) ALARM
CPU: +28.0°C (low = +112.0°C, high = -5.0°C)
Motherboard: +30.0°C (low = -33.0°C, high = -18.0°C) sensor = thermistor
temp3: +29.0°C (low = -1.0°C, high = -105.0°C) sensor = thermistor
temp4: +29.0°C (low = -74.0°C, high = +126.0°C) sensor = thermistor
temp5: +29.0°C (low = -49.0°C, high = +127.0°C) sensor = thermistor
temp6: +29.0°C (low = -82.0°C, high = -79.0°C) sensor = thermistor
intrusion0: ALARM
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +0.90 V
Vsoc: +0.90 V
CPU: +28.6°C (high = +70.0°C)
Tctl: +48.6°C
Icore: +5.20 A
Isoc: +7.21 A
Load:
it8665-isa-0290
Adapter: ISA adapter
in0: +1.38 V (min = +1.27 V, max = +2.00 V)
in1: +2.52 V (min = +2.76 V, max = +2.55 V)
in2: +2.04 V (min = +1.23 V, max = +0.16 V)
in3: +2.01 V (min = +1.53 V, max = +2.25 V)
in4: +0.03 V (min = +2.67 V, max = +2.43 V)
in5: +0.03 V (min = +2.39 V, max = +1.21 V)
in6: +0.03 V (min = +1.67 V, max = +0.56 V)
3VSB: +3.33 V (min = +2.46 V, max = +5.43 V)
Vbat: +3.25 V
+3.3V: +3.33 V
Fan CPU: 798 RPM (min = 10 RPM)
Fan back: 481 RPM (min = 11 RPM)
Fan front: 460 RPM (min = 12 RPM)
fan5: 0 RPM (min = -1 RPM) ALARM
fan6: 0 RPM (min = -1 RPM) ALARM
CPU: +43.0°C (low = +112.0°C, high = -5.0°C)
Motherboard: +30.0°C (low = -33.0°C, high = -18.0°C) sensor = thermistor
temp3: +33.0°C (low = -1.0°C, high = -105.0°C) sensor = thermistor
temp4: +33.0°C (low = -74.0°C, high = +126.0°C) sensor = thermistor
temp5: +33.0°C (low = -49.0°C, high = +127.0°C) sensor = thermistor
temp6: +33.0°C (low = -82.0°C, high = -79.0°C) sensor = thermistor
intrusion0: ALARM
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +1.30 V
Vsoc: +0.90 V
CPU: +49.5°C (high = +70.0°C)
Tctl: +69.5°C
Icore: +77.94 A
Isoc: +9.02 A
it8665-isa-0290
Adapter: ISA adapter
in0: +1.36 V (min = +1.27 V, max = +2.00 V)
in1: +2.52 V (min = +2.76 V, max = +2.55 V)
in2: +2.04 V (min = +1.23 V, max = +0.16 V)
in3: +2.00 V (min = +1.53 V, max = +2.25 V)
in4: +0.03 V (min = +2.67 V, max = +2.43 V)
in5: +0.03 V (min = +2.39 V, max = +1.21 V)
in6: +0.03 V (min = +1.67 V, max = +0.56 V)
3VSB: +3.33 V (min = +2.46 V, max = +5.43 V)
Vbat: +3.25 V
+3.3V: +3.33 V
Fan CPU: 1044 RPM (min = 10 RPM)
Fan back: 722 RPM (min = 11 RPM)
Fan front: 633 RPM (min = 12 RPM)
fan5: 0 RPM (min = -1 RPM) ALARM
fan6: 0 RPM (min = -1 RPM) ALARM
CPU: +49.0°C (low = +112.0°C, high = -5.0°C)
Motherboard: +30.0°C (low = -33.0°C, high = -18.0°C) sensor = thermistor
temp3: +39.0°C (low = -1.0°C, high = -105.0°C) sensor = thermistor
temp4: +39.0°C (low = -74.0°C, high = +126.0°C) sensor = thermistor
temp5: +39.0°C (low = -49.0°C, high = +127.0°C) sensor = thermistor
temp6: +39.0°C (low = -82.0°C, high = -79.0°C) sensor = thermistor
intrusion0: ALARM
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +1.30 V
Vsoc: +0.90 V
CPU: +52.1°C (high = +70.0°C)
Tctl: +72.1°C
Icore: +78.98 A
Isoc: +9.02 A
=> I can see slight differences regarding CPU temperature and Vcore between it8665 and k10temp - especially on high load (kernel compile).
Thanks
Andreas
prev parent reply other threads:[~2020-01-21 6:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-18 17:26 Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 1/5] hwmon: (k10temp) Use bitops Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 2/5] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 3/5] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 4/5] hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs Guenter Roeck
2020-01-18 17:26 ` [PATCH v2 5/5] hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs Guenter Roeck
2020-01-19 0:33 ` [PATCH v2 0/5] hwmon: k10temp driver improvements Ken Moffat
2020-01-19 0:48 ` Guenter Roeck
2020-01-19 1:08 ` Ken Moffat
2020-01-19 3:13 ` Brad Campbell
2020-01-19 10:18 ` Jonathan McDowell
2020-01-19 15:46 ` Guenter Roeck
2020-01-19 19:38 ` Jonathan McDowell
2020-01-19 13:38 ` Holger Kiehl
2020-01-19 15:49 ` Guenter Roeck
2020-01-21 6:27 ` Andreas Hartmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c5d5aafb-282e-9ed1-ff1e-be6105446d39@01019freenet.de \
--to=andihartmann@01019freenet.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®