From: Stefan Agner <stefan@agner.ch>
To: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: a.zummo@towertech.it, rtc-linux@googlegroups.com,
shawn.guo@linaro.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND PATCHv2] drivers/rtc/rtc-snvs: Add clock support
Date: Thu, 04 Dec 2014 10:36:55 +0100 [thread overview]
Message-ID: <c1bf5bc1ac719833ab108cdc3509d881@agner.ch> (raw)
In-Reply-To: <bf8571fc7474877be39a5a4e9d4705358e63d840.1417585458.git.maitysanchayan@gmail.com>
On 2014-12-03 06:58, Sanchayan Maity wrote:
> This patch adds clock enable and disable support for
> the SNVS peripheral, which is required for using the
> RTC within the SNVS block.
>
> The clock is not strictly enforced, as this would
> break the i.MX devices. The clocking for the i.MX
> devices seems to be enabled elsewhere and enabling
> RTC SNVS for Vybrid results in a crash. This patch
> adds the clock support but also makes it optional
> so Vybrid platform can use the clock if defined
> while making sure not to break i.MX .
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> drivers/rtc/rtc-snvs.c | 34 ++++++++++++++++++++++++++++++++--
> 1 file changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
> index fa384fe..d4a6512 100644
> --- a/drivers/rtc/rtc-snvs.c
> +++ b/drivers/rtc/rtc-snvs.c
> @@ -17,6 +17,7 @@
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
> +#include <linux/clk.h>
>
> /* These register offsets are relative to LP (Low Power) range */
> #define SNVS_LPCR 0x04
> @@ -39,6 +40,7 @@ struct snvs_rtc_data {
> void __iomem *ioaddr;
> int irq;
> spinlock_t lock;
> + struct clk *clk;
> };
>
> static u32 rtc_read_lp_counter(void __iomem *ioaddr)
> @@ -260,6 +262,18 @@ static int snvs_rtc_probe(struct platform_device *pdev)
> if (data->irq < 0)
> return data->irq;
>
> + data->clk = devm_clk_get(&pdev->dev, "snvs-rtc");
> + if (IS_ERR(data->clk)) {
> + data->clk = NULL;
> + } else {
> + ret = clk_prepare_enable(data->clk);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Could not prepare or enable the snvs clock\n");
> + return ret;
> + }
> + }
> +
> platform_set_drvdata(pdev, data);
>
> spin_lock_init(&data->lock);
> @@ -280,7 +294,7 @@ static int snvs_rtc_probe(struct platform_device *pdev)
> if (ret) {
> dev_err(&pdev->dev, "failed to request irq %d: %d\n",
> data->irq, ret);
> - return ret;
> + goto error_rtc_device_register;
> }
>
> data->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
> @@ -288,10 +302,16 @@ static int snvs_rtc_probe(struct platform_device *pdev)
> if (IS_ERR(data->rtc)) {
> ret = PTR_ERR(data->rtc);
> dev_err(&pdev->dev, "failed to register rtc: %d\n", ret);
> - return ret;
> + goto error_rtc_device_register;
> }
>
> return 0;
> +
> +error_rtc_device_register:
> + if (data->clk)
> + clk_disable_unprepare(data->clk);
> +
> + return ret;
> }
>
> #ifdef CONFIG_PM_SLEEP
> @@ -302,16 +322,26 @@ static int snvs_rtc_suspend(struct device *dev)
> if (device_may_wakeup(dev))
> enable_irq_wake(data->irq);
>
> + if (data->clk)
> + clk_disable_unprepare(data->clk);
> +
> return 0;
> }
>
> static int snvs_rtc_resume(struct device *dev)
> {
> struct snvs_rtc_data *data = dev_get_drvdata(dev);
> + int ret;
>
> if (device_may_wakeup(dev))
> disable_irq_wake(data->irq);
>
> + if (data->clk) {
> + ret = clk_prepare_enable(data->clk);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
> #endif
Acked-by: Stefan Agner <stefan@agner.ch>
--
Stefan
next prev parent reply other threads:[~2014-12-04 9:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-03 5:58 [RESEND PATCHv2] Add SNVS clock support to rtc-snvs driver Sanchayan Maity
2014-12-03 5:58 ` [RESEND PATCHv2] drivers/rtc/rtc-snvs: Add clock support Sanchayan Maity
2014-12-04 9:36 ` Stefan Agner [this message]
2014-12-04 10:05 ` Alessandro Zummo
2014-12-04 12:29 ` Stefan Agner
2014-12-04 16:54 ` Alessandro Zummo
2014-12-05 0:12 ` Andrew Morton
2014-12-05 14:54 ` Stefan Agner
2014-12-05 21:44 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c1bf5bc1ac719833ab108cdc3509d881@agner.ch \
--to=stefan@agner.ch \
--cc=a.zummo@towertech.it \
--cc=linux-kernel@vger.kernel.org \
--cc=maitysanchayan@gmail.com \
--cc=rtc-linux@googlegroups.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome