Re: [PATCH RESEND v10 6/7] clk: baikal-t1: Add DDR/PCIe directly controlled resets support

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 22/08/2022 21:29, Serge Semin wrote:
> Aside with a set of the trigger-like resets Baikal-T1 CCU provides two
> additional blocks with directly controlled reset signals. In particular it
> concerns DDR full and initial resets and various PCIe sub-domains resets.
> Let's add the direct reset assertion/de-assertion of the corresponding
> flags support into the Baikal-T1 CCU driver then. It will be required at
> least for the PCIe platform driver. Obviously the DDR controller isn't
> supposed to be fully reset in the kernel, so the corresponding controls
> are added just for the sake of the interface implementation completeness.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> 
> ---
> 
> Changelog v6:
> - Refactor the code to support the linear reset IDs only. (@Philipp)
> 
> Changelog v7:
> - Drop empty line from the sys_rst_info structure initialization block.
>   (@Philipp)
> ---
>  drivers/clk/baikal-t1/ccu-rst.c     | 66 +++++++++++++++++++++++++++++
>  drivers/clk/baikal-t1/ccu-rst.h     | 10 +++++
>  include/dt-bindings/reset/bt1-ccu.h |  9 ++++

Do not mix drivers and bindings. Bindings always go separately, so this
has to be split.

Best regards,
Krzysztof