[PATCH v3 0/2] Asus ZenFone 2 Laser/Selfie includes a battery measured by voltage mode BMS and a simple GPIO hall effect sensor. The following commits include support for these components.

[PATCH v3 0/2] Asus ZenFone 2 Laser/Selfie includes a battery measured by voltage mode BMS and a simple GPIO hall effect sensor. The following commits include support for these components.

[Erikas Bitovtas]

Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
Changes in v3:
- Added multiple temperature points for ocv-capacity-celsius
- Added capacity tables for every temperature point
- Link to v2: https://lore.kernel.org/r/20251121-battery-hall-v2-0-d29e0828f214@gmail.com

Changes in v2:
- Reworded the battery commit to include a link to the downstream code
  on which it was based.
- Separated hall sensor pin configuration from gpio-keys.
- Link to v1: https://lore.kernel.org/r/20251115-battery-hall-v1-0-1586283d17c7@gmail.com

---
Erikas Bitovtas (2):
      arm64: dts: qcom: msm8939-asus-z00t: add battery
      arm64: dts: qcom: msm8939-asus-z00t: add hall sensor

 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 79 +++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)
---
base-commit: 82bcd04d124a4d84580ea4a8ba6b120db5f512e7
change-id: 20251208-b4-battery-hall-c707ae0d8ad4

Best regards,
-- 
Erikas Bitovtas <xerikasxx@gmail.com>

[PATCH v3 1/2] arm64: dts: qcom: msm8939-asus-z00t: add battery

[Erikas Bitovtas]

This device tracks remaining battery capacity percentage using voltage
mode BMS. This commit enables the pm8916_bms node and adds a battery
node to track its capacity. Battery properties were taken from the
information printed on the battery itself and downstream device tree
for a battery named "nvt+atl_3000mah" [1]

[1] https://github.com/Asus-MSM8916/android_kernel_asus_msm8916/blob/10.x/arch/arm/boot/dts/qcom/ASUS_ZE550KL_1936167_3000mAh_3p4COV_VBMS_Final.dtsi

Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 61 ++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
index ebb548e62e02..d0f0f80dd326 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
@@ -20,6 +20,61 @@ aliases {
 		serial0 = &blsp_uart2;
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+		energy-full-design-microwatt-hours = <11500000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		ocv-capacity-celsius = <(-20) 0 25 40 60>;
+		ocv-capacity-table-0 = <4378000 100>, <4220000 95>, <4125000 90>,
+			<4071000 85>, <3977000 80>, <3916000 75>, <3866000 70>,
+			<3838000 65>, <3822000 60>, <3809000 55>, <3797000 50>,
+			<3784000 45>, <3771000 40>, <3757000 35>, <3743000 30>,
+			<3726000 25>, <3707000 20>, <3688000 16>, <3670000 13>,
+			<3655000 11>, <3648000 10>, <3636000 9>, <3624000 8>,
+			<3612000 7>, <3592000 6>, <3569000 5>, <3540000 4>,
+			<3494000 3>, <3418000 2>, <3289000 1>, <3000000 0>;
+
+		ocv-capacity-table-1 = <4378000 100>, <4292000 95>, <4226000 90>,
+			<4166000 85>, <4109000 80>, <4064000 75>, <3992000 70>,
+			<3942000 65>, <3898000 60>, <3859000 55>, <3826000 50>,
+			<3802000 45>, <3788000 40>, <3779000 35>, <3768000 30>,
+			<3752000 25>, <3732000 20>, <3712000 16>, <3696000 13>,
+			<3688000 11>, <3684000 10>, <3680000 9>, <3675000 8>,
+			<3669000 7>, <3658000 6>, <3636000 5>, <3599000 4>,
+			<3544000 3>, <3466000 2>, <3341000 1>, <3000000 0>;
+
+		ocv-capacity-table-2 = <4372000 100>, <4306000 95>, <4247000 90>,
+			<4190000 85>, <4134000 80>, <4081000 75>, <4030000 70>,
+			<3984000 65>, <3930000 60>, <3884000 55>, <3850000 50>,
+			<3826000 45>, <3804000 40>, <3786000 35>, <3770000 30>,
+			<3753000 25>, <3734000 20>, <3712000 16>, <3693000 13>,
+			<3686000 11>, <3684000 10>, <3682000 9>, <3680000 8>,
+			<3676000 7>, <3668000 6>, <3643000 5>, <3600000 4>,
+			<3542000 3>, <3462000 2>, <3340000 1>, <3000000 0>;
+
+		ocv-capacity-table-3 = <4365000 100>, <4304000 95>, <4246000 90>,
+			<4189000 85>, <4133000 80>, <4080000 75>, <4030000 70>,
+			<3985000 65>, <3933000 60>, <3886000 55>, <3852000 50>,
+			<3827000 45>, <3806000 40>, <3789000 35>, <3769000 30>,
+			<3746000 25>, <3726000 20>, <3706000 16>, <3688000 13>,
+			<3681000 11>, <3678000 10>, <3676000 9>, <3676000 8>,
+			<3672000 7>, <3660000 6>, <3634000 5>, <3588000 4>,
+			<3528000 3>, <3448000 2>, <3322000 1>, <3000000 0>;
+
+		ocv-capacity-table-4 = <4358000 100>, <4298000 95>, <4240000 90>,
+			<4183000 85>, <4128000 80>, <4076000 75>, <4027000 70>,
+			<3983000 65>, <3935000 60>, <3887000 55>, <3852000 50>,
+			<3827000 45>, <3806000 40>, <3789000 35>, <3764000 30>,
+			<3738000 25>, <3715000 20>, <3695000 16>, <3677000 13>,
+			<3672000 11>, <3669000 10>, <3667000 9>, <3666000 8>,
+			<3662000 7>, <3652000 6>, <3622000 5>, <3577000 4>,
+			<3518000 3>, <3440000 2>, <3321000 1>, <3000000 0>;
+	};
+
 	chosen {
 		stdout-path = "serial0";
 	};
@@ -135,6 +190,12 @@ &mpss_mem {
 	reg = <0x0 0x86800000 0x0 0x5500000>;
 };
 
+&pm8916_bms {
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
 &pm8916_codec {
 	qcom,micbias-lvl = <2800>;
 	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;

-- 
2.52.0

[PATCH v3 2/2] arm64: dts: qcom: msm8939-asus-z00t: add hall sensor

[Erikas Bitovtas]

This device uses ANPEC APX9131 hall sensor. It is a basic GPIO hall
sensor for which a generic "gpio-keys" device tree node configuration
suffices.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
index d0f0f80dd326..ea90b00a2c8a 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
@@ -82,7 +82,7 @@ chosen {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-0 = <&gpio_hall_sensor_default>, <&gpio_keys_default>;
 		pinctrl-names = "default";
 
 		button-volume-up {
@@ -98,6 +98,15 @@ button-volume-down {
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <15>;
 		};
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			debounce-interval = <150>;
+		};
 	};
 
 	reg_sd_vmmc: regulator-sdcard-vmmc {
@@ -301,6 +310,13 @@ gpio_keys_default: gpio-keys-default-state {
 		bias-pull-up;
 	};
 
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";

-- 
2.52.0

Re: [PATCH v3 1/2] arm64: dts: qcom: msm8939-asus-z00t: add battery

[Konrad Dybcio]

On 12/8/25 3:59 PM, Erikas Bitovtas wrote:
> This device tracks remaining battery capacity percentage using voltage
> mode BMS. This commit enables the pm8916_bms node and adds a battery
> node to track its capacity. Battery properties were taken from the
> information printed on the battery itself and downstream device tree
> for a battery named "nvt+atl_3000mah" [1]
> 
> [1] https://github.com/Asus-MSM8916/android_kernel_asus_msm8916/blob/10.x/arch/arm/boot/dts/qcom/ASUS_ZE550KL_1936167_3000mAh_3p4COV_VBMS_Final.dtsi
> 
> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
> ---

Amazing, thanks

I checked a couple values and don't see any immediate issues

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v3 0/2] Asus ZenFone 2 Laser/Selfie includes a battery measured by voltage mode BMS and a simple GPIO hall effect sensor. The following commits include support for these components.

[Bjorn Andersson]

On Mon, 08 Dec 2025 16:59:19 +0200, Erikas Bitovtas wrote:
> 


Applied, thanks!

[1/2] arm64: dts: qcom: msm8939-asus-z00t: add battery
      commit: 094a6bbe84d43f04485d565f8174af66d90eb6a7
[2/2] arm64: dts: qcom: msm8939-asus-z00t: add hall sensor
      commit: 931b763e63b317d65f2555ea396f39bacba35b7d

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>