From: Komal Bajaj <quic_kbajaj@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Naina Mehta <quic_nainmeht@quicinc.com>
Subject: Re: [PATCH v5 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
Date: Thu, 23 Nov 2023 19:48:18 +0530 [thread overview]
Message-ID: <c63f3845-e9fd-9171-5d3b-d28b51db2c23@quicinc.com> (raw)
In-Reply-To: <CAA8EJpoR_C2PC7Juo2oXijuPrWgVXqeVffKwpWLqJD4a1Ay-NQ@mail.gmail.com>
On 11/20/2023 8:28 PM, Dmitry Baryshkov wrote:
> On Mon, 20 Nov 2023 at 15:48, Komal Bajaj <quic_kbajaj@quicinc.com> wrote:
>> Add DTS for Qualcomm qcs6490-rb3gen2 board which uses
>> QCS6490 SoC. This adds debug uart and usb support along
>> with regulators found on this board.
>>
>> Co-developed-by: Naina Mehta <quic_nainmeht@quicinc.com>
>> Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 410 +++++++++++++++++++
>> 2 files changed, 411 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 77babebe4904..4c0f9e4a2e5b 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> new file mode 100644
>> index 000000000000..f023dcf768f1
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> @@ -0,0 +1,410 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/* PM7250B is configured to use SID8/9 */
>> +#define PM7250B_SID 8
>> +#define PM7250B_SID1 9
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "sc7280.dtsi"
>> +#include "pm7250b.dtsi"
>> +#include "pm7325.dtsi"
>> +#include "pm8350c.dtsi"
>> +#include "pmk8350.dtsi"
>> +
>> +/delete-node/ &ipa_fw_mem;
>> +/delete-node/ &remoteproc_mpss;
>> +/delete-node/ &rmtfs_mem;
>> +/delete-node/ &video_mem;
>> +/delete-node/ &wlan_ce_mem;
>> +/delete-node/ &xbl_mem;
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
>> + compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
>> + chassis-type = "embedded";
>> +
>> + aliases {
>> + serial0 = &uart5;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
> The board definitely has some fixed-voltage regulators. At least the
> vph-pwr. Please describe them here.
Yes, Will add it here.
>
>> +
>> + reserved-memory {
>> + xbl_mem: xbl@80700000 {
>> + reg = <0x0 0x80700000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
>> + reg = <0x0 0x81800000 0x0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + camera_mem: camera@84300000 {
>> + reg = <0x0 0x84300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + wpss_mem: wpss@84800000 {
>> + reg = <0x0 0x84800000 0x0 0x1900000>;
>> + no-map;
>> + };
>> +
>> + adsp_mem: adsp@86100000 {
>> + reg = <0x0 0x86100000 0x0 0x2800000>;
>> + no-map;
>> + };
>> +
>> + cdsp_mem: cdsp@88900000 {
>> + reg = <0x0 0x88900000 0x0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + video_mem: video@8a700000 {
>> + reg = <0x0 0x8a700000 0x0 0x700000>;
>> + no-map;
>> + };
>> +
>> + cvp_mem: cvp@8ae00000 {
>> + reg = <0x0 0x8ae00000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + ipa_fw_mem: ipa-fw@8b300000 {
>> + reg = <0x0 0x8b300000 0x0 0x10000>;
>> + no-map;
>> + };
>> +
>> + ipa_gsi_mem: ipa-gsi@8b310000 {
>> + reg = <0x0 0x8b310000 0x0 0xa000>;
>> + no-map;
>> + };
>> +
>> + gpu_microcode_mem: gpu-microcode@8b31a000 {
>> + reg = <0x0 0x8b31a000 0x0 0x2000>;
>> + no-map;
>> + };
>> +
>> + tz_stat_mem: tz-stat@c0000000 {
>> + reg = <0x0 0xc0000000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + tags_mem: tags@c0100000 {
>> + reg = <0x0 0xc0100000 0x0 0x1200000>;
>> + no-map;
>> + };
>> +
>> + qtee_mem: qtee@c1300000 {
>> + reg = <0x0 0xc1300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + trusted_apps_mem: trusted_apps@c1800000 {
>> + reg = <0x0 0xc1800000 0x0 0x1c00000>;
>> + no-map;
>> + };
>> +
>> + debug_vm_mem: debug-vm@d0600000 {
>> + reg = <0x0 0xd0600000 0x0 0x100000>;
>> + no-map;
>> + };
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + regulators-0 {
>> + compatible = "qcom,pm7325-rpmh-regulators";
>> + qcom,pmic-id = "b";
> No supplies for any of the regulators? That's a pity.
Sorry for this, will update it.
>
>> +
>> + vreg_s1b_1p872: smps1 {
>> + regulator-min-microvolt = <1840000>;
>> + regulator-max-microvolt = <2040000>;
>> + };
>> +
>> + vreg_s2b_0p876: smps2 {
>> + regulator-min-microvolt = <570070>;
>> + regulator-max-microvolt = <1050000>;
>> + };
>> +
>> + vreg_s7b_0p972: smps7 {
>> + regulator-min-microvolt = <535000>;
>> + regulator-max-microvolt = <1120000>;
>> + };
>> +
>> + vreg_s8b_1p272: smps8 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
>> + };
>> +
>> + vreg_l1b_0p912: ldo1 {
>> + regulator-min-microvolt = <825000>;
>> + regulator-max-microvolt = <925000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2b_3p072: ldo2 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3b_0p504: ldo3 {
>> + regulator-min-microvolt = <312000>;
>> + regulator-max-microvolt = <910000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l4b_0p752: ldo4 {
>> + regulator-min-microvolt = <752000>;
>> + regulator-max-microvolt = <820000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + reg_l5b_0p752: ldo5 {
>> + regulator-min-microvolt = <552000>;
>> + regulator-max-microvolt = <832000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6b_1p2: ldo6 {
>> + regulator-min-microvolt = <1140000>;
>> + regulator-max-microvolt = <1260000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7b_2p952: ldo7 {
> Voltage ranges must be added here.
Yes. It was a mistake will add them.
>
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8b_0p904: ldo8 {
>> + regulator-min-microvolt = <870000>;
>> + regulator-max-microvolt = <970000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9b_1p2: ldo9 {
> Voltage ranges must be added here.
ACK
Thanks,
Komal
>
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11b_1p504: ldo11 {
>> + regulator-min-microvolt = <1504000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12b_0p751: ldo12 {
>> + regulator-min-microvolt = <751000>;
>> + regulator-max-microvolt = <824000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13b_0p53: ldo13 {
>> + regulator-min-microvolt = <530000>;
>> + regulator-max-microvolt = <824000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l14b_1p08: ldo14 {
>> + regulator-min-microvolt = <1080000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l15b_0p765: ldo15 {
>> + regulator-min-microvolt = <765000>;
>> + regulator-max-microvolt = <1020000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l16b_1p1: ldo16 {
>> + regulator-min-microvolt = <1100000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l17b_1p7: ldo17 {
>> + regulator-min-microvolt = <1700000>;
>> + regulator-max-microvolt = <1900000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l18b_1p8: ldo18 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l19b_1p8: ldo19 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-1 {
>> + compatible = "qcom,pm8350c-rpmh-regulators";
>> + qcom,pmic-id = "c";
>> +
>> + vreg_s1c_2p19: smps1 {
>> + regulator-min-microvolt = <2190000>;
>> + regulator-max-microvolt = <2210000>;
>> + };
>> +
>> + vreg_s2c_0p752: smps2 {
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <800000>;
>> + };
>> +
>> + vreg_s5c_0p752: smps5 {
>> + regulator-min-microvolt = <465000>;
>> + regulator-max-microvolt = <1050000>;
>> + };
>> +
>> + vreg_s7c_0p752: smps7 {
>> + regulator-min-microvolt = <465000>;
>> + regulator-max-microvolt = <800000>;
>> + };
>> +
>> + vreg_s9c_1p084: smps9 {
>> + regulator-min-microvolt = <1010000>;
>> + regulator-max-microvolt = <1170000>;
>> + };
>> +
>> + vreg_l1c_1p8: ldo1 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1980000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2c_1p62: ldo2 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <1980000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3c_2p8: ldo3 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <3540000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l4c_1p62: ldo4 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l5c_1p62: ldo5 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6c_2p96: ldo6 {
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7c_3p0: ldo7 {
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8c_1p62: ldo8 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9c_2p96: ldo9 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <35440000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l10c_0p88: ldo10 {
>> + regulator-min-microvolt = <720000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11c_2p8: ldo11 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12c_1p65: ldo12 {
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13c_2p7: ldo13 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_bob_3p296: bob {
>> + regulator-min-microvolt = <3008000>;
>> + regulator-max-microvolt = <3960000>;
>> + };
>> + };
>> +};
>> +
>> +&qupv3_id_0 {
>> + status = "okay";
>> +};
>> +
>> +&tlmm {
>> + gpio-reserved-ranges = <32 2>, /* ADSP */
>> + <48 4>; /* NFC */
>> +};
>> +
>> +&uart5 {
>> + compatible = "qcom,geni-debug-uart";
>> + status = "okay";
>> +};
>> +
>> +&usb_1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> + dr_mode = "peripheral";
>> +};
>> +
>> +&usb_1_hsphy {
>> + vdda-pll-supply = <&vreg_l10c_0p88>;
>> + vdda33-supply = <&vreg_l2b_3p072>;
>> + vdda18-supply = <&vreg_l1c_1p8>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_1_qmpphy {
>> + vdda-phy-supply = <&vreg_l6b_1p2>;
>> + vdda-pll-supply = <&vreg_l1b_0p912>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&wifi {
>> + memory-region = <&wlan_fw_mem>;
> Same question regarding the CE region.
>
>> +};
>> --
>> 2.42.0
>>
>>
>
prev parent reply other threads:[~2023-11-23 14:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 13:47 [PATCH v5 0/3] Add support for qcm6490 idp and qcs6490 rb3gen2 board Komal Bajaj
2023-11-20 13:47 ` [PATCH v5 1/3] dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board Komal Bajaj
2023-11-20 13:47 ` [PATCH v5 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts Komal Bajaj
2023-11-20 14:54 ` Dmitry Baryshkov
2023-11-23 14:06 ` Komal Bajaj
2023-11-20 13:47 ` [PATCH v5 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 " Komal Bajaj
2023-11-20 14:47 ` Caleb Connolly
2023-11-23 14:16 ` Komal Bajaj
2023-11-20 14:58 ` Dmitry Baryshkov
2023-11-23 14:18 ` Komal Bajaj [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c63f3845-e9fd-9171-5d3b-d28b51db2c23@quicinc.com \
--to=quic_kbajaj@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_nainmeht@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®